36 Drivetrain parts are listed for the 2016 Mitsubishi Lancer, in 9 part types, covering both the 2.0L L4 and the 2.4L L4. Each one has a brand, a manufacturer part number and notes that say where it fits.
On the 2016 Mitsubishi Lancer, the drivetrain system moves power from transmission to wheels through axles, CV joints, driveshafts, differentials and wheel-end hardware. 26 parts of the 36 listed are CV Axle (20 parts), CV Joint Boot (3 parts) and Transfer Case Output Shaft Repair Sleeve (3 parts). The other 6 part types cover the remaining 10 parts.
The 2016 Mitsubishi Lancer was sold with both the 2.0L L4 and the 2.4L L4. Every part on this page is engine-specific. Each part shows which engine(s) it fits.
The most listed brands for 2016 Mitsubishi Lancer drivetrain parts are TRAKMOTIVE (7 parts), NATIONAL (5 parts) and WJB / INMOTION PARTS (5 parts), plus 8 more brands. Quality grades include Standard Replacement and Economy.
4 parts on this 2016 Mitsubishi Lancer page carry a "Popular" badge — the source catalog's flag for options frequently chosen for this vehicle — including APWI MI8400 (CV Axle) and APWI MI8412 (CV Axle). Click any part number to see every vehicle that part fits.
Axle Shaft Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| TIMKEN Fits: 2.0L L4 | 223543 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear | View on Amazon |
This table covers the seals where an axle shaft exits the housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
This group shows a single part: TIMKEN 223543.
CV Axle
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| CARDONE Fits: 2.0L L4 | 603573 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Remanufactured | View on Amazon |
| CARDONE Fits: 2.0L L4 | 603574 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Remanufactured | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| APWI Popular Fits: 2.0L L4 | MI8400 | 🇺🇸 US 🇨🇦 CA | Fits Front LeftAutomatic CVT trans.or Front Left | View on Amazon |
| APWI Popular Fits: 2.0L L4 | MI8412 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front LeftManual trans. | View on Amazon |
| APWI Popular Fits: 2.0L L4 | MI8401 | 🇺🇸 US | Front RightAutomatic CVT trans. | View on Amazon |
| TOP NOTCH Popular Fits: 2.0L L4 | TN12012 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front RightAutomatic CVT trans. | View on Amazon |
| CARDONE Fits: 2.0L L4 | 663573 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front LeftAutomatic CVT trans. | View on Amazon |
| CARDONE Fits: 2.0L L4 | 663574 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front RightAutomatic CVT trans. | View on Amazon |
| GSP Fits: 2.0L L4 | NCV51022 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front LeftManual trans. | View on Amazon |
| GSP Fits: 2.0L L4 | NCV51012 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front RightAutomatic CVT trans. | View on Amazon |
| GSP Fits: 2.0L L4 | NCV51006 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front LeftAutomatic CVT trans. | View on Amazon |
| GSP Fits: 2.0L L4 | NCV51010 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front RightManual trans. | View on Amazon |
| TOP NOTCH Fits: 2.0L L4 | TN12007 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front LeftAutomatic CVT trans. | View on Amazon |
| TRAKMOTIVE Fits: 2.0L L4 | MI8225 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear LeftES Model | View on Amazon |
| TRAKMOTIVE Fits: 2.0L L4 | MI8221 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front LeftManual Trans. | View on Amazon |
| TRAKMOTIVE Fits: 2.0L L4 | MI8223 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front RightFWD | View on Amazon |
| TRAKMOTIVE Fits: 2.0L L4 | MI8213 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front LeftAutomatic CVT trans. | View on Amazon |
| TRAKMOTIVE Fits: 2.0L L4 | MI8218 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front RightManual trans. | View on Amazon |
| TRAKMOTIVE Fits: 2.0L L4 | MI8212 | 🇺🇸 US 🇨🇦 CA | Front RightAWD | View on Amazon |
| TRAKMOTIVE Fits: 2.0L L4 | MI8224 | 🇺🇸 US 🇨🇦 CA | Rear RightAWD | View on Amazon |
This table covers the complete CV axle shafts from differential (or hub) to wheel. Typical signs include a click in tight turns, grease flung around the wheel well, or a vibration that builds with speed. A torn boot caught early is a boot kit; caught late it is the whole axle. Torque the axle nut to the method in the notes.
20 CV Axle parts for the 2016 Mitsubishi Lancer come from 5 brands — TRAKMOTIVE, CARDONE, GSP and 2 other brands. The "Popular" part is APWI MI8400.
The Economy section lists 2 options from CARDONE — the catalog's value-priced group. CARDONE 603573 is listed in this group.
In the Standard Replacement grade, TRAKMOTIVE, GSP, APWI and 2 other brands supply 18 parts: built to original-equipment specification. A representative part number is APWI MI8400.
CV Joint
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GKN Fits: 2.0L L4 | 305718 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Fits Front RightAWD | View on Amazon |
This table covers the constant-velocity joints at each end of a drive axle.
This group shows a single part: GKN 305718.
CV Joint Boot
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GKN Fits: 2.0L L4 | 305912 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | OUTER Diameter 1.102 In | View on Amazon |
| MEVOTECH Fits: 2.0L L4 | DX577 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front Inner | View on Amazon |
| MEVOTECH Fits: 2.0L L4 | DX786 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front Outer | View on Amazon |
This table covers the boots that keep grease in a CV joint. Typical signs include a split boot, grease flung around the joint, or a click once grit is inside. A boot caught early is a kit. Once the joint has clicked, the joint itself is usually worn.
3 CV Joint Boot parts for the 2016 Mitsubishi Lancer come from 2 brands — MEVOTECH and GKN.
Listed part numbers: GKN 305912, MEVOTECH DX577 and MEVOTECH DX786.
Differential Pinion Repair Sleeve
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| NATIONAL Fits: 2.0L L4 | 99210 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear Outer | View on Amazon |
| WJB / INMOTION PARTS Fits: 2.0L L4 | WS99210 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear Outer | View on Amazon |
This table covers the wear sleeves used to restore a grooved pinion seal surface.
2 Differential Pinion Repair Sleeve parts for the 2016 Mitsubishi Lancer come from 2 brands — NATIONAL and WJB / INMOTION PARTS.
Part numbers include NATIONAL 99210 and WJB / INMOTION PARTS WS99210.
Differential Pinion Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| NATIONAL Fits: 2.0L L4 | 711053 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear Outer | View on Amazon |
| WJB / INMOTION PARTS Fits: 2.0L L4 | WS711053 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear Outer | View on Amazon |
This table covers the seals at the differential pinion yoke. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
2 Differential Pinion Seal parts for the 2016 Mitsubishi Lancer come from 2 brands — NATIONAL and WJB / INMOTION PARTS.
Part numbers include NATIONAL 711053 and WJB / INMOTION PARTS WS711053.
Differential Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| NATIONAL Fits: 2.0L L4 | 710396 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear | View on Amazon |
| WJB / INMOTION PARTS Fits: 2.0L L4 | WS710396 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear | View on Amazon |
This table covers the seals at the Differential. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
2 Differential Seal parts are listed for the 2016 Mitsubishi Lancer, from NATIONAL and WJB / INMOTION PARTS.
Listed part numbers: NATIONAL 710396 and WJB / INMOTION PARTS WS710396.
Transfer Case Output Shaft Repair Sleeve
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| BCA Fits: 2.0L L4 | NS99166 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear | View on Amazon |
| NATIONAL Fits: 2.0L L4 | 99166 | 🇺🇸 US 🇨🇦 CA | RearAWD | View on Amazon |
| WJB / INMOTION PARTS Fits: 2.0L L4 | WS99166 | 🇺🇸 US 🇨🇦 CA | Shaft Diameter Minimum (In): 1.647 In | View on Amazon |
This table covers the wear sleeves used to restore a Transfer Case Output Shaft seal surface.
3 Transfer Case Output Shaft Repair Sleeve parts for the 2016 Mitsubishi Lancer come from 3 brands — BCA, NATIONAL and WJB / INMOTION PARTS.
This group includes BCA NS99166, NATIONAL 99166 and WJB / INMOTION PARTS WS99166.
Transfer Case Output Shaft Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| NATIONAL Fits: 2.0L L4 | 711115 | 🇺🇸 US 🇨🇦 CA | RearAWD | View on Amazon |
| WJB / INMOTION PARTS Fits: 2.0L L4 | WS711115 | 🇺🇸 US 🇨🇦 CA | RearAWD | View on Amazon |
This table covers the seals at the Transfer Case Output Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
2 Transfer Case Output Shaft Seal parts for the 2016 Mitsubishi Lancer come from 2 brands — NATIONAL and WJB / INMOTION PARTS.
Listed part numbers: NATIONAL 711115 and WJB / INMOTION PARTS WS711115.
Buying Drivetrain Parts for a 2016 Mitsubishi Lancer
On this vehicle, the drivetrain system moves power from transmission to wheels through axles, CV joints, driveshafts, differentials and wheel-end hardware.
- Match the engine first. Every drivetrain part here is engine-specific; each row shows which engine(s) it fits.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace the differential or transfer-case fluid with any axle or seal job while everything is already open.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: CV Axle and CV Joint Boot .
Frequently Asked Questions
How many drivetrain parts fit the 2016 Mitsubishi Lancer?
Our catalog currently lists 36 drivetrain parts for the 2016 Mitsubishi Lancer across 9 subcategories and 11 brands, covering both the 2.0L L4 and the 2.4L L4. Each part is matched to the engine(s) it fits.
Do drivetrain parts differ between 2016 Mitsubishi Lancer engines?
Yes. Every drivetrain part on this page is engine-specific. Each row shows which engine(s) it fits — use the filter at the top to hide the rest. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.
What are the signs of drivetrain problems on a 2016 Mitsubishi Lancer?
Common symptoms include clicking in tight turns, a clunk when shifting between drive and reverse, vibration that builds with speed, or gear oil on the inside of a wheel. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, replace the differential or transfer-case fluid with any axle or seal job while everything is already open.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2016 Mitsubishi Lancer was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 2016 Mitsubishi Lancer?
First match the engine — each row shows which engine(s) the part fits. Then a torn CV boot caught early is a cheap boot kit; caught late it is a whole axle — inspect before deciding which to buy. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 2016 Mitsubishi Lancer
Drivetrain Parts for Other Mitsubishi Lancer Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.