The 2020 Kia Telluride has 22 electrical parts with verified fitment on this page — 5 part types and 15 brands, covering the 3.8L V6 engine. Each part includes a manufacturer part number and application notes.
The electrical system on the 2020 Kia Telluride covers charging, starting and the sensors and modules the vehicle relies on, from alternator and starter to oxygen sensors. The largest groups are Battery (9 parts), Alternator / Generator (5 parts) and Parking Aid Sensor (3 parts). The other 2 part types cover the remaining 5 parts.
Every part on this page is matched to the 3.8L V6 — the only engine offered in the 2020 Kia Telluride.
The most listed brands for 2020 Kia Telluride electrical parts are STANDARD MOTOR PRODUCTS (5 parts), FVP (3 parts) and ACDELCO (2 parts), plus 12 more brands. Quality grades include AGM, New and Remanufactured.
2 parts on this 2020 Kia Telluride page carry a "Popular" badge — the source catalog's flag for options frequently chosen for this vehicle — including DEKA 9A94R (Battery) and FVP P94RAGM (Battery). Click any part number to see every vehicle that part fits.
Alternator / Generator
New
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| HL MANDO | 11A1686 | 🇺🇸 US 🇨🇦 CA | New | View on Amazon |
| TYC | 221865 | 🇺🇸 US 🇨🇦 CA | 180 Amps | View on Amazon |
| WAI GLOBAL | 21865N | 🇺🇸 US 🇨🇦 CA | 180 Amps | View on Amazon |
Remanufactured
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FVP | 11122 | 🇺🇸 US 🇨🇦 CA | Remanufactured | View on Amazon |
| PURE ENERGY | 11122 | 🇺🇸 US 🇨🇦 CA | Remanufactured | View on Amazon |
This table covers the alternators that charge the battery and run the electrical load. Typical signs include dim lights at idle, a battery lamp, or a growl from the charging pulley. Load-test the battery and inspect the belt and grounds — a bad ground mimics a failed alternator.
5 Alternator / Generator parts are listed for the 2020 Kia Telluride, from HL MANDO, TYC, WAI GLOBAL and 2 other brands.
In the New grade, HL MANDO, TYC and WAI GLOBAL supply 3 parts: brand-new units rather than rebuilt ones. A representative part number is HL MANDO 11A1686.
In the Remanufactured grade, FVP and PURE ENERGY supply 2 parts: factory-rebuilt units with new wear components. A representative part number is FVP 11122.
This group includes HL MANDO 11A1686, TYC 221865 and WAI GLOBAL 21865N and the remaining parts above.
Battery
AGM (Extended Life)
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DEKA Popular | 9A94R | 🇺🇸 US 🇨🇦 CA | IntimidatorAGM | View on Amazon |
| FVP Popular | P94RAGM | 🇺🇸 US 🇨🇦 CA | Platinum AGMBCI Group: 94R | View on Amazon |
| ACDELCO | 94RAGMHR | 🇺🇸 US 🇨🇦 CA | High ReserveAGM | View on Amazon |
| ACDELCO | 94RAGM | 🇺🇸 US 🇨🇦 CA | AGMBCI Group: 94R | View on Amazon |
| BOSCH | S6587B | 🇺🇸 US 🇨🇦 CA | AGMAGM | View on Amazon |
| EXIDE | MXH7L494R | 🇺🇸 US 🇨🇦 CA | Marathon MaxBCI Group 94R (H7) | View on Amazon |
| LUCAS | LBAGM006A | 🇺🇸 US 🇨🇦 CA | BCI Group: 49AGM | View on Amazon |
| P1MAX | PMAGMH794R | 🇺🇸 US 🇨🇦 CA | BCI Group 94R AGM800 CCA | View on Amazon |
Performance AGM (Extended Life + Increased Power)
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FULLRIVER | FT85094R | 🇺🇸 US 🇨🇦 CA | BCI Group 94R(Length X Width X Height) 12.36 In x 6.85 In x 7.48 In | View on Amazon |
This table covers the batteries listed by group size and specification. Typical signs include slow cranking, a battery lamp, or a no-start after the vehicle sat overnight. Confirm group size and terminal layout in the notes. Clean the posts and the ground before condemning the battery.
9 Battery parts for the 2020 Kia Telluride come from 8 brands — ACDELCO, DEKA, FVP and 5 other brands. The "Popular" part is DEKA 9A94R.
In the AGM (Extended Life) grade, ACDELCO, DEKA, FVP and 4 other brands supply 8 parts: grouped under the catalog's "AGM (Extended Life)" designation — the notes column spells out what sets them apart. A representative part number is DEKA 9A94R.
In the Performance AGM (Extended Life + Increased Power) grade, FULLRIVER supplies 1 part: grouped under the catalog's "Performance AGM (Extended Life + Increased Power)" designation — the notes column spells out what sets them apart. A representative part number is FULLRIVER FT85094R.
This group includes DEKA 9A94R, FVP P94RAGM and ACDELCO 94RAGMHR and the remaining parts above.
Parking Aid Sensor
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS | PPS261 | 🇺🇸 US 🇨🇦 CA | Frontwith Matte Black Finish | View on Amazon |
| STANDARD MOTOR PRODUCTS | PPS284 | 🇺🇸 US 🇨🇦 CA | Rear | View on Amazon |
| STANDARD MOTOR PRODUCTS | PPS260 | 🇺🇸 US 🇨🇦 CA | Frontwith Gloss Black Finish | View on Amazon |
This table covers the ultrasonic park-aid sensors in the bumper. Typical signs include a warning lamp, a stored code, or a reading that drops out when the harness is wiggled. Inspect the connector and ground before replacing the sensor — wiring faults are often condemned as bad sensors.
STANDARD MOTOR PRODUCTS supplies the 3 Parking Aid Sensor parts for the 2020 Kia Telluride.
This group includes STANDARD MOTOR PRODUCTS PPS261, STANDARD MOTOR PRODUCTS PPS284 and STANDARD MOTOR PRODUCTS PPS260.
Speed Sensor
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS | SC814 | 🇺🇸 US | FWDVehicle Speed | View on Amazon |
| STANDARD MOTOR PRODUCTS | SC823 | 🇺🇸 US 🇨🇦 CA | AWDVehicle Speed | View on Amazon |
This table covers the speed sensors on the transmission, transfer case or ABS ring. Typical signs include a dead speedometer, harsh transmission shifts, or a code for vehicle speed. Inspect the tone wheel and the connector before replacing the sensor.
2 Speed Sensor parts for the 2020 Kia Telluride come from STANDARD MOTOR PRODUCTS.
Part numbers include STANDARD MOTOR PRODUCTS SC814 and STANDARD MOTOR PRODUCTS SC823.
Starter Motor
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FVP | 12847 | 🇺🇸 US 🇨🇦 CA | Remanufactured | View on Amazon |
| REMY | 16464 | 🇺🇸 US 🇨🇦 CA | Remanufactured | View on Amazon |
| TERREPOWER | 50025 | 🇺🇸 US 🇨🇦 CA | Remanufactured | View on Amazon |
This table covers the starter motors that crank the engine. Typical signs include no motion, a squeal, or a motor that only runs on one speed. Confirm power, ground and the control module before replacing the motor.
3 Starter Motor parts are listed for the 2020 Kia Telluride, from FVP, REMY and TERREPOWER.
Listed part numbers: FVP 12847, REMY 16464 and TERREPOWER 50025.
Buying Electrical Parts for a 2020 Kia Telluride
On this vehicle, the electrical system covers charging, starting and the sensors and modules the vehicle relies on, from alternator and starter to oxygen sensors.
- Confirm you have the 3.8L V6 engine — every part on this page is matched to it.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, clean or renew the battery terminals and grounds with any charging-system repair.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Battery and Alternator / Generator .
Frequently Asked Questions
How many electrical parts fit the 2020 Kia Telluride?
Our catalog currently lists 22 electrical parts for the 2020 Kia Telluride across 5 subcategories and 15 brands, covering the 3.8L V6 engine. Each part is matched to the engine(s) it fits.
What are the signs of electrical problems on a 2020 Kia Telluride?
Common symptoms include slow cranking on cold mornings, a battery light that flickers, dim lights at idle, or a check-engine code pointing at a sensor circuit. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, clean or renew the battery terminals and grounds with any charging-system repair.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2020 Kia Telluride was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 2020 Kia Telluride?
Every part on this page is matched to the 3.8L V6 engine. Then test before replacing — a failed alternator and a bad ground can look identical, and sensors are frequently condemned for wiring faults. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 2020 Kia Telluride
Electrical Parts for Other Kia Telluride Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.