1950 Morris Minor Ignition Parts

Engine:
919cc L4

11 Ignition parts are listed for the 1950 Morris Minor, in 3 part types, covering the 919cc L4 engine. Each one has a brand, a manufacturer part number and notes that say where it fits.

On the 1950 Morris Minor, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules. All 11 listed parts are Spark Plug (6 parts), Ignition Coil (4 parts) and Ignition Conversion Kit (1 part).

Ignition Coil

Economy

Brand Part Number Markets Notes Buy
FVP UC15F
🇺🇸 US
with 12 Volt Systemwithout External Resistor
View on
Amazon
STANDARD MOTOR PRODUCTS UC15T
🇺🇸 US
T-Series
Fitment notes — STANDARD MOTOR PRODUCTS UC15T
T-Series
with 12 Volt Systemwithout External Resistor
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
STANDARD MOTOR PRODUCTS UC15
🇺🇸 US
with 12 Volt Systemwithout External Resistor
View on
Amazon
WELLS 5C1019
🇺🇸 US
Used on most import products with 12 Volt system with Internal resistorUniversal 12 Volt Coil
Fitment notes — WELLS 5C1019
Used on most import products with 12 Volt system with Internal resistorUniversal 12 Volt Coil
12 Voltwith Lucas Ignition
View on
Amazon

This table covers the coils that fire each spark plug. Typical signs include a misfire that follows one cylinder, a snap in damp weather, or a coil that is swollen or cracked. Swap a suspect coil with a neighbor to confirm, then replace boots that tore on the way off.

Ignition Conversion Kit

Brand Part Number Markets Notes Buy
WELLS 1A4224
🇺🇸 US
Lucas Distributor # DKH4A, DKYH4A, DKY4A, Lobe Sensor Module12 Volt
Fitment notes — WELLS 1A4224
Lucas Distributor # DKH4A, DKYH4A, DKY4A, Lobe Sensor Module12 Voltwith Positive Ground
View on
Amazon

This table covers the Ignition Conversion kits.

Spark Plug

Summary: Notes include pre-set gaps of 0.025", 0.035" and 0.039". Replacement brands in this table include MOTORCRAFT, AUTOLITE and ACDELCO.

Copper / Nickel

Brand Part Number Markets Notes Buy
ACDELCO Popular R44XLS
🇺🇸 US 🇨🇦 CA
ProfessionalConventional
Fitment notes — ACDELCO R44XLS
ProfessionalConventionalPre-Set Gap: 0.039"
Original Equipment-Recommended Gap: .025
View on
Amazon
MOTORCRAFT Popular SP416A
🇺🇸 US
Copper
Fitment notes — MOTORCRAFT SP416A
Copper
OE Style.025"/0.6mm
View on
Amazon
CHAMPION 896
🇺🇸 US
Copper Plus
Fitment notes — CHAMPION 896
Copper Plus
OE-Recommended Gap: 0.025"
View on
Amazon
MOTORCRAFT SP416X
🇺🇸 US
Copper
Fitment notes — MOTORCRAFT SP416X
Copper
OE Style.025"/0.6mm
View on
Amazon

Double Platinum (lasts up to 3x longer than Copper / Nickel)

Brand Part Number Markets Notes Buy
AUTOLITE APP65
🇺🇸 US
Double PlatinumPre-Set Gap: 0.035"
Fitment notes — AUTOLITE APP65
Double PlatinumPre-Set Gap: 0.035"
Gap .025 (In) 0.6 (mm)
View on
Amazon

Platinum (lasts up to 2x longer than Copper / Nickel)

Brand Part Number Markets Notes Buy
AUTOLITE AP65
🇺🇸 US
Platinum Spark PlugDisplay Pack
Fitment notes — AUTOLITE AP65
Platinum Spark PlugDisplay PackQTY2Pre-Set Gap: 0.035"
Gap .025 (In) 0.6 (mm)
View on
Amazon

This table covers the spark plugs for this engine. Typical signs include misfire under load, rough idle, or a flashing check-engine light. Verify the gap even on pre-gapped plugs, and replace coil boots that come off a high-mileage engine.

Buying Ignition Parts for a 1950 Morris Minor

On this vehicle, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules.

  • Confirm you have the 919cc L4 engine — every part on this page is matched to it.
  • Read the notes on each row for position, trim and spec qualifiers before you order.
  • Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
  • Cross-reference the manufacturer part number against your old part or a service-manual listing.

Start with the largest groups on this page: Spark Plug and Ignition Coil .

Frequently Asked Questions

How many ignition parts fit the 1950 Morris Minor?

Our catalog currently lists 11 ignition parts for the 1950 Morris Minor across 3 subcategories and 7 brands, covering the 919cc L4 engine. Each part is matched to the engine(s) it fits.

What are the signs of ignition problems on a 1950 Morris Minor?

Common symptoms include misfires under load, rough idle, flashing check-engine light, or poor starting in damp weather. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.

What spark-plug gap is listed for the 1950 Morris Minor?

Notes on this page include pre-set gaps of 0.025", 0.035" and 0.039". Still verify against spec — even “pre-gapped” plugs should be checked before they go in.

What should I replace at the same time?

Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.

What do the market flags (US, CA, MX) on each part mean?

They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1950 Morris Minor was originally sold in the US, the safest choice is a part marked for the US market.

How do I make sure a part fits my 1950 Morris Minor?

Every part on this page is matched to the 919cc L4 engine. Then gap matters even on “pre-gapped” plugs — verify against spec, and replace coil boots when they come off a high-mileage engine. The notes column carries position and trim qualifiers where they apply.

Other Parts for the 1950 Morris Minor

Ignition Parts for Other Morris Minor Years

Switch vehicle or jump to a subcategory

Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.