2018 Kia Rio Engine Parts

This table covers the camshafts that open the valves. Read more

One part is listed for the 2018 Kia Rio — HYUNDAI 241002B660.

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: SCHAEFFLER SS2449.

This table covers the connecting rods between each piston and the crankshaft. Read more

2 Connecting Rod parts are listed for the 2018 Kia Rio, from HYUNDAI and TOPLINE.

Part numbers include HYUNDAI 235102B010 and TOPLINE CRHY22.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

5 Connecting Rod Bearing parts are listed for the 2018 Kia Rio, from ENGINETECH, ITM ENGINE COMPONENTS, KING ENGINE BEARINGS and 2 other brands. ENGINETECH BB1430 carries the "Popular" badge.

This group includes ENGINETECH BB1430, ITM ENGINE COMPONENTS 4B1631 and KING ENGINE BEARINGS CR4575SM and the remaining parts above.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

5 Conversion / Lower Gasket Set parts are listed for the 2018 Kia Rio, from ENGINETECH, AJUSA, APEX and 2 other brands. ENGINETECH HY16CSB carries the "Popular" badge.

This group includes ENGINETECH HY16CSB, AJUSA 54244600 and APEX ACS13014 and the remaining parts above.

This table covers the crankshafts that turn piston motion into rotation. Read more

One part is listed for the 2018 Kia Rio — TOPLINE CSHY22L.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

5 Crankshaft Main Bearing parts for the 2018 Kia Rio come from 4 brands — TOPLINE, ENGINETECH, ITM ENGINE COMPONENTS and 1 other brand. The "Popular" part is ENGINETECH BC1017.

Part numbers include ENGINETECH BC1017, ITM ENGINE COMPONENTS 5M9386 and KING ENGINE BEARINGS MB5706SI, among others listed above.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

This group shows a single part: WJB / INMOTION PARTS WS99103.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

16 Crankshaft Seal parts for the 2018 Kia Rio come from 8 brands — VICTOR REINZ, FEL-PRO, NATIONAL and 5 other brands. The "Popular" part is FEL-PRO TCS46166.

This table covers the bolts that clamp the cylinder head to the block. Read more

4 Cylinder Head Bolt parts are listed for the 2018 Kia Rio, from AJUSA, APEX, FEL-PRO and 1 other brand.

This group includes AJUSA 81061400, APEX AHB1326 and FEL-PRO ES72497 and the remaining parts above.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

8 Cylinder Head Gasket parts are listed for the 2018 Kia Rio, from FEL-PRO, ITM ENGINE COMPONENTS, AJUSA and 5 other brands. FEL-PRO 26554PT carries the "Popular" badge.

This group includes FEL-PRO 26554PT, ITM ENGINE COMPONENTS 0941132 and AJUSA 10197100 and the remaining parts above.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

8 Cylinder Head Gasket Set parts are listed for the 2018 Kia Rio, from ENGINETECH, FEL-PRO, APEX and 3 other brands. APEX AHS13026 carries the "Popular" badge.

Listed part numbers: APEX AHS13026, ITM ENGINE COMPONENTS 0910929 and ELRING 925610, plus the other parts above.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

2 Engine Block Heater parts for the 2018 Kia Rio come from KAT'S HEATERS.

Listed part numbers: KAT'S HEATERS 11812 and KAT'S HEATERS 28812.

This table covers the Engine covers. Read more

One part is listed for the 2018 Kia Rio — TECHPRO KI1228161.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

5 Engine Kit Gasket Set parts are listed for the 2018 Kia Rio, from ELRING, ITM ENGINE COMPONENTS, ENGINETECH and 1 other brand. ITM ENGINE COMPONENTS 0900322 carries the "Popular" badge.

Listed part numbers: ITM ENGINE COMPONENTS 0900322, ELRING 925630 and ELRING 550130, plus the other parts above.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

4 Exhaust Valve parts for the 2018 Kia Rio come from 4 brands — HYUNDAI, ITM ENGINE COMPONENTS, MELLING and 1 other brand.

Listed part numbers: HYUNDAI 222122B000, ITM ENGINE COMPONENTS RX9229 and MELLING V5566, plus the other parts above.

This table covers the followers that drive a mechanical fuel pump off the camshaft. Read more

One part is listed for the 2018 Kia Rio — WELLS 5T5017.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

6 Harmonic Balancer parts are listed for the 2018 Kia Rio, from HYUNDAI, ATP, HL MANDO and 2 other brands. HYUNDAI 231242B020 carries the "Popular" badge.

Part numbers include HYUNDAI 231242B020, ATP 102357 and HL MANDO 30A5006, among others listed above.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

7 Intake Manifold Gasket parts are listed for the 2018 Kia Rio, from APEX, FEL-PRO, AJUSA and 4 other brands. APEX AMS13140 carries the "Popular" badge.

This group includes APEX AMS13140, FEL-PRO MS97228 and AJUSA 13275000 and the remaining parts above.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

5 Intake Valve parts for the 2018 Kia Rio come from 5 brands — MELLING, ENGINETECH, HYUNDAI and 2 other brands. The "Popular" part is MELLING V5564.

Part numbers include MELLING V5564, ENGINETECH V2200 and HYUNDAI 222112B400, among others listed above.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

3 Motor Mount parts for the 2018 Kia Rio come from 3 brands — ANCHOR, DEA / MARMON RIDE CONTROL and PIONEER.

Part numbers include ANCHOR 10184, DEA / MARMON RIDE CONTROL A71137 and PIONEER 610184.

This table covers the Motor Mount kits. Read more

2 Motor Mount Kit parts for the 2018 Kia Rio come from ANCHOR.

Listed part numbers: ANCHOR 300876 and ANCHOR 300875.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

102 Oil parts for the 2018 Kia Rio come from 7 brands — VALVOLINE, LIQUI MOLY, MOBIL and 4 other brands. The "Popular" part is MOBIL 125195. Grades run from Conventional through Synthetic Blend; Full Synthetic is the most populated section, led by LIQUI MOLY, VALVOLINE, MOBIL and 3 other brands.

This table covers the drain plugs in the oil pan. Read more

9 Oil Drain Plug parts for the 2018 Kia Rio come from 5 brands — DORMAN, AGS, ELRING and 2 other brands. The "Popular" part is DORMAN 090033.

Listed part numbers: DORMAN 090033, DORMAN 090053 and AGS ODP00007, plus the other parts above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Oil Drain Plug Gasket parts are listed for the 2018 Kia Rio, from DORMAN, ELRING, FEL-PRO and 1 other brand. DORMAN 095147 carries the "Popular" badge.

Part numbers include DORMAN 095147, DORMAN 995147CD and ELRING 726760, among others listed above.

This table covers the caps on the oil filler neck. Read more

4 Oil Filler Cap parts for the 2018 Kia Rio come from 4 brands — CALORSTAT, GATES, MOTORAD and 1 other brand.

Listed part numbers: CALORSTAT OC2331, GATES 31083 and MOTORAD MO151, plus the other parts above.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

22 Oil Filter parts for the 2018 Kia Rio come from 17 brands — BOSCH, VARIOUS MFR, WIX and 14 other brands. The "Popular" part is MOBIL M1104A.

The Economy section lists 5 options from BOSCH, FRAM, FVP and 2 other brands — the catalog's value-priced group. BOSCH 72228WS is listed in this group.

The High Performance / Heavy Duty section lists 2 options from MOBIL and WIX — grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. MOBIL M1104A is listed in this group.

In the Standard Replacement grade, ACKOJA, HYUNDAI, BOSCH and 10 other brands supply 15 parts: built to original-equipment specification. A representative part number is BOSCH 3312.

This table covers the oil pans that hold the engine's oil sump. Read more

5 Oil Pan parts are listed for the 2018 Kia Rio, from ULTRA-POWER, AUTOTECNICA, DORMAN and 2 other brands. ULTRA-POWER 264464 carries the "Popular" badge.

This group includes ULTRA-POWER 264464 and AUTOTECNICA HY1416216 and the remaining parts above.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: VICTOR REINZ 703141410.

This table covers the Oil pumps. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit. Read more

5 Oil Pump parts for the 2018 Kia Rio come from 5 brands — ULTRA-POWER, MELLING, ENGINETECH and 2 other brands. The "Popular" part is MELLING M526.

The Economy section: 1 option from ULTRA-POWER. ULTRA-POWER M526 is listed in this group.

Standard Replacement: 4 parts, from MELLING, ENGINETECH, ITM ENGINE COMPONENTS and 1 other brand. A representative part number is MELLING M526.

This group includes MELLING M526 and ENGINETECH EP2215 and the remaining parts above.

This table covers the pickup tubes and screens that feed the oil pump. Read more

One part is listed for the 2018 Kia Rio — MELLING 403S.

This table covers the pistons that travel in each cylinder. Typical signs include knock, blow-by, or a cylinder that will not hold compression. Piston work is a short-block job. Match bore, pin and ring pack in the notes — not the photo. Read more

3 Piston parts are listed for the 2018 Kia Rio, from ENGINETECH and TOPLINE.

The Premium section lists 2 options from ENGINETECH — a step above OE specification in materials, tolerances or warranty terms. ENGINETECH P15124 is listed in this group.

The Standard Replacement section: 1 option from TOPLINE. TOPLINE PAHY22L is listed in this group.

This group includes ENGINETECH P15124, ENGINETECH K15124P and TOPLINE PAHY22L.

This table covers the rings that seal each piston to the cylinder wall. Read more

5 Piston Ring parts are listed for the 2018 Kia Rio, from HASTINGS MANUFACTURING, ENGINETECH, TOPLINE and 1 other brand. HASTINGS MANUFACTURING 2C4504 carries the "Popular" badge.

The Premium section: 1 option from ENGINETECH. ENGINETECH M30314 is listed in this group.

The Standard Replacement section: 3 options from HASTINGS MANUFACTURING and TOPLINE. HASTINGS MANUFACTURING 2C4504 is listed in this group.

1 ungrouped part is not assigned to a grade, with the same engine-level match.

This group includes HASTINGS MANUFACTURING 2C4504, ENGINETECH M30314 and HASTINGS MANUFACTURING 2C4504S and the remaining parts above.

This table covers the Thrust washers. Read more

2 Thrust Washer parts for the 2018 Kia Rio come from 2 brands — ENGINETECH and ITM ENGINE COMPONENTS.

Part numbers include ENGINETECH TW1017 and ITM ENGINE COMPONENTS 1T4312STD.

This table covers the timing chains that keep the cams in time with the crank. Read more

4 Timing Chain parts are listed for the 2018 Kia Rio, from CLOYES, HYUNDAI, MELLING and 1 other brand.

Part numbers include CLOYES C967, HYUNDAI 243212B620 and MELLING 967, among others listed above.

This table covers kits that group a timing chain with the related tensioners and guides. Read more

9 Timing Chain & Component Kit parts for the 2018 Kia Rio come from 7 brands — CLOYES, MELLING, PREFERRED COMPONENTS INC and 4 other brands. The "Popular" part is CLOYES 90967S.

The Economy section: 1 option from PREFERRED COMPONENTS INC. PREFERRED COMPONENTS INC TS15124 is listed in this group.

Standard Replacement: 7 parts, from CLOYES, MELLING, ACKOJA and 2 other brands. A representative part number is CLOYES 90967S.

1 further part sits outside the graded sections, with the same engine-level match.

Listed part numbers: CLOYES 90967S, PREFERRED COMPONENTS INC TS15124 and ACKOJA A5210006, plus the other parts above.

This table covers the guides and dampers that keep the timing chain on its path. Read more

7 Timing Chain Guide / Damper parts are listed for the 2018 Kia Rio, from CLOYES, MELLING, PREFERRED COMPONENTS INC and 1 other brand. CLOYES 96092 carries the "Popular" badge.

Part numbers include CLOYES 96092, MELLING BT6092 and CLOYES 96093, among others listed above.