2007 Lotus Exige Engine Parts

Engine:

Showing parts for every engine. Select an engine to see only what fits.

80 Engine parts are listed for the 2007 Lotus Exige, in 18 part types, covering both the 1.8L L4 and the 1.8L L4 Supercharged. Each one has a brand, a manufacturer part number and notes that say where it fits.

The engine on the 2007 Lotus Exige covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components. The largest groups are Oil Filter (14 parts), Crankshaft Seal (10 parts) and Crankshaft Repair Sleeve (6 parts). The other 15 part types cover the remaining 50 parts.

Connecting Rod Bearing

High Performance

Brand Part Number Markets Notes Buy
KING ENGINE BEARINGS Fits: 1.8L L4 Supercharged CR4608XP
🇺🇸 US 🇲🇽 MX
SetRace bearings, Trimetal [Pmax Black]
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
KING ENGINE BEARINGS Fits: 1.8L L4 Supercharged CR4608SI
🇺🇸 US 🇲🇽 MX
SetBimetal (Aluminum Silicon Base)
View on
Amazon

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.

Conversion / Lower Gasket Set

Brand Part Number Markets Notes Buy
APEX Fits: 1.8L L4 Supercharged ACS8062
🇺🇸 US 🇲🇽 MX
View on
Amazon
FEL-PRO Fits: 1.8L L4 Supercharged CS26154
🇺🇸 US 🇲🇽 MX
View on
Amazon
MAHLE / CLEVITE Fits: 1.8L L4 Supercharged CS54394
🇺🇸 US 🇲🇽 MX
View on
Amazon
VICTOR REINZ Fits: 1.8L L4 Supercharged 081161301
🇺🇸 US 🇲🇽 MX
View on
Amazon

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.

Crankshaft Main Bearing

Brand Part Number Markets Notes Buy
KING ENGINE BEARINGS Fits: 1.8L L4 Supercharged MB5375AM
🇺🇸 US 🇲🇽 MX
SetBimetal (Aluminum Base)
View on
Amazon

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.

Crankshaft Repair Sleeve

Brand Part Number Markets Notes Buy
NATIONAL Popular Fits: 1.8L L4 Supercharged 99147
🇺🇸 US 🇲🇽 MX
Front0.512 IN Width
Fitment notes — NATIONAL 99147
Front0.512 IN Width1.78 IN Outside Diameter
View on
Amazon
WJB / INMOTION PARTS Popular Fits: 1.8L L4 Supercharged WS99333
🇺🇸 US 🇲🇽 MX
Rear
View on
Amazon
BCA Fits: 1.8L L4 Supercharged NS99147
🇺🇸 US 🇲🇽 MX
Front
View on
Amazon
SCHAEFFLER Fits: 1.8L L4 Supercharged SR3476
🇺🇸 US 🇲🇽 MX
Front16.99 mm Width
Fitment notes — SCHAEFFLER SR3476
Front16.99 mm Width38 MM Outside Diameter
View on
Amazon
SCHAEFFLER Fits: 1.8L L4 Supercharged SR3556
🇺🇸 US 🇲🇽 MX
Rear24.99 mm Width
Fitment notes — SCHAEFFLER SR3556
Rear24.99 mm Width84.89 mm Inside Diameter
View on
Amazon
WJB / INMOTION PARTS Fits: 1.8L L4 Supercharged WS99147
🇺🇸 US 🇲🇽 MX
Installation Depth: 0.98399999999999999 In
Fitment notes — WJB / INMOTION PARTS WS99147
Installation Depth: 0.98399999999999999 In
Front
View on
Amazon

This table covers the sleeves used to restore a grooved crankshaft seal surface.

Crankshaft Seal

Brand Part Number Markets Notes Buy
NATIONAL Popular Fits: 1.8L L4 Supercharged 223801
🇺🇸 US 🇲🇽 MX
Front
View on
Amazon
WJB / INMOTION PARTS Popular Fits: 1.8L L4 Supercharged WS223801
🇺🇸 US 🇲🇽 MX
Front
View on
Amazon
APEX Fits: 1.8L L4 Supercharged ABS862
🇺🇸 US 🇲🇽 MX
Rear
View on
Amazon
BCA Fits: 1.8L L4 Supercharged NS223801
🇺🇸 US 🇲🇽 MX
Front
View on
Amazon
FEL-PRO Fits: 1.8L L4 Supercharged BS40665
🇺🇸 US 🇲🇽 MX
Rubber
Fitment notes — FEL-PRO BS40665
Rubber
Rear1 Piece
View on
Amazon
MAHLE / CLEVITE Fits: 1.8L L4 Supercharged JV1663
🇺🇸 US 🇲🇽 MX
Set
Fitment notes — MAHLE / CLEVITE JV1663
Set
Rear
View on
Amazon
NATIONAL Fits: 1.8L L4 Supercharged 710765
🇺🇸 US 🇲🇽 MX
Rear
View on
Amazon
SCHAEFFLER Fits: 1.8L L4 Supercharged SS2511
🇺🇸 US 🇲🇽 MX
Front1.97" I:D X 1.98" O.D. X 0.31" Width
View on
Amazon
VICTOR REINZ Fits: 1.8L L4 Supercharged 815333200
🇺🇸 US 🇲🇽 MX
RubberSealing Surface Material: Molded Rubber and Metal
Fitment notes — VICTOR REINZ 815333200
RubberSealing Surface Material: Molded Rubber and Metal
Rear1 Piece
View on
Amazon
WJB / INMOTION PARTS Fits: 1.8L L4 Supercharged WS710765
🇺🇸 US 🇲🇽 MX
Rear
View on
Amazon

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Cylinder Head Bolt

Brand Part Number Markets Notes Buy
FEL-PRO Popular Fits: 1.8L L4 Supercharged ES71066
🇺🇸 US 🇲🇽 MX
Set
Fitment notes — FEL-PRO ES71066
Set
Head Bolts with Washers
View on
Amazon
APEX Fits: 1.8L L4 Supercharged AHB862
🇺🇸 US 🇲🇽 MX
Set
View on
Amazon
ITM ENGINE COMPONENTS Fits: 1.8L L4 Supercharged 10001508
🇺🇸 US 🇲🇽 MX
Set
View on
Amazon
MAHLE / CLEVITE Fits: 1.8L L4 Supercharged GS33395
🇺🇸 US 🇲🇽 MX
Cylinder Head Bolt KitSet
Fitment notes — MAHLE / CLEVITE GS33395
Cylinder Head Bolt KitSetSteel
View on
Amazon
VICTOR REINZ Fits: 1.8L L4 Supercharged 143232901
🇺🇸 US 🇲🇽 MX
SetThread Diameter: 10 MM
Fitment notes — VICTOR REINZ 143232901
SetThread Diameter: 10 MM
Head Bolts with Washers
View on
Amazon

This table covers the bolts that clamp the cylinder head to the block.

Cylinder Head Gasket

Brand Part Number Markets Notes Buy
APEX Fits: 1.8L L4 Supercharged AHG862
🇺🇸 US 🇲🇽 MX
View on
Amazon
FEL-PRO Fits: 1.8L L4 Supercharged 26154PT
🇺🇸 US 🇲🇽 MX
Perma TorqueMLS
View on
Amazon
MAHLE / CLEVITE Fits: 1.8L L4 Supercharged 54394
🇺🇸 US 🇲🇽 MX
Multi-Layered Steel
View on
Amazon
VICTOR REINZ Fits: 1.8L L4 Supercharged 615404000
🇺🇸 US 🇲🇽 MX
View on
Amazon

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Cylinder Head Gasket Set

Brand Part Number Markets Notes Buy
APEX Popular Fits: 1.8L L4 Supercharged AHS8062
🇺🇸 US 🇲🇽 MX
View on
Amazon
FEL-PRO Fits: 1.8L L4 Supercharged HS26154PT1
🇺🇸 US 🇲🇽 MX
Includes Permadry Molded Rubber Valve Cover Gasket(s), Valve Stem Seals
View on
Amazon
FEL-PRO Fits: 1.8L L4 Supercharged HS26154PT1VK
🇺🇸 US 🇲🇽 MX
Permadry Molded Rubber Valve Cover Gasket(s) IncludedIncludes Head Bolts, Valve Stem Seals
Fitment notes — FEL-PRO HS26154PT1VK
Permadry Molded Rubber Valve Cover Gasket(s) IncludedIncludes Head Bolts, Valve Stem Seals
Head Bolts with WashersHead Bolt Replacement Recommended
View on
Amazon
MAHLE / CLEVITE Fits: 1.8L L4 Supercharged HS54394A
🇺🇸 US 🇲🇽 MX
Includes Valve Stem Seals
Fitment notes — MAHLE / CLEVITE HS54394A
Includes Valve Stem Seals
Throttle Body Gasket not Included
View on
Amazon
VICTOR REINZ Fits: 1.8L L4 Supercharged 025404001
🇺🇸 US 🇲🇽 MX
View on
Amazon

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.

Intake Manifold Gasket

Brand Part Number Markets Notes Buy
APEX Fits: 1.8L L4 Supercharged AMS8620
🇺🇸 US 🇲🇽 MX
Set
View on
Amazon
FEL-PRO Fits: 1.8L L4 Supercharged MS93867
🇺🇸 US 🇲🇽 MX
Set
Fitment notes — FEL-PRO MS93867
Set
Lower and Upper
View on
Amazon
MAHLE / CLEVITE Fits: 1.8L L4 Supercharged MS19228
🇺🇸 US 🇲🇽 MX
Multi-Layered Steel
View on
Amazon
VICTOR REINZ Fits: 1.8L L4 Supercharged 715410300
🇺🇸 US 🇲🇽 MX
Set
View on
Amazon

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Oil Drain Plug Gasket

Brand Part Number Markets Notes Buy
FEL-PRO Fits: 1.8L L4 Supercharged 70822
🇺🇸 US 🇲🇽 MX
0.500 (in) Inside Diameter x 0.900 (in) Outside DiameterFlat Washer
Fitment notes — FEL-PRO 70822
0.500 (in) Inside Diameter x 0.900 (in) Outside DiameterFlat WasherPlastic
View on
Amazon
MAHLE / CLEVITE Fits: 1.8L L4 Supercharged 2051
🇺🇸 US 🇲🇽 MX
Composite
Fitment notes — MAHLE / CLEVITE 2051
Composite
with 1/2 IN I.D., with English Threads
View on
Amazon
VICTOR REINZ Fits: 1.8L L4 Supercharged 711346200
🇺🇸 US 🇲🇽 MX
0.500 IN Inside Diameter
View on
Amazon

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Oil Filter

Economy

Brand Part Number Markets Notes Buy
FVP Fits: 1.8L L4 Supercharged R7145
🇺🇸 US 🇲🇽 MX
Media Material: Enhanced CelluloseSpin-On Filter
View on
Amazon
PRO-TEC Fits: 1.8L L4 Supercharged PXL57145
🇺🇸 US 🇲🇽 MX
Media Material: Enhanced CelluloseSpin-On Filter
View on
Amazon
VARIOUS MFR Fits: 1.8L L4 Supercharged PG4476
🇺🇸 US 🇲🇽 MX
Spin-On
View on
Amazon

High Performance / Heavy Duty

Brand Part Number Markets Notes Buy
WIX Fits: 1.8L L4 Supercharged 57145XP
🇺🇸 US 🇲🇽 MX
XP Extreme DutyBest For Synthetic Motor Oils
Fitment notes — WIX 57145XP
XP Extreme DutyBest For Synthetic Motor OilsHeight: 3.402 InSpin-On Filter
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
ACDELCO Popular Fits: 1.8L L4 Supercharged PF1233
🇺🇸 US 🇨🇦 CA
GM Original EquipmentSpin-On
View on
Amazon
WIX Popular Fits: 1.8L L4 Supercharged 57145
🇺🇸 US 🇲🇽 MX
Media Material: Enhanced CelluloseSpin-On Filter
View on
Amazon
BECK/ARNLEY Fits: 1.8L L4 Supercharged 0418079
🇺🇸 US 🇲🇽 MX
View on
Amazon
BOSCH Fits: 1.8L L4 Supercharged 3325
🇺🇸 US 🇲🇽 MX
Premium Oil Filter
View on
Amazon
MAHLE / CLEVITE Fits: 1.8L L4 Supercharged OC217
🇺🇸 US 🇲🇽 MX
Spin-On
View on
Amazon
VARIOUS MFR Fits: 1.8L L4 Supercharged PG4476EX
🇺🇸 US 🇲🇽 MX
Extended LifeSpin-On
View on
Amazon
Brand Part Number Markets Notes Buy
FRAM Fits: 1.8L L4 FE4967
🇺🇸 US 🇨🇦 CA
Spin-OnTough Guard or Synthetic Endurance
View on
Amazon
PUROLATOR Fits: 1.8L L4 3325
🇺🇸 US
Oil
View on
Amazon
PUROLATOR Fits: 1.8L L4 72167WS
🇺🇸 US
Workshop Oil
View on
Amazon
PUROLATOR Fits: 1.8L L4 D3325
🇺🇸 US
Distance Plus Oil
View on
Amazon

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive.

Oil Pan Gasket

Brand Part Number Markets Notes Buy
APEX Fits: 1.8L L4 Supercharged AOP855
🇺🇸 US 🇲🇽 MX
View on
Amazon
FEL-PRO Fits: 1.8L L4 Supercharged OS30705C
🇺🇸 US 🇲🇽 MX
View on
Amazon
MAHLE / CLEVITE Fits: 1.8L L4 Supercharged OS32248
🇺🇸 US 🇲🇽 MX
Cork-Rubber
Fitment notes — MAHLE / CLEVITE OS32248
Cork-Rubber
OIL PAN GASKET SET
View on
Amazon
ULTRA-POWER Fits: 1.8L L4 OS30705C
🇺🇸 US 🇨🇦 CA
Set
View on
Amazon
VICTOR REINZ Fits: 1.8L L4 Supercharged 101022601
🇺🇸 US 🇲🇽 MX
View on
Amazon

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Oil Pump Pickup Tube Gasket

Brand Part Number Markets Notes Buy
FEL-PRO Fits: 1.8L L4 Supercharged 73111
🇺🇸 US 🇲🇽 MX
View on
Amazon

This table covers the gaskets that seal the Oil Pump Pickup Tube. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Thrust Washer

Brand Part Number Markets Notes Buy
KING ENGINE BEARINGS Fits: 1.8L L4 Supercharged TW185AM
🇺🇸 US 🇲🇽 MX
Bimetal (Aluminum Base)
Fitment notes — KING ENGINE BEARINGS TW185AM
Bimetal (Aluminum Base)
(Size: Standard)
View on
Amazon

This table covers the Thrust washers.

Timing Chain & Component Kit

Brand Part Number Markets Notes Buy
INA Fits: 1.8L L4 Supercharged ZC1004300
🇺🇸 US 🇲🇽 MX
Kit Contains 1 Chain, 1 Crank Sprocket, 1 Camshaft Sprocket, 1 Camshaft Seal, 1 Guide, 1 Tensioner
View on
Amazon

This table covers kits that group a timing chain with the related tensioners and guides.

Timing Cover Gasket

Brand Part Number Markets Notes Buy
APEX Fits: 1.8L L4 Supercharged ATC8620
🇺🇸 US 🇲🇽 MX
View on
Amazon
FEL-PRO Fits: 1.8L L4 Supercharged TCS45047
🇺🇸 US 🇲🇽 MX
View on
Amazon
MAHLE / CLEVITE Fits: 1.8L L4 Supercharged JV5033
🇺🇸 US 🇲🇽 MX
Set
View on
Amazon
ULTRA-POWER Fits: 1.8L L4 TCS45047
🇺🇸 US 🇨🇦 CA
Set
View on
Amazon
VICTOR REINZ Fits: 1.8L L4 Supercharged 151077501
🇺🇸 US 🇲🇽 MX
Set
View on
Amazon

This table covers the gaskets that seal the Timing Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Valve Cover Gasket

Brand Part Number Markets Notes Buy
APEX Fits: 1.8L L4 Supercharged AVC862S
🇺🇸 US 🇲🇽 MX
Includes Spark Plug Tube Seals
View on
Amazon
FEL-PRO Fits: 1.8L L4 Supercharged VS50546R
🇺🇸 US 🇲🇽 MX
Permadry Molded RubberIncludes Spark Plug Tube Seals
View on
Amazon
MAHLE / CLEVITE Fits: 1.8L L4 Supercharged VS50347
🇺🇸 US 🇲🇽 MX
SetMolded Rubber
Fitment notes — MAHLE / CLEVITE VS50347
SetMolded RubberIncludes Spark Plug Tube Seals
View on
Amazon
ULTRA-POWER Fits: 1.8L L4 VS50546R
🇺🇸 US 🇨🇦 CA
SetIncludes Spark Plug Tube Seals, Molded Rubber Gasket(s)
Fitment notes — ULTRA-POWER VS50546R
SetIncludes Spark Plug Tube Seals, Molded Rubber Gasket(s)Molded Rubber
View on
Amazon
VICTOR REINZ Fits: 1.8L L4 Supercharged 155410101
🇺🇸 US 🇲🇽 MX
Set
View on
Amazon

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Valve Stem Seal

Brand Part Number Markets Notes Buy
APEX Fits: 1.8L L4 Supercharged AVS8062
🇺🇸 US 🇲🇽 MX
Set
Fitment notes — APEX AVS8062
Set
Intake and Exhaust
View on
Amazon
FEL-PRO Fits: 1.8L L4 Supercharged SS71053
🇺🇸 US 🇲🇽 MX
Set
Fitment notes — FEL-PRO SS71053
Set
Intake and Exhaust
View on
Amazon
MAHLE / CLEVITE Fits: 1.8L L4 Supercharged SS45939
🇺🇸 US 🇲🇽 MX
SetMetal with Molded Rubber
Fitment notes — MAHLE / CLEVITE SS45939
SetMetal with Molded Rubber
Intake and ExhaustPositive Type
View on
Amazon
VICTOR REINZ Fits: 1.8L L4 Supercharged 125411201
🇺🇸 US 🇲🇽 MX
SetContains 16 Pieces
View on
Amazon

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Buying Engine Parts for a 2007 Lotus Exige

On this vehicle, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components.

  • Match the engine first. Every engine part here is engine-specific; each row shows which engine(s) it fits.
  • Read the notes on each row for position, trim and spec qualifiers before you order.
  • Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
  • Cross-reference the manufacturer part number against your old part or a service-manual listing.

Start with the largest groups on this page: Oil Filter and Crankshaft Seal .

Frequently Asked Questions

How many engine parts fit the 2007 Lotus Exige?

Our catalog currently lists 80 engine parts for the 2007 Lotus Exige across 18 subcategories and 21 brands, covering both the 1.8L L4 and the 1.8L L4 Supercharged. Each part is matched to the engine(s) it fits.

Do engine parts differ between 2007 Lotus Exige engines?

Yes. Every engine part on this page is engine-specific. Each row shows which engine(s) it fits — use the filter at the top to hide the rest. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.

What are the signs of engine problems on a 2007 Lotus Exige?

Common symptoms include oil spots under the vehicle, blue or white exhaust smoke, ticking from the valvetrain, or coolant mysteriously disappearing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.

What should I replace at the same time?

Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.

What do the market flags (US, CA, MX) on each part mean?

They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2007 Lotus Exige was originally sold in the US, the safest choice is a part marked for the US market.

How do I make sure a part fits my 2007 Lotus Exige?

First match the engine — each row shows which engine(s) the part fits. Then engine hard parts are unforgiving of guesswork — confirm the casting or engine code before ordering, because one model year can hide two different blocks. The notes column carries position and trim qualifiers where they apply.

Other Parts for the 2007 Lotus Exige

Engine Parts for Other Lotus Exige Years

Switch vehicle or jump to a subcategory

Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.