2016 Mitsubishi Lancer Cooling System Parts

This table covers the engine coolants and antifreeze formulations specified for this cooling system. Typical signs include a rising temperature gauge, rusty or sludged coolant, or a heater that blows cold. Use the chemistry named in the notes. Mixing silicate, OAT and HOAT formulas can gel in the radiator. Read more

16 Coolant / Antifreeze parts are listed for the 2016 Mitsubishi Lancer, from PRESTONE, PEAK, VALVOLINE and 4 other brands. FVP MV5050GAL carries the "Popular" badge.

The Compatible With All Colors section lists 1 option from PRESTONE — grouped under the catalog's "Compatible With All Colors" designation — the notes column spells out what sets them apart. PRESTONE AF3055 is listed in this group.

In the Economy grade, FVP, PRESTONE, PEAK and 1 other brand supply 4 parts: the catalog's value-priced group. A representative part number is FVP MV5050GAL.

The Premium section lists 5 options from PRESTONE and PEAK — a step above OE specification in materials, tolerances or warranty terms. PRESTONE AF2100 is listed in this group.

The Standard Replacement section lists 6 options from BECK/ARNLEY, AISIN, PEAK and 2 other brands — built to original-equipment specification. AISIN ACB003 is listed in this group.

This table covers the seals at the Coolant Hose / Pipe. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Coolant Hose / Pipe Seal parts for the 2016 Mitsubishi Lancer come from 3 brands — AJUSA, ELRING and MAHLE / CLEVITE.

Part numbers include AJUSA 16060600, ELRING 455800 and MAHLE / CLEVITE B45797.

This table covers the Coolant Hose Connector flanges. Read more

One part is listed for the 2016 Mitsubishi Lancer — FOUR SEASONS 86377.

This table covers the overflow / expansion tanks that hold extra coolant. Read more

3 Coolant Reservoir parts for the 2016 Mitsubishi Lancer come from 3 brands — DORMAN, GPD and TECHPRO.

Part numbers include DORMAN 603234, GPD 2411215 and TECHPRO MI3014108.

This table covers the caps on the overflow / expansion tank. Typical signs include a leak at the neck, a cap that will not hold pressure, or a missing tether. Match the pressure rating or thread in the notes — radiator, reservoir and fuel caps are not interchangeable. Read more

3 Coolant Reservoir Cap parts for the 2016 Mitsubishi Lancer come from 3 brands — CALORSTAT, DORMAN and MOTORAD.

Part numbers include CALORSTAT RC0206, DORMAN 54242 and MOTORAD T117.

This table covers the adapters used to pressure-test this cooling system. Read more

MOTORAD supplies both parts for the 2016 Mitsubishi Lancer.

Part numbers include MOTORAD 3121 and MOTORAD 3122.

This table covers the radiators that dump engine heat to airflow through the core. Typical signs include overheating in traffic, a wet core, or coolant that disappears with no puddle. Replace the cap if it cannot hold the rated pressure, and bleed the system after the swap. Read more

5 Radiator parts are listed for the 2016 Mitsubishi Lancer, from TYC, AGILITY, DENSO and 2 other brands. TYC 13525 carries the "Popular" badge.

Part numbers include TYC 13525, AGILITY 8013525 and DENSO 2219539, among others listed above.

This table covers the caps that hold system pressure at the radiator or reservoir neck. Typical signs include a leak at the neck, a cap that will not hold pressure, or a missing tether. Match the pressure rating or thread in the notes — radiator, reservoir and fuel caps are not interchangeable. Read more

6 Radiator Cap parts are listed for the 2016 Mitsubishi Lancer, from MOTORAD, SKP, CALORSTAT and 1 other brand. MOTORAD T16R carries the "Popular" badge.

The Locking Replacement section lists 2 options from CALORSTAT and MOTORAD — grouped under the catalog's "Locking Replacement" designation — the notes column spells out what sets them apart. CALORSTAT RC0212 is listed in this group.

The Standard Replacement section: 4 options from SKP, MOTORAD and GATES. MOTORAD T16R is listed in this group.

Listed part numbers: MOTORAD T16R, CALORSTAT RC0212 and MOTORAD ST16R, plus the other parts above.

This table covers the fan assemblies (and clutches, where listed) that pull air through the radiator. Read more

5 Radiator Fan Assembly parts for the 2016 Mitsubishi Lancer come from 5 brands — TYC, AGILITY, FOUR SEASONS and 2 other brands. The "Popular" part is TYC 622450.

Part numbers include TYC 622450, AGILITY 6010058 and FOUR SEASONS 76255, among others listed above.

This table covers the upper, lower and connecting hoses between radiator, engine and reservoir. Typical signs include swelling, cracks, a soft spot, or a leak at a clamp. Replace adjacent aged hoses while the system is drained — they share the same heat cycle. Read more

8 Radiator Hose parts for the 2016 Mitsubishi Lancer come from 3 brands — GATES, DAYCO and CONTINENTAL. The "Popular" part is DAYCO 72109.

Standard Replacement: 7 parts, from GATES, CONTINENTAL and DAYCO. A representative part number is DAYCO 72109.

In the Universal Hose (Straight, Bulk) grade, DAYCO supplies 1 part: grouped under the catalog's "Universal Hose (Straight, Bulk)" designation — the notes column spells out what sets them apart. A representative part number is DAYCO 76138.

Part numbers include DAYCO 72109, GATES 23619 and CONTINENTAL 66488, among others listed above.

This table covers the senders that report coolant temperature to the gauge or ECU. Typical signs include a gauge that sits on empty or overheat, or a lamp that does not match what the engine is doing. Rule out the cluster and the wiring before replacing the sender. Read more

8 Temperature Sender / Sensor parts are listed for the 2016 Mitsubishi Lancer, from WELLS, CALORSTAT, GPD and 4 other brands. NTK EF0097 carries the "Popular" badge.

Economy: 3 parts, from CALORSTAT, GPD and HOLSTEIN. A representative part number is CALORSTAT WS3041.

The Standard Replacement section: 5 options from WELLS, NTK, STANDARD MOTOR PRODUCTS and 1 other brand. NTK EF0097 is listed in this group.

Listed part numbers: NTK EF0097, CALORSTAT WS3041 and GPD 1712618, plus the other parts above.

This table covers the thermostats that open the coolant circuit at the specified temperature. Typical signs include slow warm-up, a gauge that climbs in traffic, or heat that never quite arrives. Replace the housing gasket with the thermostat and bleed the system so a trapped air pocket does not cook the new part. Read more

4 Thermostat parts for the 2016 Mitsubishi Lancer come from 2 brands — MOTORAD and CALORSTAT.

Listed part numbers: CALORSTAT TH658787J, MOTORAD 762194 and MOTORAD 762192, plus the other parts above.

This table covers the seals at the thermostat housing and water outlet. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

6 Thermostat / Thermostat Housing / Water Outlet Seal parts are listed for the 2016 Mitsubishi Lancer, from APEX, FEL-PRO and MAHLE / CLEVITE. APEX AWO2307 carries the "Popular" badge.

Listed part numbers: APEX AWO2307, FEL-PRO 35877 and APEX AWO2290, plus the other parts above.

This table covers the housings and outlets the thermostat sits in. Read more

5 Thermostat Housing / Water Outlet parts for the 2016 Mitsubishi Lancer come from 2 brands — GATES and MOTORAD. The "Popular" part is GATES CO34955.

Part numbers include GATES CO34955, GATES CO35093 and GATES CO35053, among others listed above.

This table covers the pumps that circulate coolant through the block and radiator. Typical signs include coolant at the weep hole, pulley play, or a growl from the front of the engine. Replace the thermostat and refill with the specified coolant whenever the pump comes off. Read more

11 Water Pump parts for the 2016 Mitsubishi Lancer come from 9 brands — GMB, DAYCO, SKP and 6 other brands. The "Popular" part is SKP SK1207180.

The Economy section: 5 options from SKP, BECK/ARNLEY, FVP and 2 other brands. SKP SK1207180 is listed in this group.

Standard Replacement: 6 parts, from GMB, DAYCO, GATES and 1 other brand. A representative part number is GATES 42144.

This table covers the gaskets between the water pump and the block or housing. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

6 Water Pump Gasket parts are listed for the 2016 Mitsubishi Lancer, from FEL-PRO, APEX, MAHLE / CLEVITE and 1 other brand. FEL-PRO 35813 carries the "Popular" badge.

Part numbers include FEL-PRO 35813, MAHLE / CLEVITE K32192 and APEX AWP3215, among others listed above.