2020 Kia Telluride Engine Parts

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

2 Connecting Rod Bearing parts for the 2020 Kia Telluride come from 2 brands — ENGINETECH and TOPLINE.

This group includes ENGINETECH BB1004 and TOPLINE RBHY14L.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

2 Conversion / Lower Gasket Set parts for the 2020 Kia Telluride come from 2 brands — AJUSA and MAHLE / CLEVITE.

Listed part numbers: AJUSA 54307900 and MAHLE / CLEVITE CS55452.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

TOPLINE supplies both parts for the 2020 Kia Telluride.

Listed part numbers: TOPLINE TWHY14 and TOPLINE MBHY14L.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

5 Crankshaft Seal parts are listed for the 2020 Kia Telluride, from MAHLE / CLEVITE, AJUSA and SKF. MAHLE / CLEVITE 67874 carries the "Popular" badge.

Part numbers include MAHLE / CLEVITE 67874, AJUSA 15048600 and AJUSA 15096600, among others listed above.

This table covers the bolts that clamp the cylinder head to the block. Read more

This group shows a single part: AJUSA 81082200.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

6 Cylinder Head Gasket parts for the 2020 Kia Telluride come from 2 brands — AJUSA and ELRING. The "Popular" part is ELRING 204920.

Listed part numbers: ELRING 204920, AJUSA 10261800 and AJUSA 10261900, plus the other parts above.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

2 Cylinder Head Gasket Set parts for the 2020 Kia Telluride come from 2 brands — AJUSA and MAHLE / CLEVITE.

This group includes AJUSA 52605400 and MAHLE / CLEVITE HS55452.

This table covers the Engine covers. Read more

2 Engine Cover parts for the 2020 Kia Telluride come from 2 brands — TECHPRO and VARIOUS MFR.

Part numbers include TECHPRO KI1228176, among others listed above.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

This group shows a single part: AJUSA 50548500.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

4 Exhaust Valve parts are listed for the 2020 Kia Telluride, from MELLING, QUALCAST, SBI and 1 other brand.

This group includes MELLING V3287, QUALCAST 1013287 and SBI 13287 and the remaining parts above.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

5 Harmonic Balancer parts for the 2020 Kia Telluride come from 5 brands — HL MANDO, ATP, DAYCO and 2 other brands. The "Popular" part is HL MANDO 30A5015.

This group includes HL MANDO 30A5015, ATP 102222 and DAYCO PB1528N and the remaining parts above.

This table covers the Intake manifolds. Typical signs include an exhaust tick, a vacuum leak, or a gasket that has burned through. Replace the gaskets and hardware; a warped flange will leak with a new gasket alone. Read more

4 Intake Manifold parts are listed for the 2020 Kia Telluride, from ACKOJA and HYUNDAI.

Listed part numbers: ACKOJA A520165, ACKOJA A520160 and HYUNDAI 283103CFA0, plus the other parts above.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Intake Manifold Gasket parts for the 2020 Kia Telluride come from 3 brands — MAHLE / CLEVITE, FEL-PRO and AJUSA. The "Popular" part is MAHLE / CLEVITE MS20317.

Part numbers include MAHLE / CLEVITE MS20317, AJUSA 13273700 and FEL-PRO MS98024, among others listed above.

This table covers the gaskets that seal the Intake Plenum. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 2020 Kia Telluride — AJUSA 01503900.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

3 Intake Valve parts are listed for the 2020 Kia Telluride, from MELLING, SBI and TOPLINE.

Part numbers include MELLING V3286, SBI 13286 and TOPLINE IVHY14.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

4 Motor Mount parts are listed for the 2020 Kia Telluride, from ANCHOR, DEA / MARMON RIDE CONTROL, PIONEER and 1 other brand.

Part numbers include ANCHOR 10249, DEA / MARMON RIDE CONTROL A71108 and PIONEER 610249, among others listed above.

This table covers the Motor Mount kits. Read more

ANCHOR supplies both parts for the 2020 Kia Telluride.

Listed part numbers: ANCHOR 300920 and ANCHOR 300921.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

68 Oil parts are listed for the 2020 Kia Telluride, from VALVOLINE, LIQUI MOLY, MOBIL and 4 other brands. MOBIL 125195 carries the "Popular" badge. They are grouped as Conventional, Full Synthetic, High Mileage (>75,000 Miles), Racing and Synthetic Blend, with Full Synthetic the largest group at 42 parts from LIQUI MOLY, VALVOLINE, MOBIL and 2 other brands.

This table covers the drain plugs in the oil pan. Read more

6 Oil Drain Plug parts are listed for the 2020 Kia Telluride, from DORMAN, AGS, REIN and 1 other brand. DORMAN 090033 carries the "Popular" badge.

Part numbers include DORMAN 090033, DORMAN 090053 and AGS ODP00007, among others listed above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Oil Drain Plug Gasket parts for the 2020 Kia Telluride come from 4 brands — DORMAN, AJUSA, FEL-PRO and 1 other brand. The "Popular" part is DORMAN 095147.

This group includes DORMAN 095147, AJUSA 22007100 and DORMAN 995147CD and the remaining parts above.

This table covers the caps on the oil filler neck. Read more

4 Oil Filler Cap parts are listed for the 2020 Kia Telluride, from CALORSTAT, GATES, MOTORAD and 1 other brand.

Listed part numbers: CALORSTAT OC2331, GATES 31083 and MOTORAD MO151, plus the other parts above.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

11 Oil Filter parts are listed for the 2020 Kia Telluride, from WIX, PRO-TEC, CHAMP / LUBER-FINER and 7 other brands. PRO-TEC PXL10033 carries the "Popular" badge.

In the Economy grade, PRO-TEC, CHAMP / LUBER-FINER, FVP and 1 other brand supply 4 parts: the catalog's value-priced group. A representative part number is PRO-TEC PXL10033.

In the High Performance / Heavy Duty grade, WIX and MOBIL supply 2 parts: grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. A representative part number is WIX WL10033XP.

The Standard Replacement section lists 5 options from WIX, BECK/ARNLEY, HASTINGS / BALDWIN and 2 other brands — built to original-equipment specification. WIX WL10033 is listed in this group.

This table covers the Oil Filter adapters. Read more

This group shows a single part: DORMAN 926611.

This table covers the Oil Filter Adapter Gasket O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove. Read more

This group shows a single part: MAHLE / CLEVITE B33331.

This table covers the Oil Filter covers. Read more

3 Oil Filter Cover parts for the 2020 Kia Telluride come from 3 brands — AUTOTECNICA, DORMAN and MOTORAD.

This group includes AUTOTECNICA KI1422870, DORMAN 917492 and MOTORAD MO365.

This table covers the Oil Filter housings. Read more

3 Oil Filter Housing parts for the 2020 Kia Telluride come from 2 brands — AUTOTECNICA and SKP.

Listed part numbers: AUTOTECNICA KI1422800PRM, AUTOTECNICA KI1422800 and SKP SK117263AL.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 2020 Kia Telluride — VICTOR REINZ 703141410.

This table covers the chains that drive the oil pump. Read more

3 Oil Pump Chain parts for the 2020 Kia Telluride come from 3 brands — CLOYES, MELLING and S.A. GEAR.

Listed part numbers: CLOYES C557, MELLING 1103 and S.A. GEAR C1239.

This table covers the Oil Pump Chain tensioners. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

3 Oil Pump Chain Tensioner parts are listed for the 2020 Kia Telluride, from CLOYES, MELLING and S.A. GEAR.

Listed part numbers: CLOYES 96259, MELLING BT7081 and S.A. GEAR 91421.

This table covers the Oil Pump sprockets. Read more

This group shows a single part: MELLING S1327.

This table covers the timing chains that keep the cams in time with the crank. Read more

3 Timing Chain parts for the 2020 Kia Telluride come from 3 brands — CLOYES, MELLING and S.A. GEAR.

Part numbers include CLOYES C555, MELLING 1098 and S.A. GEAR C1197.

This table covers kits that group a timing chain with the related tensioners and guides. Read more

4 Timing Chain & Component Kit parts are listed for the 2020 Kia Telluride, from MELLING, S.A. GEAR and CLOYES.

Economy: 1 part, from S.A. GEAR. A representative part number is S.A. GEAR 76461S.

The Standard Replacement section: 3 options from MELLING and CLOYES. CLOYES 90555SFX is listed in this group.

This group includes S.A. GEAR 76461S, CLOYES 90555SFX and MELLING 31098SX and the remaining parts above.

This table covers the guides and dampers that keep the timing chain on its path. Read more

9 Timing Chain Guide / Damper parts for the 2020 Kia Telluride come from 4 brands — S.A. GEAR, CLOYES, HYUNDAI and 1 other brand. The "Popular" part is S.A. GEAR 71283.

Part numbers include S.A. GEAR 71283, S.A. GEAR 71282 and CLOYES 96253, among others listed above.

This table covers the tensioners that keep the timing chain taut. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

6 Timing Chain Tensioner parts are listed for the 2020 Kia Telluride, from HYUNDAI, S.A. GEAR, CLOYES and 3 other brands. HYUNDAI 244103CGA3 carries the "Popular" badge.

Listed part numbers: HYUNDAI 244103CGA3, S.A. GEAR 91378 and CLOYES 96252, plus the other parts above.

This table covers the gaskets that seal the Timing Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 2020 Kia Telluride — MAHLE / CLEVITE JV5274.

This table covers the crankshaft sprockets that drive the timing chain or belt. Read more

4 Timing Crank Sprocket parts are listed for the 2020 Kia Telluride, from MELLING and HYUNDAI.

Part numbers include HYUNDAI 231213L100, MELLING S1328 and MELLING S1329, among others listed above.

This table covers the Torque Strut mounts. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

4 Torque Strut Mount parts for the 2020 Kia Telluride come from 4 brands — ANCHOR, DEA / MARMON RIDE CONTROL, PIONEER and 1 other brand.

This group includes ANCHOR 10024, DEA / MARMON RIDE CONTROL A71094 and PIONEER 630024 and the remaining parts above.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Valve Cover Gasket parts are listed for the 2020 Kia Telluride, from AJUSA, BECK/ARNLEY and MAHLE / CLEVITE. MAHLE / CLEVITE VS50879 carries the "Popular" badge.

Part numbers include MAHLE / CLEVITE VS50879, AJUSA 11156100 and AJUSA 11156200, among others listed above.

This table covers the pressed-in bronze and cast-iron guides that align valve stems. Typical signs include oil smoke on startup, a guide that has gone oval, or a valve that no longer seats quietly. Guides are a machine-shop fit. Confirm stem diameter in the notes before ordering. Read more

3 Valve Guide parts are listed for the 2020 Kia Telluride, from QUALCAST, SBI and TOPLINE.

Listed part numbers: QUALCAST 303152, SBI 1403152 and TOPLINE VGHY14.

This table covers the lifters / tappets that transfer cam motion to the valves. Read more

HYUNDAI supplies both parts for the 2020 Kia Telluride.

This group includes HYUNDAI 222263CCA0 and HYUNDAI 222263CCC0.

This table covers the Valve seats. Read more

3 Valve Seat parts for the 2020 Kia Telluride come from 2 brands — SBI and QUALCAST.

Part numbers include QUALCAST 21150056, SBI SB131259 and SBI SB150056.

This table covers the keepers that lock each valve-spring retainer to the stem. Read more

4 Valve Spring Retainer Keeper parts for the 2020 Kia Telluride come from 4 brands — HYUNDAI, MELLING, QUALCAST and 1 other brand.

Listed part numbers: HYUNDAI 2222302500, MELLING VL1060 and QUALCAST 345008, plus the other parts above.

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

8 Valve Stem Seal parts are listed for the 2020 Kia Telluride, from AJUSA, FEL-PRO, APEX and 4 other brands. AJUSA 12025500 carries the "Popular" badge.

This group includes AJUSA 12025500, FEL-PRO SS72298 and AJUSA 57062800 and the remaining parts above.

This table covers the oil-control solenoids that command the cam phasers. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same. Read more

19 Variable Valve Timing (VVT) Solenoid / Actuator parts are listed for the 2020 Kia Telluride, from GATES, HYUNDAI, STANDARD MOTOR PRODUCTS and 6 other brands. DORMAN 918032 carries the "Popular" badge.

Economy: 8 parts, from GATES, DORMAN, HOLSTEIN and 1 other brand. A representative part number is DORMAN 918032.

The Standard Replacement section: 11 options from HYUNDAI, STANDARD MOTOR PRODUCTS, ACKOJA and 2 other brands. HYUNDAI 243783L100 is listed in this group.

This table covers the cam phaser sprockets used by the variable-valve-timing system. Read more

7 Variable Valve Timing (VVT) Sprocket parts are listed for the 2020 Kia Telluride, from HYUNDAI, SKP, AUTOTECNICA and 3 other brands. SKP SK998015 carries the "Popular" badge.

Economy: 2 parts, from SKP and AUTOTECNICA. A representative part number is SKP SK998015.

The Standard Replacement section: 5 options from HYUNDAI, STANDARD MOTOR PRODUCTS, ACKOJA and 1 other brand. STANDARD MOTOR PRODUCTS VVT709 is listed in this group.

Listed part numbers: SKP SK998015, AUTOTECNICA HY1421805 and STANDARD MOTOR PRODUCTS VVT709, plus the other parts above.