1977 Lancia Beta Engine Parts

This table covers the wear sleeves used to restore a Auxiliary Shaft seal surface. Read more

2 Auxiliary Shaft Repair Sleeve parts are listed for the 1977 Lancia Beta, from SCHAEFFLER and SKF.

Listed part numbers: SCHAEFFLER SR3463 and SKF 99114.

This table covers the seals at the Auxiliary Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Auxiliary Shaft Seal parts are listed for the 1977 Lancia Beta, from SCHAEFFLER and SKF.

Listed part numbers: SCHAEFFLER SS2287 and SKF 11640.

This table covers the wear sleeves used to restore a Camshaft seal surface. Read more

3 Camshaft Repair Sleeve parts for the 1977 Lancia Beta come from 3 brands — NATIONAL, SCHAEFFLER and WJB / INMOTION PARTS.

Part numbers include NATIONAL 99114, SCHAEFFLER SR3463 and WJB / INMOTION PARTS WS99114.

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Camshaft Seal parts for the 1977 Lancia Beta come from 3 brands — BCA, ITM ENGINE COMPONENTS and NATIONAL.

Part numbers include BCA NS223035, ITM ENGINE COMPONENTS 1506303 and NATIONAL 223035.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

One part is listed for the 1977 Lancia Beta — ITM ENGINE COMPONENTS 4B2825.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

This group shows a single part: ITM ENGINE COMPONENTS 5M2826.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

5 Crankshaft Repair Sleeve parts for the 1977 Lancia Beta come from 4 brands — WJB / INMOTION PARTS, NATIONAL, BCA and 1 other brand. The "Popular" part is NATIONAL 99157.

Listed part numbers: NATIONAL 99157, BCA NS99157 and SCHAEFFLER SR3483, plus the other parts above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

5 Crankshaft Seal parts for the 1977 Lancia Beta come from 3 brands — NATIONAL, WJB / INMOTION PARTS and SCHAEFFLER. The "Popular" part is NATIONAL 224025.

This group includes NATIONAL 224025, NATIONAL 227040 and SCHAEFFLER SS2642 and the remaining parts above.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Cylinder Head Gasket parts are listed for the 1977 Lancia Beta, from MAHLE / CLEVITE and VICTOR REINZ.

Listed part numbers: MAHLE / CLEVITE 3635 and VICTOR REINZ 613180000.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

One part is listed for the 1977 Lancia Beta — VICTOR REINZ 023180001.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

This group shows a single part: ITM ENGINE COMPONENTS RX34400.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Intake Manifold Gasket parts are listed for the 1977 Lancia Beta, from ITM ENGINE COMPONENTS, MAHLE / CLEVITE and VICTOR REINZ.

This group includes ITM ENGINE COMPONENTS 0956300, MAHLE / CLEVITE MS15244 and VICTOR REINZ 713572200.

This table covers the O-rings that seal this joint. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove. Read more

This group shows a single part: VICTOR REINZ 411043100.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

9 Oil Filter parts for the 1977 Lancia Beta come from 7 brands — BOSCH, FAMOUS BRAND, PUROLATOR and 4 other brands. The "Popular" part is BOSCH 72137WS.

The Economy section lists 5 options from FAMOUS BRAND, BOSCH, PUROLATOR and 1 other brand — the catalog's value-priced group. BOSCH 72137WS is listed in this group.

In the Standard Replacement grade, ACDELCO, BECK/ARNLEY, BOSCH and 1 other brand supply 4 parts: built to original-equipment specification. A representative part number is ACDELCO PF53.

Part numbers include BOSCH 72137WS, FAMOUS BRAND 85374 and FAMOUS BRAND 85189, among others listed above.

This table covers the rings that seal each piston to the cylinder wall. Read more

One part is listed for the 1977 Lancia Beta — ITM ENGINE COMPONENTS 0216045.

This table covers the Thrust washers. Read more

This group shows a single part: ITM ENGINE COMPONENTS 1T2826.

This table covers the Timing belts. Typical signs include squeal on cold start, cracked ribs, or glazing. Spin the tensioner and idlers by hand while the belt is off. Read more

4 Timing Belt parts are listed for the 1977 Lancia Beta, from CONTINENTAL, ACDELCO and DAYCO.

Economy: 1 part, from CONTINENTAL. A representative part number is CONTINENTAL CD020.

The Standard Replacement section: 3 options from ACDELCO, CONTINENTAL and DAYCO. ACDELCO TB020 is listed in this group.

Listed part numbers: CONTINENTAL CD020, ACDELCO TB020 and CONTINENTAL 40020, plus the other parts above.

This table covers the wear sleeves used to restore a Timing Cover seal surface. Read more

3 Timing Cover Repair Sleeve parts for the 1977 Lancia Beta come from 2 brands — SCHAEFFLER and SKF.

This group includes SCHAEFFLER SS3480, SCHAEFFLER SR3483 and SKF 99153.

This table covers the seals at the Timing Cover. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Timing Cover Seal parts for the 1977 Lancia Beta come from 3 brands — ITM ENGINE COMPONENTS, SCHAEFFLER and SKF.

This group includes ITM ENGINE COMPONENTS 1506301, SCHAEFFLER SS2642 and SKF 15826.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Valve Cover Gasket parts for the 1977 Lancia Beta come from 4 brands — ITM ENGINE COMPONENTS, FEL-PRO, BECK/ARNLEY and 1 other brand. The "Popular" part is FEL-PRO VS26065C.

This group includes FEL-PRO VS26065C, BECK/ARNLEY 0360263 and ITM ENGINE COMPONENTS 0936306 and the remaining parts above.

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: ITM ENGINE COMPONENTS SS154.