2019 Kia Soul Engine Parts

This table covers the camshafts that open the valves. Read more

HYUNDAI supplies both parts for the 2019 Kia Soul.

Part numbers include HYUNDAI 241002B660 and HYUNDAI 242002B760.

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: ELRING 127610.

This table covers the connecting rods between each piston and the crankshaft. Read more

4 Connecting Rod parts are listed for the 2019 Kia Soul, from TOPLINE and HYUNDAI.

Part numbers include HYUNDAI 235102B010, TOPLINE CRHY22 and TOPLINE CRHY22T, among others listed above.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

8 Connecting Rod Bearing parts are listed for the 2019 Kia Soul, from TOPLINE, ENGINETECH, ITM ENGINE COMPONENTS and 2 other brands. ENGINETECH BB1430 carries the "Popular" badge.

This group includes ENGINETECH BB1430, ENGINETECH BB1100 and ITM ENGINE COMPONENTS 4B1631 and the remaining parts above.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

13 Conversion / Lower Gasket Set parts are listed for the 2019 Kia Soul, from AJUSA, APEX, ENGINETECH and 6 other brands. AJUSA 54244600 carries the "Popular" badge.

This table covers the crankshafts that turn piston motion into rotation. Read more

TOPLINE supplies the 3 Crankshaft parts for the 2019 Kia Soul.

Listed part numbers: TOPLINE CSHY22L, TOPLINE CSHY22T and TOPLINE CSHY23R.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

8 Crankshaft Main Bearing parts for the 2019 Kia Soul come from 3 brands — TOPLINE, ENGINETECH and KING ENGINE BEARINGS.

Listed part numbers: ENGINETECH BC1017, ENGINETECH BC1101 and KING ENGINE BEARINGS MB5706SI, plus the other parts above.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

5 Crankshaft Repair Sleeve parts for the 2019 Kia Soul come from 3 brands — WJB / INMOTION PARTS, BCA and NATIONAL.

Part numbers include BCA NS99157, NATIONAL 99157 and WJB / INMOTION PARTS WS99103, among others listed above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

33 Crankshaft Seal parts for the 2019 Kia Soul come from 10 brands — ELRING, VICTOR REINZ, FEL-PRO and 7 other brands. The "Popular" part is FEL-PRO TCS46166. A list this long means Crankshaft Seal applications vary by configuration — the notes carry the qualifiers.

This table covers the bolts that clamp the cylinder head to the block. Read more

9 Cylinder Head Bolt parts are listed for the 2019 Kia Soul, from AJUSA, FEL-PRO, TOPLINE and 3 other brands. ENGINETECH HB307 carries the "Popular" badge.

This group includes ENGINETECH HB307, AJUSA 81061400 and AJUSA 81066700 and the remaining parts above.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

18 Cylinder Head Gasket parts are listed for the 2019 Kia Soul, from AJUSA, ELRING, MAHLE / CLEVITE and 5 other brands. APEX AHG1326 carries the "Popular" badge.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

16 Cylinder Head Gasket Set parts are listed for the 2019 Kia Soul, from ENGINETECH, MAHLE / CLEVITE, AJUSA and 4 other brands. APEX AHS13026 carries the "Popular" badge.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

2 Engine Block Heater parts for the 2019 Kia Soul come from KAT'S HEATERS.

Part numbers include KAT'S HEATERS 11812 and KAT'S HEATERS 28812.

This table covers the Engine covers. Read more

TECHPRO supplies the 3 Engine Cover parts for the 2019 Kia Soul.

Listed part numbers: TECHPRO KI1228148, TECHPRO KI1228139 and TECHPRO KI1228147.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

11 Engine Kit Gasket Set parts are listed for the 2019 Kia Soul, from AJUSA, TOPLINE, ENGINETECH and 1 other brand. ENGINETECH HY18K2 carries the "Popular" badge.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

6 Exhaust Valve parts for the 2019 Kia Soul come from 3 brands — HYUNDAI, MELLING and TOPLINE.

This group includes HYUNDAI 222122B000, HYUNDAI 222122E000 and MELLING V5566 and the remaining parts above.

This table covers the followers that drive a mechanical fuel pump off the camshaft. Read more

One part is listed for the 2019 Kia Soul — WELLS 5T5017.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

10 Harmonic Balancer parts are listed for the 2019 Kia Soul, from HYUNDAI, ATP, HL MANDO and 4 other brands. HYUNDAI 231232B720 carries the "Popular" badge.

This table covers the Intake Manifold actuators. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same. Read more

STANDARD MOTOR PRODUCTS supplies both parts for the 2019 Kia Soul.

Listed part numbers: STANDARD MOTOR PRODUCTS IMA147 and STANDARD MOTOR PRODUCTS IMA145.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

12 Intake Manifold Gasket parts are listed for the 2019 Kia Soul, from ELRING, MAHLE / CLEVITE, AJUSA and 4 other brands. APEX AMS13140 carries the "Popular" badge.

This table covers the Intake Manifold Runner Control Valve solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

One part is listed for the 2019 Kia Soul — STANDARD MOTOR PRODUCTS IMRC23.

This table covers the gaskets that seal the Intake Plenum. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Intake Plenum Gasket parts for the 2019 Kia Soul come from ELRING.

Part numbers include ELRING 853640 and ELRING 883790.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

7 Intake Valve parts for the 2019 Kia Soul come from 4 brands — HYUNDAI, MELLING, TOPLINE and 1 other brand.

This group includes ENGINETECH V2200, HYUNDAI 222112B400 and HYUNDAI 222112E400 and the remaining parts above.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

8 Motor Mount parts for the 2019 Kia Soul come from 5 brands — ANCHOR, PIONEER, WESTAR and 2 other brands. The "Popular" part is SKP SKM10010.

The Economy section lists 1 option from SKP — the catalog's value-priced group. SKP SKM10010 is listed in this group.

In the Standard Replacement grade, ANCHOR, DEA / MARMON RIDE CONTROL, PIONEER and 1 other brand supply 4 parts: built to original-equipment specification. A representative part number is ANCHOR 10010.

3 further parts sit outside the graded sections, with the same engine-level match.

Listed part numbers: SKP SKM10010, ANCHOR 10010 and DEA / MARMON RIDE CONTROL A71065, plus the other parts above.

This table covers the Motor Mount kits. Read more

2 Motor Mount Kit parts for the 2019 Kia Soul come from ANCHOR.

This group includes ANCHOR 300185 and ANCHOR 300186.