1979 Lancia Beta Engine Parts

This table covers the wear sleeves used to restore a Auxiliary Shaft seal surface. Read more

2 Auxiliary Shaft Repair Sleeve parts are listed for the 1979 Lancia Beta, from SCHAEFFLER and SKF.

This group includes SCHAEFFLER SR3463 and SKF 99114.

This table covers the seals at the Auxiliary Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Auxiliary Shaft Seal parts are listed for the 1979 Lancia Beta, from SCHAEFFLER and SKF.

Listed part numbers: SCHAEFFLER SS2287 and SKF 11640.

This table covers the wear sleeves used to restore a Camshaft seal surface. Read more

3 Camshaft Repair Sleeve parts for the 1979 Lancia Beta come from 3 brands — NATIONAL, SCHAEFFLER and WJB / INMOTION PARTS.

Part numbers include NATIONAL 99114, SCHAEFFLER SR3463 and WJB / INMOTION PARTS WS99114.

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Camshaft Seal parts for the 1979 Lancia Beta come from 4 brands — AJUSA, BCA, ITM ENGINE COMPONENTS and 1 other brand.

Part numbers include AJUSA 15009700, BCA NS223035 and ITM ENGINE COMPONENTS 1506303, among others listed above.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

2 Connecting Rod Bearing parts are listed for the 1979 Lancia Beta, from ITM ENGINE COMPONENTS and MAHLE / CLEVITE.

Part numbers include ITM ENGINE COMPONENTS 4B2825 and MAHLE / CLEVITE CB1138AL.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

One part is listed for the 1979 Lancia Beta — AJUSA 54009700.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

This group shows a single part: ITM ENGINE COMPONENTS 5M2826.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

5 Crankshaft Repair Sleeve parts for the 1979 Lancia Beta come from 4 brands — WJB / INMOTION PARTS, NATIONAL, BCA and 1 other brand. The "Popular" part is NATIONAL 99157.

Part numbers include NATIONAL 99157, BCA NS99157 and SCHAEFFLER SR3483, among others listed above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

6 Crankshaft Seal parts for the 1979 Lancia Beta come from 4 brands — NATIONAL, WJB / INMOTION PARTS, AJUSA and 1 other brand. The "Popular" part is NATIONAL 224025.

Part numbers include NATIONAL 224025, WJB / INMOTION PARTS WS224025 and AJUSA 15033900, among others listed above.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Cylinder Head Gasket parts are listed for the 1979 Lancia Beta, from AJUSA, MAHLE / CLEVITE and VICTOR REINZ.

Part numbers include AJUSA 10004800, MAHLE / CLEVITE 3635 and VICTOR REINZ 613180000.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

3 Cylinder Head Gasket Set parts are listed for the 1979 Lancia Beta, from AJUSA, MAHLE / CLEVITE and VICTOR REINZ.

This group includes AJUSA 52011200, MAHLE / CLEVITE HS3635X and VICTOR REINZ 023180001.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

One part is listed for the 1979 Lancia Beta — AJUSA 50045000.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

This group shows a single part: ITM ENGINE COMPONENTS RX34400.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Intake Manifold Gasket parts are listed for the 1979 Lancia Beta, from AJUSA, MAHLE / CLEVITE and VICTOR REINZ.

Listed part numbers: AJUSA 13026200, MAHLE / CLEVITE MS15244 and VICTOR REINZ 713572200.

This table covers the O-rings that seal this joint. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove. Read more

This group shows a single part: VICTOR REINZ 411043100.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

9 Oil Filter parts for the 1979 Lancia Beta come from 7 brands — VARIOUS MFR, BOSCH, FAMOUS BRAND and 4 other brands. The "Popular" part is VARIOUS MFR PG4670.

The Economy section lists 4 options from VARIOUS MFR, BOSCH, FAMOUS BRAND and 1 other brand — the catalog's value-priced group. VARIOUS MFR PG4670 is listed in this group.

In the Standard Replacement grade, ACDELCO, BOSCH, HASTINGS / BALDWIN and 2 other brands supply 5 parts: built to original-equipment specification. A representative part number is ACDELCO PF53.

Part numbers include VARIOUS MFR PG4670, BOSCH 72137WS and FAMOUS BRAND 85189, among others listed above.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Oil Pan Gasket parts for the 1979 Lancia Beta come from 3 brands — AJUSA, MAHLE / CLEVITE and VICTOR REINZ.

Part numbers include AJUSA 14030900, MAHLE / CLEVITE OS30586 and VICTOR REINZ 711296100.

This table covers the rings that seal each piston to the cylinder wall. Read more

One part is listed for the 1979 Lancia Beta — ITM ENGINE COMPONENTS 0216045.

This table covers the Thrust washers. Read more

This group shows a single part: ITM ENGINE COMPONENTS 1T2826.

This table covers the Timing belts. Typical signs include squeal on cold start, cracked ribs, or glazing. Spin the tensioner and idlers by hand while the belt is off. Read more

2 Timing Belt parts are listed for the 1979 Lancia Beta, from ITM ENGINE COMPONENTS and ACDELCO.

Economy: 1 part, from ITM ENGINE COMPONENTS. A representative part number is ITM ENGINE COMPONENTS 4071.

The Standard Replacement section: 1 option from ACDELCO. ACDELCO TB020 is listed in this group.

Part numbers include ITM ENGINE COMPONENTS 4071 and ACDELCO TB020.

This table covers the wear sleeves used to restore a Timing Cover seal surface. Read more

3 Timing Cover Repair Sleeve parts for the 1979 Lancia Beta come from 2 brands — SCHAEFFLER and SKF.

Part numbers include SCHAEFFLER SS3480, SCHAEFFLER SR3483 and SKF 99153.

This table covers the seals at the Timing Cover. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Timing Cover Seal parts for the 1979 Lancia Beta come from 3 brands — ITM ENGINE COMPONENTS, SCHAEFFLER and SKF.

This group includes ITM ENGINE COMPONENTS 1506301, SCHAEFFLER SS2642 and SKF 15826.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

6 Valve Cover Gasket parts for the 1979 Lancia Beta come from 5 brands — ITM ENGINE COMPONENTS, AJUSA, FEL-PRO and 2 other brands. The "Popular" part is AJUSA 11002700.

Part numbers include AJUSA 11002700, FEL-PRO VS26065C and BECK/ARNLEY 0360263, among others listed above.

This table covers the pressed-in bronze and cast-iron guides that align valve stems. Typical signs include oil smoke on startup, a guide that has gone oval, or a valve that no longer seats quietly. Guides are a machine-shop fit. Confirm stem diameter in the notes before ordering. Read more

2 Valve Guide parts for the 1979 Lancia Beta come from ITM ENGINE COMPONENTS.

Part numbers include ITM ENGINE COMPONENTS VG1147CI and ITM ENGINE COMPONENTS VG1147BR.

This table covers the keepers that lock each valve-spring retainer to the stem. Read more

One part is listed for the 1979 Lancia Beta — ITM ENGINE COMPONENTS 051101.

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Valve Stem Seal parts for the 1979 Lancia Beta come from 2 brands — AJUSA and ITM ENGINE COMPONENTS.

Part numbers include AJUSA 12004500, AJUSA 57004900 and ITM ENGINE COMPONENTS SS154.