2017 Mitsubishi Lancer Cooling System Parts

This table covers the engine coolants and antifreeze formulations specified for this cooling system. Typical signs include a rising temperature gauge, rusty or sludged coolant, or a heater that blows cold. Use the chemistry named in the notes. Mixing silicate, OAT and HOAT formulas can gel in the radiator. Read more

16 Coolant / Antifreeze parts for the 2017 Mitsubishi Lancer come from 7 brands — PRESTONE, PEAK, VALVOLINE and 4 other brands. The "Popular" part is FVP MV5050GAL. Every part fits both the 2.0L L4 and the 2.4L L4.

In the Compatible With All Colors grade, PRESTONE supplies 1 part: grouped under the catalog's "Compatible With All Colors" designation — the notes column spells out what sets them apart. A representative part number is PRESTONE AF3055.

The Economy section lists 4 options from FVP, PRESTONE, PEAK and 1 other brand — the catalog's value-priced group. FVP MV5050GAL is listed in this group.

In the Premium grade, PRESTONE and PEAK supply 5 parts: a step above OE specification in materials, tolerances or warranty terms. A representative part number is PRESTONE AF2100.

In the Standard Replacement grade, BECK/ARNLEY, AISIN, PEAK and 2 other brands supply 6 parts: built to original-equipment specification. A representative part number is AISIN ACB003.

This table covers the seals at the Coolant Hose / Pipe. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Coolant Hose / Pipe Seal parts are listed for the 2017 Mitsubishi Lancer, from AJUSA, ELRING and MAHLE / CLEVITE. 2 parts fit every engine; the other 1 is engine-specific.

Part numbers include AJUSA 16060600, ELRING 455800 and MAHLE / CLEVITE B45797.

This table covers the Coolant Hose Connector flanges. Read more

This group shows a single part: FOUR SEASONS 86377.

This table covers the overflow / expansion tanks that hold extra coolant. Read more

3 Coolant Reservoir parts are listed for the 2017 Mitsubishi Lancer, from DORMAN, GPD and TECHPRO. All of them fit every engine offered in the 2017 Lancer.

Listed part numbers: DORMAN 603234, GPD 2411215 and TECHPRO MI3014108.

This table covers the caps on the overflow / expansion tank. Typical signs include a leak at the neck, a cap that will not hold pressure, or a missing tether. Match the pressure rating or thread in the notes — radiator, reservoir and fuel caps are not interchangeable. Read more

3 Coolant Reservoir Cap parts are listed for the 2017 Mitsubishi Lancer, from CALORSTAT, DORMAN and MOTORAD. All of them fit every engine offered in the 2017 Lancer.

Part numbers include CALORSTAT RC0206, DORMAN 54242 and MOTORAD T117.

This table covers the adapters used to pressure-test this cooling system. Read more

3 Cooling System Tester Adapter parts for the 2017 Mitsubishi Lancer come from 2 brands — MOTORAD and STANT. Every part fits both the 2.0L L4 and the 2.4L L4.

Part numbers include MOTORAD 3121, MOTORAD 3122 and STANT 12021.

This table covers the radiators that dump engine heat to airflow through the core. Typical signs include overheating in traffic, a wet core, or coolant that disappears with no puddle. Replace the cap if it cannot hold the rated pressure, and bleed the system after the swap. Read more

5 Radiator parts for the 2017 Mitsubishi Lancer come from 5 brands — TYC, AGILITY, DENSO and 2 other brands. The "Popular" part is TYC 13525. Every part fits both the 2.0L L4 and the 2.4L L4.

Part numbers include TYC 13525, AGILITY 8013525 and DENSO 2219539, among others listed above.

This table covers the caps that hold system pressure at the radiator or reservoir neck. Typical signs include a leak at the neck, a cap that will not hold pressure, or a missing tether. Match the pressure rating or thread in the notes — radiator, reservoir and fuel caps are not interchangeable. Read more

6 Radiator Cap parts for the 2017 Mitsubishi Lancer come from 4 brands — CALORSTAT, MOTORAD, SKP and 1 other brand. The "Popular" part is MOTORAD T16R. Every part fits both the 2.0L L4 and the 2.4L L4.

In the Locking Replacement grade, CALORSTAT and MOTORAD supply 2 parts: grouped under the catalog's "Locking Replacement" designation — the notes column spells out what sets them apart. A representative part number is CALORSTAT RC0212.

Standard Replacement: 4 parts, from MOTORAD, SKP, CALORSTAT and 1 other brand. A representative part number is MOTORAD T16R.

This group includes MOTORAD T16R, CALORSTAT RC0212 and MOTORAD ST16R and the remaining parts above.

This table covers the fan assemblies (and clutches, where listed) that pull air through the radiator. Read more

9 Radiator Fan Assembly parts are listed for the 2017 Mitsubishi Lancer, from GPD, TECHPRO, ULTRA-POWER and 6 other brands. TYC 622450 carries the "Popular" badge. All of them fit every engine offered in the 2017 Lancer.

Economy: 3 parts, from GPD, TECHPRO and ULTRA-POWER. A representative part number is GPD 2811720.

The Standard Replacement section: 6 options from TYC, ACKOJA, AGILITY and 3 other brands. TYC 622450 is listed in this group.

This group includes TYC 622450, GPD 2811720 and TECHPRO MI3115139 and the remaining parts above.

This table covers the upper, lower and connecting hoses between radiator, engine and reservoir. Typical signs include swelling, cracks, a soft spot, or a leak at a clamp. Replace adjacent aged hoses while the system is drained — they share the same heat cycle. Read more

9 Radiator Hose parts are listed for the 2017 Mitsubishi Lancer, from GATES, DAYCO and CONTINENTAL. DAYCO 72109 carries the "Popular" badge. 8 parts fit every engine; the other 1 is engine-specific.

The Standard Replacement section: 8 options from GATES, DAYCO and CONTINENTAL. DAYCO 72109 is listed in this group.

The Universal Hose (Straight, Bulk) section lists 1 option from DAYCO — grouped under the catalog's "Universal Hose (Straight, Bulk)" designation — the notes column spells out what sets them apart. DAYCO 76138 is listed in this group.

This group includes DAYCO 72109, GATES 23619 and CONTINENTAL 66488 and the remaining parts above.

This table covers the senders that report coolant temperature to the gauge or ECU. Typical signs include a gauge that sits on empty or overheat, or a lamp that does not match what the engine is doing. Rule out the cluster and the wiring before replacing the sender. Read more

8 Temperature Sender / Sensor parts for the 2017 Mitsubishi Lancer come from 7 brands — WELLS, CALORSTAT, GPD and 4 other brands. The "Popular" part is NTK EF0097. Every part fits both the 2.0L L4 and the 2.4L L4.

The Economy section: 3 options from CALORSTAT, GPD and HOLSTEIN. CALORSTAT WS3041 is listed in this group.

Standard Replacement: 5 parts, from WELLS, NTK, STANDARD MOTOR PRODUCTS and 1 other brand. A representative part number is NTK EF0097.

Part numbers include NTK EF0097, CALORSTAT WS3041 and GPD 1712618, among others listed above.

This table covers the thermostats that open the coolant circuit at the specified temperature. Typical signs include slow warm-up, a gauge that climbs in traffic, or heat that never quite arrives. Replace the housing gasket with the thermostat and bleed the system so a trapped air pocket does not cook the new part. Read more

4 Thermostat parts are listed for the 2017 Mitsubishi Lancer, from MOTORAD and CALORSTAT. All of them fit every engine offered in the 2017 Lancer.

Part numbers include CALORSTAT TH658787J, MOTORAD 762194 and MOTORAD 762192, among others listed above.

This table covers the seals at the thermostat housing and water outlet. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

7 Thermostat / Thermostat Housing / Water Outlet Seal parts for the 2017 Mitsubishi Lancer come from 4 brands — APEX, FEL-PRO, MAHLE / CLEVITE and 1 other brand. The "Popular" part is APEX AWO2307. Every part fits both the 2.0L L4 and the 2.4L L4.

Listed part numbers: APEX AWO2307, FEL-PRO 35877 and APEX AWO2290, plus the other parts above.

This table covers the housings and outlets the thermostat sits in. Read more

5 Thermostat Housing / Water Outlet parts are listed for the 2017 Mitsubishi Lancer, from GATES and MOTORAD. GATES CO34955 carries the "Popular" badge. All of them fit every engine offered in the 2017 Lancer.

This group includes GATES CO34955, GATES CO35093 and GATES CO35053 and the remaining parts above.

This table covers the pumps that circulate coolant through the block and radiator. Typical signs include coolant at the weep hole, pulley play, or a growl from the front of the engine. Replace the thermostat and refill with the specified coolant whenever the pump comes off. Read more

10 Water Pump parts are listed for the 2017 Mitsubishi Lancer, from GMB, BECK/ARNLEY, FVP and 6 other brands. GATES 42144 carries the "Popular" badge. 9 parts fit every engine; the other 1 is engine-specific.

Economy: 4 parts, from BECK/ARNLEY, FVP, US MOTOR WORKS and 1 other brand. A representative part number is BECK/ARNLEY 1312539.

The Standard Replacement section: 6 options from GMB, GATES, AISIN and 2 other brands. GATES 42144 is listed in this group.

This table covers the gaskets between the water pump and the block or housing. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Water Pump Gasket parts for the 2017 Mitsubishi Lancer come from 3 brands — FEL-PRO, APEX and MAHLE / CLEVITE. The "Popular" part is FEL-PRO 35813. 4 parts fit every engine; the other 1 is engine-specific.

This group includes FEL-PRO 35813, APEX AWP3215 and APEX AWO2307 and the remaining parts above.