1988 Lamborghini Countach Ignition Parts

Engine:
5.2L V12

This page lists 12 ignition parts for the 1988 Lamborghini Countach, across 3 part types, covering the 5.2L V12 engine. Every part shows its brand, manufacturer part number and fitment notes.

On the 1988 Lamborghini Countach, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules. All 12 listed parts are Ignition Coil (7 parts), Spark Plug (4 parts) and Ignition Conversion Kit (1 part).

Ignition Coil

Economy

Brand Part Number Markets Notes Buy
FVP UC12F
🇺🇸 US
View on
Amazon
HOLSTEIN 2IGC0056
🇺🇸 US
View on
Amazon
SKP SKUC12
🇺🇸 US
View on
Amazon
STANDARD MOTOR PRODUCTS UC12T
🇺🇸 US
T-Series
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
ACDELCO Popular U505
🇺🇸 US 🇨🇦 CA
Professional
View on
Amazon
WELLS Popular 5C1026
🇺🇸 US
Requires External Resistor: YES
View on
Amazon
STANDARD MOTOR PRODUCTS UC12
🇺🇸 US
View on
Amazon

This table covers the coils that fire each spark plug. Typical signs include a misfire that follows one cylinder, a snap in damp weather, or a coil that is swollen or cracked. Swap a suspect coil with a neighbor to confirm, then replace boots that tore on the way off.

Ignition Conversion Kit

Brand Part Number Markets Notes Buy
WELLS 1A4182
🇺🇸 US
Marelli Distributor # S85B, C, CA, Dual contact Distributor, Counter clockwise rotation, Dual Distributor applications, Kit Contains 1 module for each Distributor, with 3 lobe contact cam12 Volt
Fitment notes — WELLS 1A4182
Marelli Distributor # S85B, C, CA, Dual contact Distributor, Counter clockwise rotation, Dual Distributor applications, Kit Contains 1 module for each Distributor, with 3 lobe contact cam12 VoltNegative Ground
View on
Amazon

This table covers the Ignition Conversion kits.

Spark Plug

Copper / Nickel

Brand Part Number Markets Notes Buy
AUTOLITE 4132
🇺🇸 US
Copper Non-ResistorPre-Set Gap: 0.028"
Fitment notes — AUTOLITE 4132
Copper Non-ResistorPre-Set Gap: 0.028"
Gap .025 (In) 0.6 (mm)OE Style
View on
Amazon
CHAMPION 905
🇺🇸 US
Copper PlusPre-Set Gap: 0.025"
Fitment notes — CHAMPION 905
Copper PlusPre-Set Gap: 0.025"
OE TypeOE-Recommended Gap: 0.024"
View on
Amazon

Iridium (lasts up to 4x longer than Copper / Nickel)

Brand Part Number Markets Notes Buy
NGK 5545
🇺🇸 US
Iridium IXPre-Set Gap: 0.036"
Fitment notes — NGK 5545
Iridium IXPre-Set Gap: 0.036"
OE-Recommended Gap: 0.036 IN
View on
Amazon

Silver (best conductor of electricity for sport driving / racing)

Brand Part Number Markets Notes Buy
BOSCH 7700
🇺🇸 US
SilverPre-Set Gap: 0.027"
View on
Amazon

This table covers the spark plugs for this engine. Typical signs include misfire under load, rough idle, or a flashing check-engine light. Verify the gap even on pre-gapped plugs, and replace coil boots that come off a high-mileage engine.

Buying Ignition Parts for a 1988 Lamborghini Countach

On this vehicle, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules.

  • Confirm you have the 5.2L V12 engine — every part on this page is matched to it.
  • Read the notes on each row for position, trim and spec qualifiers before you order.
  • Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
  • Cross-reference the manufacturer part number against your old part or a service-manual listing.

Start with the largest groups on this page: Ignition Coil and Spark Plug .

Frequently Asked Questions

How many ignition parts fit the 1988 Lamborghini Countach?

Our catalog currently lists 12 ignition parts for the 1988 Lamborghini Countach across 3 subcategories and 10 brands, covering the 5.2L V12 engine. Each part is matched to the engine(s) it fits.

What are the signs of ignition problems on a 1988 Lamborghini Countach?

Common symptoms include misfires under load, rough idle, flashing check-engine light, or poor starting in damp weather. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.

What spark-plug gap is listed for the 1988 Lamborghini Countach?

Notes on this page include pre-set gaps of 0.024", 0.025", 0.027", 0.028" and 0.036". Still verify against spec — even “pre-gapped” plugs should be checked before they go in.

What should I replace at the same time?

Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.

What do the market flags (US, CA, MX) on each part mean?

They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1988 Lamborghini Countach was originally sold in the US, the safest choice is a part marked for the US market.

How do I make sure a part fits my 1988 Lamborghini Countach?

Every part on this page is matched to the 5.2L V12 engine. Then gap matters even on “pre-gapped” plugs — verify against spec, and replace coil boots when they come off a high-mileage engine. The notes column carries position and trim qualifiers where they apply.

Other Parts for the 1988 Lamborghini Countach

Ignition Parts for Other Lamborghini Countach Years

Switch vehicle or jump to a subcategory

Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.