2020 Kia Stinger Cooling System Parts

This table covers the engine coolants and antifreeze formulations specified for this cooling system. Typical signs include a rising temperature gauge, rusty or sludged coolant, or a heater that blows cold. Use the chemistry named in the notes. Mixing silicate, OAT and HOAT formulas can gel in the radiator. Read more

14 Coolant / Antifreeze parts are listed for the 2020 Kia Stinger, from PRESTONE, PEAK, BECK/ARNLEY and 3 other brands. FVP MV5050GAL carries the "Popular" badge. All of them fit every engine offered in the 2020 Stinger.

The Compatible With All Colors section lists 1 option from PRESTONE — grouped under the catalog's "Compatible With All Colors" designation — the notes column spells out what sets them apart. PRESTONE AF3055 is listed in this group.

In the Economy grade, FVP, PEAK and PRESTONE supply 3 parts: the catalog's value-priced group. A representative part number is FVP MV5050GAL.

The Premium section lists 5 options from PRESTONE and PEAK — a step above OE specification in materials, tolerances or warranty terms. PRESTONE AF2100 is listed in this group.

The Standard Replacement section lists 5 options from BECK/ARNLEY, VALVOLINE, AISIN and 1 other brand — built to original-equipment specification. VALVOLINE 861398 is listed in this group.

This table covers the seals at the Coolant Hose / Pipe. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Coolant Hose / Pipe Seal parts for the 2020 Kia Stinger come from 3 brands — APEX, FEL-PRO and HYUNDAI.

Listed part numbers: APEX AWO2297, FEL-PRO 35959 and HYUNDAI 2546235504.

This table covers the gaskets that seal the Coolant Pipe. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Coolant Pipe Gasket parts for the 2020 Kia Stinger come from 2 brands — FEL-PRO and MAHLE / CLEVITE.

Listed part numbers: FEL-PRO 36178, FEL-PRO 36227 and MAHLE / CLEVITE C33905, plus the other parts above.

This table covers the Coolant Water Crossover Mounting sets. Read more

One part is listed for the 2020 Kia Stinger — FEL-PRO ES72971.

This table covers the adapters used to pressure-test this cooling system. Read more

2 Cooling System Tester Adapter parts are listed for the 2020 Kia Stinger, from GATES and MOTORAD. 1 part fits every engine; the other 1 is engine-specific.

Listed part numbers: GATES 31428 and MOTORAD 3121.

This table covers the radiators that dump engine heat to airflow through the core. Typical signs include overheating in traffic, a wet core, or coolant that disappears with no puddle. Replace the cap if it cannot hold the rated pressure, and bleed the system after the swap. Read more

6 Radiator parts are listed for the 2020 Kia Stinger, from TECHPRO, UAC, HYUNDAI and 1 other brand.

Economy: 2 parts, from TECHPRO. A representative part number is TECHPRO KI3010172.

The Standard Replacement section: 4 options from UAC, HYUNDAI and NISSENS. HYUNDAI 25310J5020 is listed in this group.

Part numbers include TECHPRO KI3010172, TECHPRO KI3010171 and HYUNDAI 25310J5020, among others listed above.

This table covers the caps that hold system pressure at the radiator or reservoir neck. Typical signs include a leak at the neck, a cap that will not hold pressure, or a missing tether. Match the pressure rating or thread in the notes — radiator, reservoir and fuel caps are not interchangeable. Read more

7 Radiator Cap parts are listed for the 2020 Kia Stinger, from MOTORAD, GATES, CALORSTAT and 1 other brand. GATES 31534 carries the "Popular" badge. 3 parts fit every engine; the other 4 are engine-specific.

The Locking Replacement section lists 2 options from GATES and MOTORAD — grouped under the catalog's "Locking Replacement" designation — the notes column spells out what sets them apart. GATES 31534 is listed in this group.

The Standard Replacement section: 5 options from MOTORAD, CALORSTAT, DORMAN and 1 other brand. MOTORAD T16R is listed in this group.

This group includes GATES 31534, MOTORAD ST16R and MOTORAD T16R and the remaining parts above.

This table covers the fan assemblies (and clutches, where listed) that pull air through the radiator. Read more

2 Radiator Fan Assembly parts for the 2020 Kia Stinger come from 2 brands — TECHPRO and FOUR SEASONS.

The Economy section: 1 option from TECHPRO. TECHPRO HY3115171 is listed in this group.

Standard Replacement: 1 part, from FOUR SEASONS. A representative part number is FOUR SEASONS 75341.

This group includes TECHPRO HY3115171 and FOUR SEASONS 75341.

This table covers the senders that report coolant temperature to the gauge or ECU. Typical signs include a gauge that sits on empty or overheat, or a lamp that does not match what the engine is doing. Rule out the cluster and the wiring before replacing the sender. Read more

10 Temperature Sender / Sensor parts are listed for the 2020 Kia Stinger, from STANDARD MOTOR PRODUCTS, GPD, HOLSTEIN and 6 other brands. STANDARD MOTOR PRODUCTS TX122T carries the "Popular" badge. All of them fit every engine offered in the 2020 Stinger.

Economy: 4 parts, from STANDARD MOTOR PRODUCTS, GPD, HOLSTEIN and 1 other brand. A representative part number is STANDARD MOTOR PRODUCTS TX122T.

The Standard Replacement section: 6 options from STANDARD MOTOR PRODUCTS, DELPHI, HELLA and 3 other brands. STANDARD MOTOR PRODUCTS TX122 is listed in this group.

This table covers the thermostats that open the coolant circuit at the specified temperature. Typical signs include slow warm-up, a gauge that climbs in traffic, or heat that never quite arrives. Replace the housing gasket with the thermostat and bleed the system so a trapped air pocket does not cook the new part. Read more

4 Thermostat parts for the 2020 Kia Stinger come from 2 brands — MOTORAD and HYUNDAI.

Listed part numbers: HYUNDAI 256003L260, MOTORAD 1269203 and MOTORAD 1319212, plus the other parts above.

This table covers the seals at the thermostat housing and water outlet. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

18 Thermostat / Thermostat Housing / Water Outlet Seal parts are listed for the 2020 Kia Stinger, from FEL-PRO, APEX and MAHLE / CLEVITE. FEL-PRO 35921 carries the "Popular" badge.

This table covers the housings and outlets the thermostat sits in. Read more

This group shows a single part: MOTORAD CH3199.

This table covers the gaskets that seal the Water Inlet. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Water Inlet Gasket parts are listed for the 2020 Kia Stinger, from APEX and FEL-PRO.

Listed part numbers: APEX AWO2093 and FEL-PRO 35368.

This table covers the pumps that circulate coolant through the block and radiator. Typical signs include coolant at the weep hole, pulley play, or a growl from the front of the engine. Replace the thermostat and refill with the specified coolant whenever the pump comes off. Read more

4 Water Pump parts for the 2020 Kia Stinger come from 2 brands — FVP and GMB.

This group includes FVP 1462170AH and FVP 1463000 and the remaining parts above.

This table covers the gaskets between the water pump and the block or housing. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

9 Water Pump Gasket parts are listed for the 2020 Kia Stinger, from FEL-PRO, APEX, MAHLE / CLEVITE and 1 other brand. FEL-PRO 35896 carries the "Popular" badge.

This group includes FEL-PRO 35896, FEL-PRO 35935 and APEX AWP3226 and the remaining parts above.