1981 Lamborghini Countach Ignition Parts

Engine:
3.9L V12

14 Ignition parts are listed for the 1981 Lamborghini Countach, in 3 part types, covering the 3.9L V12 engine. Each one has a brand, a manufacturer part number and notes that say where it fits.

On the 1981 Lamborghini Countach, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules. All 14 listed parts are Spark Plug (11 parts), Ignition Coil (2 parts) and Ignition Conversion Kit (1 part).

Ignition Coil

Brand Part Number Markets Notes Buy
ACDELCO U505
🇺🇸 US 🇨🇦 CA
Professional
View on
Amazon
WELLS 5C1026
🇺🇸 US
Requires External Resistor: YES
View on
Amazon

This table covers the coils that fire each spark plug. Typical signs include a misfire that follows one cylinder, a snap in damp weather, or a coil that is swollen or cracked. Swap a suspect coil with a neighbor to confirm, then replace boots that tore on the way off.

Ignition Conversion Kit

Brand Part Number Markets Notes Buy
WELLS 1A4182
🇺🇸 US
Marelli Distributor # S85B, C, CA, Dual contact Distributor, Counter clockwise rotation, Dual Distributor applications, Kit Contains 1 module for each Distributor, with 3 lobe contact cam12 Volt
Fitment notes — WELLS 1A4182
Marelli Distributor # S85B, C, CA, Dual contact Distributor, Counter clockwise rotation, Dual Distributor applications, Kit Contains 1 module for each Distributor, with 3 lobe contact cam12 VoltNegative Ground
View on
Amazon

This table covers the Ignition Conversion kits.

Spark Plug

Summary: Notes include pre-set gaps of 0.024", 0.025", 0.028", 0.030", 0.032" and 0.035". Replacement brands in this table include CHAMPION, NGK and AUTOLITE.

Copper / Nickel

Brand Part Number Markets Notes Buy
NGK Popular 5534
🇺🇸 US
StandardPre-Set Gap: 0.032"
Fitment notes — NGK 5534
StandardPre-Set Gap: 0.032"
OE-Recommended Gap: 0.025 IN
View on
Amazon
AUTOLITE 4063
🇺🇸 US
Copper ResistorResistance: 5000 OHM
Fitment notes — AUTOLITE 4063
Copper ResistorResistance: 5000 OHMPre-Set Gap: 0.030"
Gap .025 (In) 0.6 (mm)Threaded Terminal with Solid CapOE Style
View on
Amazon
CHAMPION 315
🇺🇸 US
Copper PlusPre-Set Gap: 0.025"
Fitment notes — CHAMPION 315
Copper PlusPre-Set Gap: 0.025"
OE TypeOE-Recommended Gap: 0.024"
View on
Amazon
CHAMPION 332
🇺🇸 US
Copper PlusPre-Set Gap: 0.025"
Fitment notes — CHAMPION 332
Copper PlusPre-Set Gap: 0.025"
Resistor TypeOE-Recommended Gap: 0.024"
View on
Amazon
CHAMPION 3321
🇺🇸 US
Copper Plus
Fitment notes — CHAMPION 3321
Copper Plus
Resistor TypeOE-Recommended Gap: 0.024"
View on
Amazon

Double Platinum (lasts up to 3x longer than Copper / Nickel)

Brand Part Number Markets Notes Buy
CHAMPION Popular 7415
🇺🇸 US
Double Platinum PowerPre-Set Gap: 0.032"
Fitment notes — CHAMPION 7415
Double Platinum PowerPre-Set Gap: 0.032"
OE-Recommended Gap: 0.024"Resistor Plug
View on
Amazon
ACDELCO 41804
🇺🇸 US 🇨🇦 CA
ProfessionalDouble Platinum
Fitment notes — ACDELCO 41804
ProfessionalDouble PlatinumPre-Set Gap: 0.035"
OE-Recommended Gap: 0.024"
View on
Amazon
NGK 3200
🇺🇸 US
Laser PlatinumPre-Set Gap: 0.028"
Fitment notes — NGK 3200
Laser PlatinumPre-Set Gap: 0.028"
OE-Recommended Gap: 0.025 IN
View on
Amazon

Iridium (lasts up to 4x longer than Copper / Nickel)

Brand Part Number Markets Notes Buy
CHAMPION Popular 9804
🇺🇸 US
IridiumPre-Set Gap: 0.03"
Fitment notes — CHAMPION 9804
IridiumPre-Set Gap: 0.03"
OE-Recommended Gap: 0.024"
View on
Amazon
AUTOLITE XS4063
🇺🇸 US
Xtreme Sport Spark PlugManufacturer Heat Range: 14
Fitment notes — AUTOLITE XS4063
Xtreme Sport Spark PlugManufacturer Heat Range: 14Designed for Motorcycles, ATV's, Personal Watercraft (Jet Skis), Boats, and Snowmobiles
Machined Fine WireOriginal Center Electrode Material is Copper/Nickel
View on
Amazon
NGK 4055
🇺🇸 US
Iridium IXPre-Set Gap: 0.032"
Fitment notes — NGK 4055
Iridium IXPre-Set Gap: 0.032"
OE-Recommended Gap: 0.025 IN
View on
Amazon

This table covers the spark plugs for this engine. Typical signs include misfire under load, rough idle, or a flashing check-engine light. Verify the gap even on pre-gapped plugs, and replace coil boots that come off a high-mileage engine.

Buying Ignition Parts for a 1981 Lamborghini Countach

On this vehicle, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules.

  • Confirm you have the 3.9L V12 engine — every part on this page is matched to it.
  • Read the notes on each row for position, trim and spec qualifiers before you order.
  • Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
  • Cross-reference the manufacturer part number against your old part or a service-manual listing.

Start with the largest groups on this page: Spark Plug and Ignition Coil .

Frequently Asked Questions

How many ignition parts fit the 1981 Lamborghini Countach?

Our catalog currently lists 14 ignition parts for the 1981 Lamborghini Countach across 3 subcategories and 5 brands, covering the 3.9L V12 engine. Each part is matched to the engine(s) it fits.

What are the signs of ignition problems on a 1981 Lamborghini Countach?

Common symptoms include misfires under load, rough idle, flashing check-engine light, or poor starting in damp weather. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.

What spark-plug gap is listed for the 1981 Lamborghini Countach?

Notes on this page include pre-set gaps of 0.024", 0.025", 0.028", 0.030", 0.032" and 0.035". Still verify against spec — even “pre-gapped” plugs should be checked before they go in.

What should I replace at the same time?

Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.

What do the market flags (US, CA, MX) on each part mean?

They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1981 Lamborghini Countach was originally sold in the US, the safest choice is a part marked for the US market.

How do I make sure a part fits my 1981 Lamborghini Countach?

Every part on this page is matched to the 3.9L V12 engine. Then gap matters even on “pre-gapped” plugs — verify against spec, and replace coil boots when they come off a high-mileage engine. The notes column carries position and trim qualifiers where they apply.

Other Parts for the 1981 Lamborghini Countach

Ignition Parts for Other Lamborghini Countach Years

Switch vehicle or jump to a subcategory

Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.