2018 Kia Stinger Cooling System Parts

This table covers the engine coolants and antifreeze formulations specified for this cooling system. Typical signs include a rising temperature gauge, rusty or sludged coolant, or a heater that blows cold. Use the chemistry named in the notes. Mixing silicate, OAT and HOAT formulas can gel in the radiator. Read more

14 Coolant / Antifreeze parts for the 2018 Kia Stinger come from 6 brands — PRESTONE, PEAK, BECK/ARNLEY and 3 other brands. The "Popular" part is FVP MV5050GAL. Every part fits both the 2.0L L4 Turbocharged and the 3.3L V6 Turbocharged.

In the Compatible With All Colors grade, PRESTONE supplies 1 part: grouped under the catalog's "Compatible With All Colors" designation — the notes column spells out what sets them apart. A representative part number is PRESTONE AF3055.

The Economy section lists 3 options from FVP, PEAK and PRESTONE — the catalog's value-priced group. FVP MV5050GAL is listed in this group.

In the Premium grade, PRESTONE and PEAK supply 5 parts: a step above OE specification in materials, tolerances or warranty terms. A representative part number is PRESTONE AF2100.

In the Standard Replacement grade, BECK/ARNLEY, VALVOLINE, AISIN and 1 other brand supply 5 parts: built to original-equipment specification. A representative part number is VALVOLINE 861398.

This table covers the seals at the Coolant Hose / Pipe. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Coolant Hose / Pipe Seal parts are listed for the 2018 Kia Stinger, from APEX, FEL-PRO and HYUNDAI.

This group includes APEX AWO2297, FEL-PRO 35959 and HYUNDAI 2546235504.

This table covers the gaskets that seal the Coolant Pipe. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Coolant Pipe Gasket parts are listed for the 2018 Kia Stinger, from FEL-PRO and MAHLE / CLEVITE.

Part numbers include FEL-PRO 36178, FEL-PRO 36227 and MAHLE / CLEVITE C33905, among others listed above.

This table covers the Coolant Water Crossover Mounting sets. Read more

This group shows a single part: FEL-PRO ES72971.

This table covers the adapters used to pressure-test this cooling system. Read more

2 Cooling System Tester Adapter parts for the 2018 Kia Stinger come from 2 brands — GATES and MOTORAD. 1 part fits every engine; the other 1 is engine-specific.

Part numbers include GATES 31428 and MOTORAD 3121.

This table covers the radiators that dump engine heat to airflow through the core. Typical signs include overheating in traffic, a wet core, or coolant that disappears with no puddle. Replace the cap if it cannot hold the rated pressure, and bleed the system after the swap. Read more

5 Radiator parts for the 2018 Kia Stinger come from 4 brands — TECHPRO, HYUNDAI, NISSENS and 1 other brand.

The Economy section: 2 options from TECHPRO. TECHPRO KI3010172 is listed in this group.

Standard Replacement: 3 parts, from HYUNDAI, NISSENS and UAC. A representative part number is HYUNDAI 25310J5020.

This group includes TECHPRO KI3010172, TECHPRO KI3010171 and HYUNDAI 25310J5020 and the remaining parts above.

This table covers the caps that hold system pressure at the radiator or reservoir neck. Typical signs include a leak at the neck, a cap that will not hold pressure, or a missing tether. Match the pressure rating or thread in the notes — radiator, reservoir and fuel caps are not interchangeable. Read more

8 Radiator Cap parts for the 2018 Kia Stinger come from 5 brands — MOTORAD, GATES, CALORSTAT and 2 other brands. The "Popular" part is MOTORAD T16R. 5 parts fit every engine; the other 3 are engine-specific.

In the Locking Replacement grade, CALORSTAT, GATES and MOTORAD supply 3 parts: grouped under the catalog's "Locking Replacement" designation — the notes column spells out what sets them apart. A representative part number is CALORSTAT RC0212.

Standard Replacement: 5 parts, from MOTORAD, SKP, DORMAN and 1 other brand. A representative part number is MOTORAD T16R.

This group includes MOTORAD T16R, CALORSTAT RC0212 and GATES 31534 and the remaining parts above.

This table covers the fan assemblies (and clutches, where listed) that pull air through the radiator. Read more

2 Radiator Fan Assembly parts are listed for the 2018 Kia Stinger, from TECHPRO and FOUR SEASONS.

Economy: 1 part, from TECHPRO. A representative part number is TECHPRO HY3115171.

The Standard Replacement section: 1 option from FOUR SEASONS. FOUR SEASONS 75341 is listed in this group.

Part numbers include TECHPRO HY3115171 and FOUR SEASONS 75341.

This table covers the senders that report coolant temperature to the gauge or ECU. Typical signs include a gauge that sits on empty or overheat, or a lamp that does not match what the engine is doing. Rule out the cluster and the wiring before replacing the sender. Read more

11 Temperature Sender / Sensor parts for the 2018 Kia Stinger come from 10 brands — STANDARD MOTOR PRODUCTS, HOLSTEIN, GPD and 7 other brands. The "Popular" part is HOLSTEIN 2CTS0091. 10 parts fit every engine; the other 1 is engine-specific.

The Economy section: 4 options from HOLSTEIN, STANDARD MOTOR PRODUCTS, GPD and 1 other brand. HOLSTEIN 2CTS0091 is listed in this group.

Standard Replacement: 7 parts, from STANDARD MOTOR PRODUCTS, BECK/ARNLEY, DELPHI and 4 other brands. A representative part number is STANDARD MOTOR PRODUCTS TX122.

This table covers the thermostats that open the coolant circuit at the specified temperature. Typical signs include slow warm-up, a gauge that climbs in traffic, or heat that never quite arrives. Replace the housing gasket with the thermostat and bleed the system so a trapped air pocket does not cook the new part. Read more

4 Thermostat parts are listed for the 2018 Kia Stinger, from MOTORAD and HYUNDAI.

Part numbers include HYUNDAI 256003L260, MOTORAD 1269203 and MOTORAD 1319212, among others listed above.

This table covers the seals at the thermostat housing and water outlet. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

18 Thermostat / Thermostat Housing / Water Outlet Seal parts for the 2018 Kia Stinger come from 3 brands — FEL-PRO, APEX and MAHLE / CLEVITE. The "Popular" part is FEL-PRO 35921.

This table covers the housings and outlets the thermostat sits in. Read more

One part is listed for the 2018 Kia Stinger — MOTORAD CH3199.

This table covers the gaskets that seal the Water Inlet. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Water Inlet Gasket parts for the 2018 Kia Stinger come from 2 brands — APEX and FEL-PRO.

Listed part numbers: APEX AWO2093 and FEL-PRO 35368.

This table covers the pumps that circulate coolant through the block and radiator. Typical signs include coolant at the weep hole, pulley play, or a growl from the front of the engine. Replace the thermostat and refill with the specified coolant whenever the pump comes off. Read more

4 Water Pump parts are listed for the 2018 Kia Stinger, from FVP and GMB.

Part numbers include FVP 1462170AH and FVP 1463000, among others listed above.

This table covers the gaskets between the water pump and the block or housing. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

10 Water Pump Gasket parts for the 2018 Kia Stinger come from 4 brands — FEL-PRO, MAHLE / CLEVITE, APEX and 1 other brand. The "Popular" part is FEL-PRO 35896.