2018 Kia Soul Engine Parts

This table covers the camshafts that open the valves. Read more

2 Camshaft parts for the 2018 Kia Soul come from HYUNDAI.

Part numbers include HYUNDAI 241002B660 and HYUNDAI 242002B760.

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

One part is listed for the 2018 Kia Soul — ELRING 127610.

This table covers the connecting rods between each piston and the crankshaft. Read more

4 Connecting Rod parts for the 2018 Kia Soul come from 2 brands — TOPLINE and HYUNDAI.

Part numbers include HYUNDAI 235102B010, TOPLINE CRHY22 and TOPLINE CRHY22T, among others listed above.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

8 Connecting Rod Bearing parts for the 2018 Kia Soul come from 5 brands — TOPLINE, ENGINETECH, ITM ENGINE COMPONENTS and 2 other brands. The "Popular" part is ENGINETECH BB1430.

Part numbers include ENGINETECH BB1430, ENGINETECH BB1100 and ITM ENGINE COMPONENTS 4B1631, among others listed above.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

13 Conversion / Lower Gasket Set parts for the 2018 Kia Soul come from 9 brands — AJUSA, APEX, ENGINETECH and 6 other brands. The "Popular" part is AJUSA 54244600.

This table covers the crankshafts that turn piston motion into rotation. Read more

3 Crankshaft parts for the 2018 Kia Soul come from TOPLINE.

This group includes TOPLINE CSHY22L, TOPLINE CSHY22T and TOPLINE CSHY23R.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

9 Crankshaft Main Bearing parts are listed for the 2018 Kia Soul, from TOPLINE, ENGINETECH, ITM ENGINE COMPONENTS and 1 other brand. ENGINETECH BC1017 carries the "Popular" badge.

Part numbers include ENGINETECH BC1017, ENGINETECH BC1101 and ITM ENGINE COMPONENTS 5M9386, among others listed above.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

5 Crankshaft Repair Sleeve parts are listed for the 2018 Kia Soul, from WJB / INMOTION PARTS, BCA and NATIONAL.

Listed part numbers: BCA NS99157, NATIONAL 99157 and WJB / INMOTION PARTS WS99103, plus the other parts above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

34 Crankshaft Seal parts are listed for the 2018 Kia Soul, from ELRING, VICTOR REINZ, FEL-PRO and 7 other brands. ELRING 902760 carries the "Popular" badge. The notes list position, dimensions and spec qualifiers wherever the manufacturer distinguishes between variants.

This table covers the bolts that clamp the cylinder head to the block. Read more

9 Cylinder Head Bolt parts for the 2018 Kia Soul come from 6 brands — AJUSA, FEL-PRO, TOPLINE and 3 other brands. The "Popular" part is ENGINETECH HB307.

Listed part numbers: ENGINETECH HB307, AJUSA 81061400 and AJUSA 81066700, plus the other parts above.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

19 Cylinder Head Gasket parts for the 2018 Kia Soul come from 8 brands — ELRING, APEX, MAHLE / CLEVITE and 5 other brands. The "Popular" part is APEX AHG1326.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

18 Cylinder Head Gasket Set parts for the 2018 Kia Soul come from 8 brands — ENGINETECH, AJUSA, ELRING and 5 other brands. The "Popular" part is APEX AHS13026.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

KAT'S HEATERS supplies both parts for the 2018 Kia Soul.

Part numbers include KAT'S HEATERS 11812 and KAT'S HEATERS 28812.

This table covers the Engine covers. Read more

6 Engine Cover parts for the 2018 Kia Soul come from 2 brands — TECHPRO and VARIOUS MFR. The "Popular" part is TECHPRO KI1228146.

This group includes TECHPRO KI1228146, TECHPRO KI1228148 and TECHPRO KI1228144 and the remaining parts above.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

11 Engine Kit Gasket Set parts for the 2018 Kia Soul come from 4 brands — AJUSA, ELRING, TOPLINE and 1 other brand. The "Popular" part is ENGINETECH HY16K1.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

7 Exhaust Valve parts are listed for the 2018 Kia Soul, from HYUNDAI, MELLING, TOPLINE and 1 other brand.

Part numbers include HYUNDAI 222122B000, HYUNDAI 222122E000 and ITM ENGINE COMPONENTS RX9229, among others listed above.

This table covers the followers that drive a mechanical fuel pump off the camshaft. Read more

2 Fuel Pump Camshaft Follower parts for the 2018 Kia Soul come from 2 brands — STANDARD MOTOR PRODUCTS and WELLS.

Part numbers include STANDARD MOTOR PRODUCTS GDF401 and WELLS 5T5017.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

12 Harmonic Balancer parts for the 2018 Kia Soul come from 7 brands — HYUNDAI, ATP, HL MANDO and 4 other brands. The "Popular" part is HYUNDAI 231242B020.

This table covers the Intake Manifold actuators. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same. Read more

2 Intake Manifold Actuator parts for the 2018 Kia Soul come from STANDARD MOTOR PRODUCTS.

Part numbers include STANDARD MOTOR PRODUCTS IMA147 and STANDARD MOTOR PRODUCTS IMA145.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

12 Intake Manifold Gasket parts for the 2018 Kia Soul come from 7 brands — ELRING, MAHLE / CLEVITE, AJUSA and 4 other brands. The "Popular" part is APEX AMS13140.

This table covers the gaskets that seal the Intake Plenum. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

ELRING supplies both parts for the 2018 Kia Soul.

Listed part numbers: ELRING 853640 and ELRING 883790.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

8 Intake Valve parts are listed for the 2018 Kia Soul, from MELLING, HYUNDAI, TOPLINE and 2 other brands. MELLING V5564 carries the "Popular" badge.

Listed part numbers: MELLING V5564, ENGINETECH V2200 and HYUNDAI 222112B400, plus the other parts above.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

8 Motor Mount parts are listed for the 2018 Kia Soul, from ANCHOR, PIONEER, WESTAR and 2 other brands. SKP SKM10010 carries the "Popular" badge.

In the Economy grade, SKP supplies 1 part: the catalog's value-priced group. A representative part number is SKP SKM10010.

The Standard Replacement section lists 4 options from ANCHOR, DEA / MARMON RIDE CONTROL, PIONEER and 1 other brand — built to original-equipment specification. ANCHOR 10010 is listed in this group.

3 ungrouped parts are not assigned to a grade, with the same engine-level match.

Part numbers include SKP SKM10010, ANCHOR 10010 and DEA / MARMON RIDE CONTROL A71065, among others listed above.

This table covers the Motor Mount kits. Read more

ANCHOR supplies both parts for the 2018 Kia Soul.

This group includes ANCHOR 300185 and ANCHOR 300186.