2018 Kia Rio Drivetrain Parts

Engine:
1.6L L4

This page lists 17 drivetrain parts for the 2018 Kia Rio, across 2 part types, covering the 1.6L L4 engine. Every part shows its brand, manufacturer part number and fitment notes.

On the 2018 Kia Rio, the drivetrain system moves power from transmission to wheels through axles, CV joints, driveshafts, differentials and wheel-end hardware. All 17 listed parts are CV Axle (14 parts) and Differential Carrier Bearing / Race (3 parts).

CV Axle

Brand Part Number Markets Notes Buy
APWI Popular KA8035A
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Front LeftAutomatic trans.
View on
Amazon
APWI Popular HY8408A
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Front RightAutomatic trans.
View on
Amazon
TOP NOTCH Popular TN60085
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Front LeftAutomatic trans.
View on
Amazon
GSP NCV37163
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Front LeftManual Trans.
View on
Amazon
GSP NCV37162
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Front RightManual trans.
View on
Amazon
GSP NCV37137
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Front LeftAutomatic trans.
View on
Amazon
GSP NCV37136
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Front RightAutomatic trans.
View on
Amazon
TOP NOTCH TN60107
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Front LeftManual Trans.
View on
Amazon
TOP NOTCH TN60106
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Front RightManual trans.
View on
Amazon
TOP NOTCH TN60084
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Front RightAutomatic trans.
View on
Amazon
TRAKMOTIVE HY86012
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Front LeftAutomatic trans.
View on
Amazon
TRAKMOTIVE HY86011
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Front LeftManual Trans.
View on
Amazon
TRAKMOTIVE HY86013
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Front RightManual trans.
View on
Amazon
TRAKMOTIVE HY86014
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Front RightAutomatic trans.
View on
Amazon

This table covers the complete CV axle shafts from differential (or hub) to wheel. Typical signs include a click in tight turns, grease flung around the wheel well, or a vibration that builds with speed. A torn boot caught early is a boot kit; caught late it is the whole axle. Torque the axle nut to the method in the notes.

Differential Carrier Bearing / Race

Economy

Brand Part Number Markets Notes Buy
WJB / INMOTION PARTS RB6207
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Manual trans.Mitsubishi trans.
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
BCA WE61445
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Manual trans.
View on
Amazon
NATIONAL 207
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Manual trans.Mitsubishi trans.
View on
Amazon

This table covers the bearings and races that support the differential carrier.

Buying Drivetrain Parts for a 2018 Kia Rio

On this vehicle, the drivetrain system moves power from transmission to wheels through axles, CV joints, driveshafts, differentials and wheel-end hardware.

  • Confirm you have the 1.6L L4 engine — every part on this page is matched to it.
  • Read the notes on each row for position, trim and spec qualifiers before you order.
  • Where labor overlaps, replace the differential or transfer-case fluid with any axle or seal job while everything is already open.
  • Cross-reference the manufacturer part number against your old part or a service-manual listing.

Start with the largest groups on this page: CV Axle and Differential Carrier Bearing / Race .

Frequently Asked Questions

How many drivetrain parts fit the 2018 Kia Rio?

Our catalog currently lists 17 drivetrain parts for the 2018 Kia Rio across 2 subcategories and 7 brands, covering the 1.6L L4 engine. Each part is matched to the engine(s) it fits.

What are the signs of drivetrain problems on a 2018 Kia Rio?

Common symptoms include clicking in tight turns, a clunk when shifting between drive and reverse, vibration that builds with speed, or gear oil on the inside of a wheel. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.

What should I replace at the same time?

Where labor overlaps, replace the differential or transfer-case fluid with any axle or seal job while everything is already open.

What do the market flags (US, CA, MX) on each part mean?

They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2018 Kia Rio was originally sold in the US, the safest choice is a part marked for the US market.

How do I make sure a part fits my 2018 Kia Rio?

Every part on this page is matched to the 1.6L L4 engine. Then a torn CV boot caught early is a cheap boot kit; caught late it is a whole axle — inspect before deciding which to buy. The notes column carries position and trim qualifiers where they apply.

Other Parts for the 2018 Kia Rio

Drivetrain Parts for Other Kia Rio Years

Switch vehicle or jump to a subcategory

Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.