1979 Lancia Beta Ignition Parts

Engine:
2.0L L4

36 Ignition parts are listed for the 1979 Lancia Beta, in 7 part types, covering the 2.0L L4 engine. Each one has a brand, a manufacturer part number and notes that say where it fits.

On the 1979 Lancia Beta, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules. 28 parts of the 36 listed are Spark Plug (14 parts), Ignition Coil (7 parts) and Ignition Control Module (ICM) (7 parts). The other 4 part types cover the remaining 8 parts.

Distributor Cap

Brand Part Number Markets Notes Buy
WELLS 5D1122
🇺🇸 US 🇨🇦 CA
View on
Amazon

This table covers the Distributor caps. Typical signs include a leak at the neck, a cap that will not hold pressure, or a missing tether. Match the pressure rating or thread in the notes — radiator, reservoir and fuel caps are not interchangeable.

Distributor Rotor

Brand Part Number Markets Notes Buy
LILAND GLOBAL MA307LG
🇺🇸 US 🇨🇦 CA
PremiumBlack Brass
View on
Amazon
STANDARD MOTOR PRODUCTS MA307
🇺🇸 US 🇨🇦 CA
View on
Amazon

This table covers the Distributor rotors. Typical signs include shudder under braking, or a lip at the outer edge. Do not put new pads on a rotor that is below minimum thickness.

Ignition Coil

Economy

Brand Part Number Markets Notes Buy
FVP UC12F
🇺🇸 US 🇨🇦 CA
View on
Amazon
HOLSTEIN 2IGC0056
🇺🇸 US 🇨🇦 CA
View on
Amazon
SKP SKUC12
🇺🇸 US 🇨🇦 CA
View on
Amazon
STANDARD MOTOR PRODUCTS UC12T
🇺🇸 US 🇨🇦 CA
T-Series
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
ACDELCO Popular U505
🇺🇸 US 🇨🇦 CA
Professional
View on
Amazon
WELLS Popular 5C1026
🇺🇸 US 🇨🇦 CA
Requires External Resistor: YES
View on
Amazon
STANDARD MOTOR PRODUCTS UC12
🇺🇸 US 🇨🇦 CA
View on
Amazon

This table covers the coils that fire each spark plug. Typical signs include a misfire that follows one cylinder, a snap in damp weather, or a coil that is swollen or cracked. Swap a suspect coil with a neighbor to confirm, then replace boots that tore on the way off.

Ignition Control Module (ICM)

Economy

Brand Part Number Markets Notes Buy
STANDARD MOTOR PRODUCTS Popular LX301T
🇺🇸 US 🇨🇦 CA
T-Series
View on
Amazon
ULTRA-POWER LX301
🇺🇸 US 🇨🇦 CA
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
UNITED MOTOR PRODUCTS Popular M1906
🇺🇸 US 🇨🇦 CA
OE Design
View on
Amazon
DELPHI DS10071
🇺🇸 US 🇨🇦 CA
View on
Amazon
HOLSTEIN 2IGM0036
🇺🇸 US 🇨🇦 CA
View on
Amazon
STANDARD MOTOR PRODUCTS LX301
🇺🇸 US 🇨🇦 CA
View on
Amazon
WAI GLOBAL DM1906
🇺🇸 US 🇨🇦 CA
View on
Amazon

This table covers the Ignition control modules.

Spark Plug

Summary: Notes include pre-set gaps of 0.024", 0.030", 0.031", 0.032", 0.035", 0.036", 0.040" and 0.041". Replacement brands in this table include NGK, CHAMPION and ACDELCO.

Copper / Nickel

Brand Part Number Markets Notes Buy
NGK Popular 4008
🇺🇸 US 🇨🇦 CA
StandardPre-Set Gap: 0.032"
Fitment notes — NGK 4008
StandardPre-Set Gap: 0.032"
OE-Recommended Gap: 0.030 IN
View on
Amazon
ACDELCO R42XLS
🇺🇸 US 🇨🇦 CA
ProfessionalConventional
Fitment notes — ACDELCO R42XLS
ProfessionalConventionalPre-Set Gap: 0.035"
Original Equipment-Recommended Gap: .030
View on
Amazon
BOSCH 7900
🇺🇸 US 🇨🇦 CA
NickelPre-Set Gap: 0.031"
Fitment notes — BOSCH 7900
NickelPre-Set Gap: 0.031"
Original Center Electrode Material is Copper/Nickel
View on
Amazon
CHAMPION 415
🇺🇸 US 🇨🇦 CA
Copper PlusPre-Set Gap: 0.032"
Fitment notes — CHAMPION 415
Copper PlusPre-Set Gap: 0.032"
OE TypeOE-Recommended Gap: 0.024"Resistor Plug
View on
Amazon
CHAMPION 4151
🇺🇸 US 🇨🇦 CA
Copper PlusClassification: Champion Copper Plus Small Engine
Fitment notes — CHAMPION 4151
Copper PlusClassification: Champion Copper Plus Small Engine
OE TypeOE-Recommended Gap: 0.024"Resistor Plug
View on
Amazon
NGK 6427
🇺🇸 US 🇨🇦 CA
V-PowerPre-Set Gap: 0.032"
Fitment notes — NGK 6427
V-PowerPre-Set Gap: 0.032"
OE-Recommended Gap: 0.030 IN
View on
Amazon
NGK 7131
🇺🇸 US 🇨🇦 CA
StandardPre-Set Gap: 0.036"
Fitment notes — NGK 7131
StandardPre-Set Gap: 0.036"
OE-Recommended Gap: 0.030 IN
View on
Amazon

Double Platinum (lasts up to 3x longer than Copper / Nickel)

Brand Part Number Markets Notes Buy
ACDELCO 41804
🇺🇸 US 🇨🇦 CA
ProfessionalDouble Platinum
Fitment notes — ACDELCO 41804
ProfessionalDouble PlatinumPre-Set Gap: 0.035"
OE-Recommended Gap: 0.030"
View on
Amazon
CHAMPION 7415
🇺🇸 US 🇨🇦 CA
Double Platinum PowerPre-Set Gap: 0.032"
Fitment notes — CHAMPION 7415
Double Platinum PowerPre-Set Gap: 0.032"
OE-Recommended Gap: 0.024"Resistor Plug
View on
Amazon

Iridium (lasts up to 4x longer than Copper / Nickel)

Brand Part Number Markets Notes Buy
NGK Popular 6637
🇺🇸 US 🇨🇦 CA
Iridium IXPre-Set Gap: 0.032"
Fitment notes — NGK 6637
Iridium IXPre-Set Gap: 0.032"
OE-Recommended Gap: 0.030 IN
View on
Amazon
CHAMPION 9804
🇺🇸 US 🇨🇦 CA
IridiumPre-Set Gap: 0.03"
Fitment notes — CHAMPION 9804
IridiumPre-Set Gap: 0.03"
OE-Recommended Gap: 0.024"
View on
Amazon
SKP SP1041
🇺🇸 US 🇨🇦 CA
Tapered Ground Electrode with Platinum Chip
Fitment notes — SKP SP1041
Tapered Ground Electrode with Platinum Chip
Gap: .030
View on
Amazon

Platinum (lasts up to 2x longer than Copper / Nickel)

Brand Part Number Markets Notes Buy
NGK Popular 7084
🇺🇸 US 🇨🇦 CA
G-PowerPre-Set Gap: 0.040"
Fitment notes — NGK 7084
G-PowerPre-Set Gap: 0.040"
OE-Recommended Gap: 0.030 IN
View on
Amazon
ACDELCO 4
🇺🇸 US 🇨🇦 CA
ProfessionalRapidfire
Fitment notes — ACDELCO 4
ProfessionalRapidfirePre-Set Gap: 0.041"
OE-Recommended Gap: 0.030" (IN)
View on
Amazon

This table covers the spark plugs for this engine. Typical signs include misfire under load, rough idle, or a flashing check-engine light. Verify the gap even on pre-gapped plugs, and replace coil boots that come off a high-mileage engine.

Spark Plug Non-Fouler

Brand Part Number Markets Notes Buy
DORMAN 42004
🇺🇸 US 🇨🇦 CA
14mm Gasket Seat Long Reach
Fitment notes — DORMAN 42004
14mm Gasket Seat Long Reach
14 mm Gasket Seat3/4 In. Reach
View on
Amazon

This table covers the non-foulers that space a spark plug away from oil fouling.

Spark Plug Wire

Premium

Brand Part Number Markets Notes Buy
STANDARD MOTOR PRODUCTS 7423
🇺🇸 US 🇨🇦 CA
SetStandard® Premium
View on
Amazon
UNITED MOTOR PRODUCTS 7400
🇺🇸 US 🇨🇦 CA
United-PackardSet
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
STANDARD MOTOR PRODUCTS 27423
🇺🇸 US 🇨🇦 CA
Pro SeriesSet
View on
Amazon
WALKER PRODUCTS 9241021
🇺🇸 US 🇨🇦 CA
Direct FitSet
Fitment notes — WALKER PRODUCTS 9241021
Direct FitSetSuppression Core
View on
Amazon

This table covers the Spark Plug wires.

Buying Ignition Parts for a 1979 Lancia Beta

On this vehicle, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules.

  • Confirm you have the 2.0L L4 engine — every part on this page is matched to it.
  • Read the notes on each row for position, trim and spec qualifiers before you order.
  • Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
  • Cross-reference the manufacturer part number against your old part or a service-manual listing.

Start with the largest groups on this page: Spark Plug and Ignition Coil .

Frequently Asked Questions

How many ignition parts fit the 1979 Lancia Beta?

Our catalog currently lists 36 ignition parts for the 1979 Lancia Beta across 7 subcategories and 16 brands, covering the 2.0L L4 engine. Each part is matched to the engine(s) it fits.

What are the signs of ignition problems on a 1979 Lancia Beta?

Common symptoms include misfires under load, rough idle, flashing check-engine light, or poor starting in damp weather. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.

What spark-plug gap is listed for the 1979 Lancia Beta?

Notes on this page include pre-set gaps of 0.024", 0.030", 0.031", 0.032", 0.035", 0.036", 0.040" and 0.041". Still verify against spec — even “pre-gapped” plugs should be checked before they go in.

What should I replace at the same time?

Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.

What do the market flags (US, CA, MX) on each part mean?

They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1979 Lancia Beta was originally sold in the US, the safest choice is a part marked for the US market.

How do I make sure a part fits my 1979 Lancia Beta?

Every part on this page is matched to the 2.0L L4 engine. Then gap matters even on “pre-gapped” plugs — verify against spec, and replace coil boots when they come off a high-mileage engine. The notes column carries position and trim qualifiers where they apply.

Other Parts for the 1979 Lancia Beta

Ignition Parts for Other Lancia Beta Years

Switch vehicle or jump to a subcategory

Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.