87 Engine parts are listed for the 2010 Lotus Exige, in 19 part types, covering the 1.8L L4 Supercharged engine. Each one has a brand, a manufacturer part number and notes that say where it fits.
On the 2010 Lotus Exige, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components. Most of the listed parts are Oil (15 parts), Crankshaft Seal (10 parts) and Crankshaft Repair Sleeve (6 parts). The other 16 part types cover the remaining 56 parts.
The 2010 Lotus Exige came with a single engine, the 1.8L L4 Supercharged, and every part is verified against it.
19 brands supply engine parts for the 2010 Lotus Exige, led by FEL-PRO (13 parts), MAHLE / CLEVITE (12 parts) and VICTOR REINZ (11 parts), plus 16 more brands. Quality grades include Standard Replacement, Economy and High Performance.
A "Popular" badge means the source catalog flagged the part as frequently chosen for the 2010 Lotus Exige. 14 parts have it, including NATIONAL 99147 (Crankshaft Repair Sleeve) and NATIONAL 223801 (Crankshaft Seal). Each part number opens a page with every vehicle that part fits.
Connecting Rod Bearing
High Performance
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| KING ENGINE BEARINGS | CR4608XP | 🇺🇸 US 🇨🇦 CA | SetRace bearings, Trimetal [Pmax Black] | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| KING ENGINE BEARINGS | CR4608SI | 🇺🇸 US 🇨🇦 CA | SetBimetal (Aluminum Silicon Base) | View on Amazon |
This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.
KING ENGINE BEARINGS supplies both parts for the 2010 Lotus Exige.
In the High Performance grade, KING ENGINE BEARINGS supplies 1 part: engineered beyond original-equipment specification. A representative part number is KING ENGINE BEARINGS CR4608XP.
The Standard Replacement section lists 1 option from KING ENGINE BEARINGS — built to original-equipment specification. KING ENGINE BEARINGS CR4608SI is listed in this group.
Part numbers include KING ENGINE BEARINGS CR4608XP and KING ENGINE BEARINGS CR4608SI.
Conversion / Lower Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| APEX | ACS8062 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| FEL-PRO | CS26154 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| MAHLE / CLEVITE | CS54394 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| VICTOR REINZ | 081161301 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
4 Conversion / Lower Gasket Set parts are listed for the 2010 Lotus Exige, from APEX, FEL-PRO, MAHLE / CLEVITE and 1 other brand.
This group includes APEX ACS8062, FEL-PRO CS26154 and MAHLE / CLEVITE CS54394 and the remaining parts above.
Crankshaft Main Bearing
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| KING ENGINE BEARINGS | MB5375AM | 🇺🇸 US 🇨🇦 CA | SetBimetal (Aluminum Base) | View on Amazon |
This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.
This group shows a single part: KING ENGINE BEARINGS MB5375AM.
Crankshaft Repair Sleeve
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| NATIONAL Popular | 99147 | 🇺🇸 US 🇨🇦 CA | Front0.512 IN Width | View on Amazon |
| WJB / INMOTION PARTS Popular | WS99333 | 🇺🇸 US 🇨🇦 CA | Rear | View on Amazon |
| BCA | NS99147 | 🇺🇸 US 🇨🇦 CA | Front | View on Amazon |
| SCHAEFFLER | SR3476 | 🇺🇸 US 🇨🇦 CA | Front16.99 mm Width | View on Amazon |
| SCHAEFFLER | SR3556 | 🇺🇸 US 🇨🇦 CA | Rear24.99 mm Width | View on Amazon |
| WJB / INMOTION PARTS | WS99147 | 🇺🇸 US 🇨🇦 CA | Installation Depth: 0.98399999999999999 In | View on Amazon |
This table covers the sleeves used to restore a grooved crankshaft seal surface.
6 Crankshaft Repair Sleeve parts for the 2010 Lotus Exige come from 4 brands — WJB / INMOTION PARTS, SCHAEFFLER, NATIONAL and 1 other brand. The "Popular" part is NATIONAL 99147.
This group includes NATIONAL 99147, WJB / INMOTION PARTS WS99333 and BCA NS99147 and the remaining parts above.
Crankshaft Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| NATIONAL Popular | 223801 | 🇺🇸 US 🇨🇦 CA | Front | View on Amazon |
| WJB / INMOTION PARTS Popular | WS223801 | 🇺🇸 US 🇨🇦 CA | Front | View on Amazon |
| APEX | ABS862 | 🇺🇸 US 🇨🇦 CA | Rear | View on Amazon |
| BCA | NS223801 | 🇺🇸 US 🇨🇦 CA | Front | View on Amazon |
| FEL-PRO | BS40665 | 🇺🇸 US 🇨🇦 CA | Rubber | View on Amazon |
| MAHLE / CLEVITE | JV1663 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
| NATIONAL | 710765 | 🇺🇸 US 🇨🇦 CA | Rear | View on Amazon |
| SCHAEFFLER | SS2511 | 🇺🇸 US 🇨🇦 CA | Front1.97" I:D X 1.98" O.D. X 0.31" Width | View on Amazon |
| VICTOR REINZ | 815333200 | 🇺🇸 US 🇨🇦 CA | RubberSealing Surface Material: Molded Rubber and Metal | View on Amazon |
| WJB / INMOTION PARTS | WS710765 | 🇺🇸 US 🇨🇦 CA | Rear | View on Amazon |
This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
10 Crankshaft Seal parts for the 2010 Lotus Exige come from 8 brands — NATIONAL, WJB / INMOTION PARTS, APEX and 5 other brands. The "Popular" part is NATIONAL 223801.
Cylinder Head Bolt
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Popular | ES71066 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
| APEX | AHB862 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
| ITM ENGINE COMPONENTS | 10001508 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
| MAHLE / CLEVITE | GS33395 | 🇺🇸 US 🇨🇦 CA | Cylinder Head Bolt KitSet | View on Amazon |
| VICTOR REINZ | 143232901 | 🇺🇸 US 🇨🇦 CA | SetThread Diameter: 10 MM | View on Amazon |
This table covers the bolts that clamp the cylinder head to the block.
5 Cylinder Head Bolt parts are listed for the 2010 Lotus Exige, from FEL-PRO, APEX, ITM ENGINE COMPONENTS and 2 other brands. FEL-PRO ES71066 carries the "Popular" badge.
This group includes FEL-PRO ES71066, APEX AHB862 and ITM ENGINE COMPONENTS 10001508 and the remaining parts above.
Cylinder Head Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| APEX | AHG862 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| FEL-PRO | 26154PT | 🇺🇸 US 🇨🇦 CA | Perma TorqueMLS | View on Amazon |
| MAHLE / CLEVITE | 54394 | 🇺🇸 US 🇨🇦 CA | Multi-Layered Steel | View on Amazon |
| VICTOR REINZ | 615404000 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
4 Cylinder Head Gasket parts are listed for the 2010 Lotus Exige, from APEX, FEL-PRO, MAHLE / CLEVITE and 1 other brand.
Part numbers include APEX AHG862, FEL-PRO 26154PT and MAHLE / CLEVITE 54394, among others listed above.
Cylinder Head Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| APEX Popular | AHS8062 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| FEL-PRO | HS26154PT1 | 🇺🇸 US 🇨🇦 CA | Includes Permadry Molded Rubber Valve Cover Gasket(s), Valve Stem Seals | View on Amazon |
| FEL-PRO | HS26154PT1VK | 🇺🇸 US 🇨🇦 CA | Permadry Molded Rubber Valve Cover Gasket(s) IncludedIncludes Head Bolts, Valve Stem Seals | View on Amazon |
| MAHLE / CLEVITE | HS54394A | 🇺🇸 US 🇨🇦 CA | Includes Valve Stem Seals | View on Amazon |
| VICTOR REINZ | 025404001 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
5 Cylinder Head Gasket Set parts are listed for the 2010 Lotus Exige, from FEL-PRO, APEX, MAHLE / CLEVITE and 1 other brand. APEX AHS8062 carries the "Popular" badge.
This group includes APEX AHS8062, FEL-PRO HS26154PT1 and FEL-PRO HS26154PT1VK and the remaining parts above.
Intake Manifold Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| APEX | AMS8620 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
| FEL-PRO | MS93867 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
| MAHLE / CLEVITE | MS19228 | 🇺🇸 US 🇨🇦 CA | Multi-Layered Steel | View on Amazon |
| VICTOR REINZ | 715410300 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
4 Intake Manifold Gasket parts are listed for the 2010 Lotus Exige, from APEX, FEL-PRO, MAHLE / CLEVITE and 1 other brand.
Part numbers include APEX AMS8620, FEL-PRO MS93867 and MAHLE / CLEVITE MS19228, among others listed above.
Oil
Summary: Notes list SAE 5W-40. Confirm the weight on the filler cap before you buy. Replacement brands in this table include LIQUI MOLY, LUCAS OIL and VALVOLINE.
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| LIQUI MOLY Popular | 20230 | 🇺🇸 US 🇨🇦 CA | Molygen New Generation 5W-401 Liter | View on Amazon |
| LIQUI MOLY Popular | 2332 | 🇺🇸 US 🇨🇦 CA | Leichtlauf High Tech 5W-405 Liter | View on Amazon |
| LIQUI MOLY Popular | 20232 | 🇺🇸 US 🇨🇦 CA | Molygen New Generation 5W-405 Liter | View on Amazon |
| LIQUI MOLY | 22120 | 🇺🇸 US 🇨🇦 CA | Top Tec 4110 5W-401 Liter | View on Amazon |
| LIQUI MOLY | 2040 | 🇺🇸 US 🇨🇦 CA | Synthoil Premium SAE 5W-401 Liter | View on Amazon |
| LIQUI MOLY | 2331 | 🇺🇸 US 🇨🇦 CA | Leichtlauf High Tech 5W-401 Liter | View on Amazon |
| LIQUI MOLY | 2329 | 🇺🇸 US 🇨🇦 CA | Top Tec 4100 5W-401 Liter | View on Amazon |
| LIQUI MOLY | 22122 | 🇺🇸 US 🇨🇦 CA | Top Tec 4110 5W-405 Liter | View on Amazon |
| LIQUI MOLY | 2041 | 🇺🇸 US 🇨🇦 CA | Synthoil Premium SAE 5W-405 Liter | View on Amazon |
| LIQUI MOLY | 2330 | 🇺🇸 US 🇨🇦 CA | Top Tec 4100 5W-405 Liter | View on Amazon |
| LIQUI MOLY | 20122 | 🇺🇸 US 🇨🇦 CA | Leichtlauf High Tech 5W-4020 Liter | View on Amazon |
| LUCAS OIL | 10189 | 🇺🇸 US 🇨🇦 CA | FULL SYNTHETIC MOTOR OIL SAE 5W-401 qt | View on Amazon |
| LUCAS OIL | 18012 | 🇺🇸 US 🇨🇦 CA | Full Synthetic Motor Oil SAE 5W-406 Gallon | View on Amazon |
| VALVOLINE | VV966 | 🇺🇸 US 🇨🇦 CA | European Vehicle Full Synthetic SAE 5W-401 Quart | View on Amazon |
| VALVOLINE | 881166 | 🇺🇸 US 🇨🇦 CA | European Vehicle Full Synthetic SAE 5W-40Easy Pour 5 Quart | View on Amazon |
This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable.
15 Oil parts for the 2010 Lotus Exige come from 3 brands — LIQUI MOLY, LUCAS OIL and VALVOLINE. The "Popular" part is LIQUI MOLY 20230.
Oil Drain Plug Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO | 70822 | 🇺🇸 US 🇨🇦 CA | 0.500 (in) Inside Diameter x 0.900 (in) Outside DiameterFlat Washer | View on Amazon |
| MAHLE / CLEVITE | 2051 | 🇺🇸 US 🇨🇦 CA | Composite | View on Amazon |
| VICTOR REINZ | 711346200 | 🇺🇸 US 🇨🇦 CA | 0.500 IN Inside Diameter | View on Amazon |
This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
3 Oil Drain Plug Gasket parts are listed for the 2010 Lotus Exige, from FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ.
Listed part numbers: FEL-PRO 70822, MAHLE / CLEVITE 2051 and VICTOR REINZ 711346200.
Oil Filter
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FRAM | FE4967 | 🇺🇸 US 🇨🇦 CA | Spin-OnTough Guard or Synthetic Endurance | View on Amazon |
| VARIOUS MFR | PG4476 | 🇺🇸 US 🇨🇦 CA | Spin-On | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ACDELCO Popular | PF1233 | 🇺🇸 US 🇨🇦 CA | GM Original EquipmentSpin-On | View on Amazon |
| BOSCH Popular | 3325 | 🇺🇸 US 🇨🇦 CA | Premium Oil Filter | View on Amazon |
| MAHLE / CLEVITE | OC217 | 🇺🇸 US 🇨🇦 CA | Spin-On | View on Amazon |
| VARIOUS MFR | PG4476EX | 🇺🇸 US 🇨🇦 CA | Extended LifeSpin-On | View on Amazon |
This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive.
6 Oil Filter parts for the 2010 Lotus Exige come from 5 brands — VARIOUS MFR, FRAM, ACDELCO and 2 other brands. The "Popular" part is ACDELCO PF1233.
The Economy section lists 2 options from FRAM and VARIOUS MFR — the catalog's value-priced group. FRAM FE4967 is listed in this group.
Standard Replacement: 4 parts, from ACDELCO, BOSCH, MAHLE / CLEVITE and 1 other brand. A representative part number is ACDELCO PF1233.
Part numbers include ACDELCO PF1233, FRAM FE4967 and VARIOUS MFR PG4476, among others listed above.
Oil Pan Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Popular | OS30705C | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| APEX | AOP855 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| MAHLE / CLEVITE | OS32248 | 🇺🇸 US 🇨🇦 CA | Cork-Rubber | View on Amazon |
| ULTRA-POWER | OS30705C | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
| VICTOR REINZ | 101022601 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
5 Oil Pan Gasket parts for the 2010 Lotus Exige come from 5 brands — FEL-PRO, APEX, MAHLE / CLEVITE and 2 other brands. The "Popular" part is FEL-PRO OS30705C.
Part numbers include FEL-PRO OS30705C, APEX AOP855 and MAHLE / CLEVITE OS32248, among others listed above.
Oil Pump Pickup Tube Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO | 73111 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the gaskets that seal the Oil Pump Pickup Tube. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
One part is listed for the 2010 Lotus Exige — FEL-PRO 73111.
Thrust Washer
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| KING ENGINE BEARINGS | TW185AM | 🇺🇸 US 🇨🇦 CA | Bimetal (Aluminum Base) | View on Amazon |
This table covers the Thrust washers.
This group shows a single part: KING ENGINE BEARINGS TW185AM.
Timing Chain & Component Kit
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| INA | ZC1004300 | 🇺🇸 US 🇨🇦 CA | Kit Contains 1 Chain, 1 Crank Sprocket, 1 Camshaft Sprocket, 1 Camshaft Seal, 1 Guide, 1 Tensioner | View on Amazon |
This table covers kits that group a timing chain with the related tensioners and guides.
This group shows a single part: INA ZC1004300.
Timing Cover Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Popular | TCS45047 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| APEX | ATC8620 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| MAHLE / CLEVITE | JV5033 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
| ULTRA-POWER | TCS45047 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
| VICTOR REINZ | 151077501 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
This table covers the gaskets that seal the Timing Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
5 Timing Cover Gasket parts for the 2010 Lotus Exige come from 5 brands — FEL-PRO, APEX, MAHLE / CLEVITE and 2 other brands. The "Popular" part is FEL-PRO TCS45047.
Part numbers include FEL-PRO TCS45047, APEX ATC8620 and MAHLE / CLEVITE JV5033, among others listed above.
Valve Cover Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| APEX Popular | AVC862S | 🇺🇸 US 🇨🇦 CA | Includes Spark Plug Tube Seals | View on Amazon |
| FEL-PRO | VS50546R | 🇺🇸 US 🇨🇦 CA | Permadry Molded RubberIncludes Spark Plug Tube Seals | View on Amazon |
| MAHLE / CLEVITE | VS50347 | 🇺🇸 US 🇨🇦 CA | SetMolded Rubber | View on Amazon |
| ULTRA-POWER | VS50546R | 🇺🇸 US 🇨🇦 CA | SetIncludes Spark Plug Tube Seals, Molded Rubber Gasket(s) | View on Amazon |
| VICTOR REINZ | 155410101 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
5 Valve Cover Gasket parts for the 2010 Lotus Exige come from 5 brands — APEX, FEL-PRO, MAHLE / CLEVITE and 2 other brands. The "Popular" part is APEX AVC862S.
Part numbers include APEX AVC862S, FEL-PRO VS50546R and MAHLE / CLEVITE VS50347, among others listed above.
Valve Stem Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| APEX | AVS8062 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
| FEL-PRO | SS71053 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
| MAHLE / CLEVITE | SS45939 | 🇺🇸 US 🇨🇦 CA | SetMetal with Molded Rubber | View on Amazon |
| VICTOR REINZ | 125411201 | 🇺🇸 US 🇨🇦 CA | SetContains 16 Pieces | View on Amazon |
This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
4 Valve Stem Seal parts for the 2010 Lotus Exige come from 4 brands — APEX, FEL-PRO, MAHLE / CLEVITE and 1 other brand.
Part numbers include APEX AVS8062, FEL-PRO SS71053 and MAHLE / CLEVITE SS45939, among others listed above.
Buying Engine Parts for a 2010 Lotus Exige
On this vehicle, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components.
- Confirm you have the 1.8L L4 Supercharged engine — every part on this page is matched to it.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Oil and Crankshaft Seal .
Frequently Asked Questions
How many engine parts fit the 2010 Lotus Exige?
Our catalog currently lists 87 engine parts for the 2010 Lotus Exige across 19 subcategories and 19 brands, covering the 1.8L L4 Supercharged engine. Each part is matched to the engine(s) it fits.
What are the signs of engine problems on a 2010 Lotus Exige?
Common symptoms include oil spots under the vehicle, blue or white exhaust smoke, ticking from the valvetrain, or coolant mysteriously disappearing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What oil viscosity is listed for the 2010 Lotus Exige?
Oil rows on this page include SAE 5W-40. Confirm the engine and the weight on the filler cap before you buy — high-mileage and standard fills can differ.
What should I replace at the same time?
Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2010 Lotus Exige was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 2010 Lotus Exige?
Every part on this page is matched to the 1.8L L4 Supercharged engine. Then engine hard parts are unforgiving of guesswork — confirm the casting or engine code before ordering, because one model year can hide two different blocks. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 2010 Lotus Exige
Engine Parts for Other Lotus Exige Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.