2014 Mitsubishi Lancer Drivetrain Parts

This table covers the seals where an axle shaft exits the housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: TIMKEN 223543.

This table covers the complete CV axle shafts from differential (or hub) to wheel. Typical signs include a click in tight turns, grease flung around the wheel well, or a vibration that builds with speed. A torn boot caught early is a boot kit; caught late it is the whole axle. Torque the axle nut to the method in the notes. Read more

19 CV Axle parts for the 2014 Mitsubishi Lancer come from 4 brands — TRAKMOTIVE, APWI, GSP and 1 other brand. The "Popular" part is APWI MI8424.

This table covers the constant-velocity joints at each end of a drive axle. Read more

This group shows a single part: GKN 305718.

This table covers the boots that keep grease in a CV joint. Typical signs include a split boot, grease flung around the joint, or a click once grit is inside. A boot caught early is a kit. Once the joint has clicked, the joint itself is usually worn. Read more

3 CV Joint Boot parts for the 2014 Mitsubishi Lancer come from 2 brands — MEVOTECH and GKN.

Part numbers include GKN 305912, MEVOTECH DX577 and MEVOTECH DX786.

This table covers the wear sleeves used to restore a grooved pinion seal surface. Read more

2 Differential Pinion Repair Sleeve parts for the 2014 Mitsubishi Lancer come from 2 brands — NATIONAL and WJB / INMOTION PARTS.

Part numbers include NATIONAL 99210 and WJB / INMOTION PARTS WS99210.

This table covers the seals at the differential pinion yoke. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Differential Pinion Seal parts for the 2014 Mitsubishi Lancer come from 2 brands — NATIONAL and WJB / INMOTION PARTS.

Listed part numbers: NATIONAL 711053 and WJB / INMOTION PARTS WS711053.

This table covers the seals at the Differential. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Differential Seal parts are listed for the 2014 Mitsubishi Lancer, from NATIONAL and WJB / INMOTION PARTS.

This group includes NATIONAL 710396 and WJB / INMOTION PARTS WS710396.

This table covers the driveshafts that carry torque from the transmission or transfer case. Read more

4 Drive Shaft parts are listed for the 2014 Mitsubishi Lancer, from DORMAN, GSP, TOP NOTCH and 1 other brand.

Listed part numbers: DORMAN 986286, GSP PS901722 and TOP NOTCH TN5111PS, plus the other parts above.

This table covers the gear oils specified for the axle or transfer case. Typical signs include a low-oil lamp, knocking, or oil that has gone thin before the next interval. Match the viscosity and spec in the notes, not just the weight on the bottle. Read more

7 Gear Oil parts for the 2014 Mitsubishi Lancer come from 2 brands — VALVOLINE and IDEMITSU. The "Popular" part is VALVOLINE VV820.

The SAE 75W-90 section lists 6 options from VALVOLINE — grouped under the catalog's "SAE 75W-90" designation — the notes column spells out what sets them apart. VALVOLINE VV820 is listed in this group.

The SP-III (SP3) section lists 1 option from IDEMITSU — grouped under the catalog's "SP-III (SP3)" designation — the notes column spells out what sets them apart. IDEMITSU 30040097750 is listed in this group.

This group includes VALVOLINE VV820, VALVOLINE VV975 and VALVOLINE 889785 and the remaining parts above.

This table covers the fluids specified for the transfer case. Typical signs include discolored fluid, a burnt smell, or a level that keeps dropping. Use only the specification in the notes — the tables group grades because they are not interchangeable. Read more

17 Transfer Case Fluid parts for the 2014 Mitsubishi Lancer come from 4 brands — VALVOLINE, LUCAS OIL, ACDELCO and 1 other brand. The "Popular" part is ACDELCO 109243.

The Dexron section lists 1 option from ACDELCO — grouped under the catalog's "Dexron" designation — the notes column spells out what sets them apart. ACDELCO 109243 is listed in this group.

The Multi-Vehicle section lists 6 options from VALVOLINE and LUCAS OIL — grouped under the catalog's "Multi-Vehicle" designation — the notes column spells out what sets them apart. VALVOLINE VV3246 is listed in this group.

The SAE 75W-90 section: 6 options from VALVOLINE. VALVOLINE VV820 is listed in this group.

The SP-III (SP3) section: 1 option from IDEMITSU. IDEMITSU 30040097750 is listed in this group.

3 further parts sit outside the graded sections, with the same engine-level match.

This table covers the wear sleeves used to restore a Transfer Case Output Shaft seal surface. Read more

3 Transfer Case Output Shaft Repair Sleeve parts for the 2014 Mitsubishi Lancer come from 3 brands — BCA, NATIONAL and WJB / INMOTION PARTS.

Listed part numbers: BCA NS99166, NATIONAL 99166 and WJB / INMOTION PARTS WS99166.

This table covers the seals at the Transfer Case Output Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Transfer Case Output Shaft Seal parts for the 2014 Mitsubishi Lancer come from 2 brands — NATIONAL and WJB / INMOTION PARTS.

Listed part numbers: NATIONAL 711115 and WJB / INMOTION PARTS WS711115.