2011 Kia Rio Automatic Transmission Parts

This table covers the replacement filters for this application — the table heading and notes say which circuit. Typical signs include restricted flow — long cranking, weak airflow, or dirty fluid after a short interval. Seat the new filter so it cannot bypass, and use the grade the notes call for. Read more

8 Filter parts for the 2011 Kia Rio come from 6 brands — VAICO, FAMOUS BRAND, VARIOUS MFR and 3 other brands. The "Popular" part is RAYBESTOS POWERTRAIN 515932.

The Economy section lists 2 options from FAMOUS BRAND and VARIOUS MFR — the catalog's value-priced group. FAMOUS BRAND 96063L is listed in this group.

In the Standard Replacement grade, VAICO, RAYBESTOS POWERTRAIN, ATP and 1 other brand supply 6 parts: built to original-equipment specification. A representative part number is RAYBESTOS POWERTRAIN 515932.

Listed part numbers: RAYBESTOS POWERTRAIN 515932, FAMOUS BRAND 96063L and VARIOUS MFR PT1297, plus the other parts above.

This table covers the Fluid Cooler Line hoses. Typical signs include swelling, cracks, a soft spot, or a leak at a clamp. Replace adjacent aged hoses while the system is drained — they share the same heat cycle. Read more

2 Fluid Cooler Line / Hose parts for the 2011 Kia Rio come from SUNSONG.

This group includes SUNSONG 5802166 and SUNSONG 5802165.

This table covers the pans that hold automatic-transmission fluid. Read more

2 Fluid Pan parts are listed for the 2011 Kia Rio, from SKP and SPECTRA PREMIUM.

This group includes SKP SK265835 and SPECTRA PREMIUM TP0835.

This table covers the gaskets that seal the Fluid Pan. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Fluid Pan Gasket parts for the 2011 Kia Rio come from 3 brands — FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ.

Listed part numbers: FEL-PRO TOS18727, MAHLE / CLEVITE W32916 and VICTOR REINZ 711497300.

This table covers the precision wear sleeves used to restore a transmission pump seal surface. Read more

2 Fluid Pump Repair Sleeve parts are listed for the 2011 Kia Rio, from SCHAEFFLER and SKF.

This group includes SCHAEFFLER SR3502 and SKF 99182.

This table covers the seals at the Fluid Pump. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

One part is listed for the 2011 Kia Rio — SKF 16984.

This table covers the Fluid temperature sensors. Typical signs include hard cold starts, a fan that never comes on, or a gauge that disagrees with the scan tool. A sensor that reads open or shorted is usually the part; an implausible-but-smooth reading can be wiring. Read more

3 Fluid Temperature Sensor parts for the 2011 Kia Rio come from 3 brands — GPD, STANDARD MOTOR PRODUCTS and WELLS.

Part numbers include GPD 1814541, STANDARD MOTOR PRODUCTS TX300 and WELLS 5S7691.

This table covers the wear sleeves used to restore a Output Shaft seal surface. Read more

3 Output Shaft Repair Sleeve parts for the 2011 Kia Rio come from 3 brands — BCA, NATIONAL and WJB / INMOTION PARTS.

Part numbers include BCA NS99139, NATIONAL 99139 and WJB / INMOTION PARTS WS99139.

This table covers the seals at the Output Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

7 Output Shaft Seal parts for the 2011 Kia Rio come from 5 brands — SKF, WJB / INMOTION PARTS, BCA and 2 other brands. The "Popular" part is BCA NS710396.

Listed part numbers: BCA NS710396, NATIONAL 710396 and HYUNDAI 4311939020, plus the other parts above.

This table covers the rebuild kits for this assembly. Read more

One part is listed for the 2011 Kia Rio — TRANSTEC 81000114.

This table covers the Shift solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

One part is listed for the 2011 Kia Rio — STANDARD MOTOR PRODUCTS TCS155.

This table covers the wear sleeves used to restore a Torque Converter seal surface. Read more

4 Torque Converter Repair Sleeve parts are listed for the 2011 Kia Rio, from BCA, NATIONAL, SCHAEFFLER and 1 other brand.

Listed part numbers: BCA NS99157, NATIONAL 99157 and SCHAEFFLER SR3483, plus the other parts above.

This table covers the seals at the Torque Converter Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Torque Converter Shaft Seal parts are listed for the 2011 Kia Rio, from BCA, NATIONAL, SCHAEFFLER and 1 other brand.

This group includes BCA NS320583, NATIONAL 320583 and SCHAEFFLER SS3759 and the remaining parts above.

This table covers the automatic-transmission fluids specified for this gearbox. Typical signs include harsh or delayed shifts, fluid that smells burnt, or a shudder at light throttle. Use exactly the specification in the notes. Automatic transmissions are unforgiving of the wrong fluid. Read more

12 Transmission Fluid parts for the 2011 Kia Rio come from 7 brands — VALVOLINE, PENTOSIN, MOBIL and 4 other brands. The "Popular" part is MOBIL 126505.

The ATF +4 section lists 2 options from PENTOSIN — grouped under the catalog's "ATF +4" designation — the notes column spells out what sets them apart. PENTOSIN 1058112 is listed in this group.

The Multi-Vehicle section lists 6 options from VALVOLINE, MOBIL and LUBEGARD — grouped under the catalog's "Multi-Vehicle" designation — the notes column spells out what sets them apart. MOBIL 126505 is listed in this group.

The SP-III (SP3) section lists 2 options from BECK/ARNLEY and IDEMITSU — grouped under the catalog's "SP-III (SP3)" designation — the notes column spells out what sets them apart. BECK/ARNLEY 2522003 is listed in this group.

In the SP-IV (SP 4) grade, AISIN supplies 1 part: grouped under the catalog's "SP-IV (SP 4)" designation — the notes column spells out what sets them apart. A representative part number is AISIN ATFSP4.

1 further part sits outside the graded sections, with the same engine-level match.

This table covers the conditioners and additives used with this transmission fluid. Read more

8 Transmission Fluid Additive parts for the 2011 Kia Rio come from LUBEGARD. The "Popular" part is LUBEGARD 19610.

Listed part numbers: LUBEGARD 19610, LUBEGARD 60902 and LUBEGARD 19689, plus the other parts above.

This table covers the mounts that hold the transmission to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

7 Transmission Mount parts are listed for the 2011 Kia Rio, from SKP, ULTRA-POWER, ANCHOR and 4 other brands. ANCHOR 9308 carries the "Popular" badge.

Economy: 2 parts, from SKP and ULTRA-POWER. A representative part number is SKP SKM9308.

The Standard Replacement section: 5 options from ANCHOR, WESTAR, BECK/ARNLEY and 2 other brands. ANCHOR 9308 is listed in this group.

Part numbers include ANCHOR 9308 and SKP SKM9308, among others listed above.