This page lists 10 ignition parts for the 1956 Morgan Plus 4, across 6 part types, covering both the 2.0L L4 and the 2.1L L4. Every part shows its brand, manufacturer part number and fitment notes.
On the 1956 Morgan Plus 4, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules. Most of the listed parts are Spark Plug (3 parts), Condenser / Capacitor (2 parts) and Ignition Conversion Kit (2 parts). The other 3 part types cover the remaining 3 parts.
The 1956 Morgan Plus 4 was sold with both the 2.0L L4 and the 2.1L L4. All 10 parts on this page fit every engine.
5 brands supply ignition parts for the 1956 Morgan Plus 4, led by STANDARD MOTOR PRODUCTS (5 parts), WELLS (2 parts) and ACDELCO (1 part), plus 2 more brands. Quality grades include Economy and Standard Replacement.
Each part number listed for the 1956 Morgan Plus 4 opens a page with every vehicle that part fits.
Condenser / Capacitor
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS Fits: all 1956 Plus 4 engines | LU206T | 🇺🇸 US | T-Series | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS Fits: all 1956 Plus 4 engines | LU206 | 🇺🇸 US | View on Amazon |
This table covers the capacitors used in this electrical or A/C circuit.
2 Condenser / Capacitor parts for the 1956 Morgan Plus 4 come from STANDARD MOTOR PRODUCTS. Every part fits both the 2.0L L4 and the 2.1L L4.
The Economy section lists 1 option from STANDARD MOTOR PRODUCTS — the catalog's value-priced group. STANDARD MOTOR PRODUCTS LU206T is listed in this group.
In the Standard Replacement grade, STANDARD MOTOR PRODUCTS supplies 1 part: built to original-equipment specification. A representative part number is STANDARD MOTOR PRODUCTS LU206.
This group includes STANDARD MOTOR PRODUCTS LU206T and STANDARD MOTOR PRODUCTS LU206.
Distributor Cap
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS Fits: all 1956 Plus 4 engines | LU401 | 🇺🇸 US | View on Amazon |
This table covers the Distributor caps. Typical signs include a leak at the neck, a cap that will not hold pressure, or a missing tether. Match the pressure rating or thread in the notes — radiator, reservoir and fuel caps are not interchangeable.
One part is listed for the 1956 Morgan Plus 4 — STANDARD MOTOR PRODUCTS LU401.
Distributor Rotor
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS Fits: all 1956 Plus 4 engines | LU300 | 🇺🇸 US | View on Amazon |
This table covers the Distributor rotors. Typical signs include shudder under braking, or a lip at the outer edge. Do not put new pads on a rotor that is below minimum thickness.
One part is listed for the 1956 Morgan Plus 4 — STANDARD MOTOR PRODUCTS LU300.
Ignition Breaker Points
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS Fits: all 1956 Plus 4 engines | LU1316 | 🇺🇸 US | View on Amazon |
This table covers the breaker points in a points-type distributor.
This group shows a single part: STANDARD MOTOR PRODUCTS LU1316.
Ignition Conversion Kit
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| WELLS Fits: all 1956 Plus 4 engines | 1A4160 | 🇺🇸 US | Lucas Distributor # DM2P4, Lobe Sensor Module, Early DM2 Distributor12 Volt | View on Amazon |
| WELLS Fits: all 1956 Plus 4 engines | 1A4232 | 🇺🇸 US | Lucas Distributor # DM2P4, Lobe Sensor Module12 Volt | View on Amazon |
This table covers the Ignition Conversion kits.
WELLS supplies both parts for the 1956 Morgan Plus 4. All of them fit every engine offered in the 1956 Plus 4.
This group includes WELLS 1A4160 and WELLS 1A4232.
Spark Plug
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ACDELCO Fits: all 1956 Plus 4 engines | R44F | 🇺🇸 US 🇨🇦 CA | ProfessionalConventional | View on Amazon |
| AUTOLITE Fits: all 1956 Plus 4 engines | 275 | 🇺🇸 US | Copper Non-ResistorPre-Set Gap: 0.025" | View on Amazon |
| CHAMPION Fits: all 1956 Plus 4 engines | 896 | 🇺🇸 US | Copper Plus | View on Amazon |
This table covers the spark plugs for this engine. Typical signs include misfire under load, rough idle, or a flashing check-engine light. Verify the gap even on pre-gapped plugs, and replace coil boots that come off a high-mileage engine.
3 Spark Plug parts are listed for the 1956 Morgan Plus 4, from ACDELCO, AUTOLITE and CHAMPION. All of them fit every engine offered in the 1956 Plus 4.
Listed part numbers: ACDELCO R44F, AUTOLITE 275 and CHAMPION 896.
Buying Ignition Parts for a 1956 Morgan Plus 4
On this vehicle, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules.
- You do not need to pick an engine: every ignition part on this page fits both the 2.0L L4 and the 2.1L L4.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Spark Plug and Condenser / Capacitor .
Frequently Asked Questions
How many ignition parts fit the 1956 Morgan Plus 4?
Our catalog currently lists 10 ignition parts for the 1956 Morgan Plus 4 across 6 subcategories and 5 brands, covering both the 2.0L L4 and the 2.1L L4. Each part is matched to the engine(s) it fits.
Do ignition parts differ between 1956 Morgan Plus 4 engines?
No. On this page every ignition part fits both the 2.0L L4 and the 2.1L L4. You do not need to pick an engine to choose the right row — use the notes for position and trim.
What are the signs of ignition problems on a 1956 Morgan Plus 4?
Common symptoms include misfires under load, rough idle, flashing check-engine light, or poor starting in damp weather. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What spark-plug gap is listed for the 1956 Morgan Plus 4?
Notes on this page include pre-set gaps of 0.025" and 0.030". Still verify against spec — even “pre-gapped” plugs should be checked before they go in.
What should I replace at the same time?
Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1956 Morgan Plus 4 was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 1956 Morgan Plus 4?
Every part on this page already fits both the 2.0L L4 and the 2.1L L4. Then gap matters even on “pre-gapped” plugs — verify against spec, and replace coil boots when they come off a high-mileage engine. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 1956 Morgan Plus 4
Ignition Parts for Other Morgan Plus 4 Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.