1966 Morgan Plus 4 Ignition Parts

Engine:

Showing parts for every engine. Select an engine to see only what fits.

27 Ignition parts are listed for the 1966 Morgan Plus 4, in 5 part types, covering both the 1.5L L4 and the 2.1L L4. Each one has a brand, a manufacturer part number and notes that say where it fits.

On the 1966 Morgan Plus 4, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules. 25 parts of the 27 listed are Spark Plug (15 parts), Ignition Coil (8 parts) and Ignition Conversion Kit (2 parts). The other 2 part types cover the remaining 2 parts.

Distributor Rotor

Brand Part Number Markets Notes Buy
STANDARD MOTOR PRODUCTS Fits: all 1966 Plus 4 engines LU300
🇺🇸 US
View on
Amazon

This table covers the Distributor rotors. Typical signs include shudder under braking, or a lip at the outer edge. Do not put new pads on a rotor that is below minimum thickness.

Ignition Breaker Points

Brand Part Number Markets Notes Buy
STANDARD MOTOR PRODUCTS Fits: all 1966 Plus 4 engines LU1617P
🇺🇸 US
View on
Amazon

This table covers the breaker points in a points-type distributor.

Ignition Coil

Economy

Brand Part Number Markets Notes Buy
STANDARD MOTOR PRODUCTS Popular Fits: all 1966 Plus 4 engines UC15T
🇺🇸 US 🇨🇦 CA
T-Series
View on
Amazon
FVP Fits: all 1966 Plus 4 engines UC15F
🇺🇸 US 🇨🇦 CA
Alternate Replacement Part
View on
Amazon
HOLSTEIN Fits: all 1966 Plus 4 engines 2IGC0058
🇺🇸 US 🇨🇦 CA
View on
Amazon
SKP Fits: all 1966 Plus 4 engines SKUF3T
🇺🇸 US
Coil Pack
View on
Amazon
SPECTRA PREMIUM Fits: all 1966 Plus 4 engines C654
🇺🇸 US
Pack
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
STANDARD MOTOR PRODUCTS Popular Fits: all 1966 Plus 4 engines UC15
🇺🇸 US 🇨🇦 CA
View on
Amazon
UNITED MOTOR PRODUCTS Fits: all 1966 Plus 4 engines C15
🇺🇸 US 🇨🇦 CA
View on
Amazon
WELLS Fits: all 1966 Plus 4 engines 5C1019
🇺🇸 US 🇨🇦 CA
Used on most import products with 12 Volt system with Internal resistorUniversal 12 Volt Coil
View on
Amazon

This table covers the coils that fire each spark plug. Typical signs include a misfire that follows one cylinder, a snap in damp weather, or a coil that is swollen or cracked. Swap a suspect coil with a neighbor to confirm, then replace boots that tore on the way off.

Ignition Conversion Kit

Brand Part Number Markets Notes Buy
WELLS Fits: all 1966 Plus 4 engines 1A4222
🇺🇸 US
with Lucas Distributor # 25D412 Volt
Fitment notes — WELLS 1A4222
with Lucas Distributor # 25D412 Voltwith Positive Ground
View on
Amazon
WELLS Fits: 2.1L L4 1A4147
🇺🇸 US
with Lucas Distributor # 35D812 Volt
Fitment notes — WELLS 1A4147
with Lucas Distributor # 35D812 VoltNegative Ground
View on
Amazon

This table covers the Ignition Conversion kits.

Spark Plug

Summary: Notes include pre-set gaps of 0.025", 0.026", 0.030", 0.032", 0.035", 0.04", 0.041" and 0.044". Replacement brands in this table include CHAMPION, ACDELCO and AUTOLITE.

Copper / Nickel

Brand Part Number Markets Notes Buy
ACDELCO Popular Fits: 1.5L L4 R42XLS
🇺🇸 US 🇨🇦 CA
ProfessionalConventional
Fitment notes — ACDELCO R42XLS
ProfessionalConventionalPre-Set Gap: 0.035"
Original Equipment-Recommended Gap: .025
View on
Amazon
ACDELCO Popular Fits: 2.1L L4 R43XLS
🇺🇸 US 🇨🇦 CA
ProfessionalConventional
Fitment notes — ACDELCO R43XLS
ProfessionalConventionalPre-Set Gap: 0.030"
Original Equipment-Recommended Gap: .025
View on
Amazon
CHAMPION Popular Fits: 1.5L L4 120
🇺🇸 US
Copper PlusPre-Set Gap: 0.026"
Fitment notes — CHAMPION 120
Copper PlusPre-Set Gap: 0.026"
OE-Recommended Gap: 0.025"Non-Resistor Plug
View on
Amazon
CHAMPION Fits: 1.5L L4 123
🇺🇸 US
Copper PlusPre-Set Gap: 0.025"
Fitment notes — CHAMPION 123
Copper PlusPre-Set Gap: 0.025"
OE-Recommended Gap: 0.025"Resistor Plug
View on
Amazon
CHAMPION Fits: 2.1L L4 327
🇺🇸 US
Copper PlusPre-Set Gap: 0.04"
Fitment notes — CHAMPION 327
Copper PlusPre-Set Gap: 0.04"
Resistor TypeOE-Recommended Gap: 0.025"
View on
Amazon
CHAMPION Fits: 2.1L L4 312
🇺🇸 US
Copper PlusPre-Set Gap: 0.025"
Fitment notes — CHAMPION 312
Copper PlusPre-Set Gap: 0.025"
Non-Resistor TypeOE-Recommended Gap: 0.025"
View on
Amazon
CHAMPION Fits: 2.1L L4 3121
🇺🇸 US
Copper Plus
Fitment notes — CHAMPION 3121
Copper Plus
Non-Resistor TypeOE-Recommended Gap: 0.025"
View on
Amazon
MOTORCRAFT Fits: 2.1L L4 SP436AX
🇺🇸 US
Copper
Fitment notes — MOTORCRAFT SP436AX
Copper
OE Style.025"/0.6mm
View on
Amazon

Double Platinum (lasts up to 3x longer than Copper / Nickel)

Brand Part Number Markets Notes Buy
ACDELCO Fits: 1.5L L4 41804
🇺🇸 US 🇨🇦 CA
ProfessionalDouble Platinum
Fitment notes — ACDELCO 41804
ProfessionalDouble PlatinumPre-Set Gap: 0.035"
OE-Recommended Gap: 0.025"
View on
Amazon
AUTOLITE Fits: 2.1L L4 APP64
🇺🇸 US
Double PlatinumHex Size: 13/16 In
Fitment notes — AUTOLITE APP64
Double PlatinumHex Size: 13/16 InPre-Set Gap: 0.044"
Gap .025 (In) 0.6 (mm)
View on
Amazon

Iridium (lasts up to 4x longer than Copper / Nickel)

Brand Part Number Markets Notes Buy
AUTOLITE Popular Fits: 2.1L L4 XP64
🇺🇸 US
Display PackQTY2
Fitment notes — AUTOLITE XP64
Display PackQTY2Ground Electrode Tip Design: Taper CutIridium XPPre-Set Gap: 0.044"
Gap .025 (In) 0.6 (mm)
View on
Amazon
AUTOLITE Fits: 1.5L L4 XP63
🇺🇸 US
Iridium XPDisplay Pack
Fitment notes — AUTOLITE XP63
Iridium XPDisplay PackQTY2Pre-Set Gap: 0.032"
Gap .025 (In) 0.6 (mm)
View on
Amazon
SKP Fits: 1.5L L4 SP1041
🇺🇸 US
Tapered Ground Electrode with Platinum Chip
Fitment notes — SKP SP1041
Tapered Ground Electrode with Platinum Chip
Gap: .025
View on
Amazon
SKP Fits: 2.1L L4 SP1042
🇺🇸 US
Tapered Ground Electrode with Platinum Chip
Fitment notes — SKP SP1042
Tapered Ground Electrode with Platinum Chip
Gap: .025
View on
Amazon

Platinum (lasts up to 2x longer than Copper / Nickel)

Brand Part Number Markets Notes Buy
ACDELCO Fits: 1.5L L4 4
🇺🇸 US 🇨🇦 CA
ProfessionalRapidfire
Fitment notes — ACDELCO 4
ProfessionalRapidfirePre-Set Gap: 0.041"
OE-Recommended Gap: 0.025" (IN)
View on
Amazon

This table covers the spark plugs for this engine. Typical signs include misfire under load, rough idle, or a flashing check-engine light. Verify the gap even on pre-gapped plugs, and replace coil boots that come off a high-mileage engine.

Buying Ignition Parts for a 1966 Morgan Plus 4

On this vehicle, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules.

  • Match the engine first. Some ignition parts fit every engine; others are engine-specific. Each row shows which engine(s) it fits.
  • Read the notes on each row for position, trim and spec qualifiers before you order.
  • Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
  • Cross-reference the manufacturer part number against your old part or a service-manual listing.

Start with the largest groups on this page: Spark Plug and Ignition Coil .

Frequently Asked Questions

How many ignition parts fit the 1966 Morgan Plus 4?

Our catalog currently lists 27 ignition parts for the 1966 Morgan Plus 4 across 5 subcategories and 11 brands, covering both the 1.5L L4 and the 2.1L L4. Each part is matched to the engine(s) it fits.

Do ignition parts differ between 1966 Morgan Plus 4 engines?

Some do. 11 parts fit every engine; the other 16 are engine-specific. Each row (and the filter at the top) shows which. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.

What are the signs of ignition problems on a 1966 Morgan Plus 4?

Common symptoms include misfires under load, rough idle, flashing check-engine light, or poor starting in damp weather. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.

What spark-plug gap is listed for the 1966 Morgan Plus 4?

Notes on this page include pre-set gaps of 0.025", 0.026", 0.030", 0.032", 0.035", 0.04", 0.041" and 0.044". Still verify against spec — even “pre-gapped” plugs should be checked before they go in.

What should I replace at the same time?

Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.

What do the market flags (US, CA, MX) on each part mean?

They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1966 Morgan Plus 4 was originally sold in the US, the safest choice is a part marked for the US market.

How do I make sure a part fits my 1966 Morgan Plus 4?

First match the engine — each row shows which engine(s) the part fits. Then gap matters even on “pre-gapped” plugs — verify against spec, and replace coil boots when they come off a high-mileage engine. The notes column carries position and trim qualifiers where they apply.

Other Parts for the 1966 Morgan Plus 4

Ignition Parts for Other Morgan Plus 4 Years

Switch vehicle or jump to a subcategory

Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.