2011 Nissan Cube Cooling System Parts

This table covers the engine coolants and antifreeze formulations specified for this cooling system. Typical signs include a rising temperature gauge, rusty or sludged coolant, or a heater that blows cold. Use the chemistry named in the notes. Mixing silicate, OAT and HOAT formulas can gel in the radiator. Read more

16 Coolant / Antifreeze parts are listed for the 2011 Nissan Cube, from PRESTONE, PEAK, VALVOLINE and 4 other brands. FVP MV5050GAL carries the "Popular" badge.

The Compatible With All Colors section lists 1 option from PRESTONE — grouped under the catalog's "Compatible With All Colors" designation — the notes column spells out what sets them apart. PRESTONE AF3055 is listed in this group.

In the Economy grade, FVP, PRESTONE, PEAK and 1 other brand supply 4 parts: the catalog's value-priced group. A representative part number is FVP MV5050GAL.

The Premium section lists 5 options from PRESTONE and PEAK — a step above OE specification in materials, tolerances or warranty terms. PRESTONE AF2100 is listed in this group.

The Standard Replacement section lists 6 options from BECK/ARNLEY, VALVOLINE, AISIN and 2 other brands — built to original-equipment specification. VALVOLINE 861398 is listed in this group.

This table covers the Coolant Hose Connector flanges. Read more

One part is listed for the 2011 Nissan Cube — FOUR SEASONS 86188.

This table covers the overflow / expansion tanks that hold extra coolant. Read more

This group shows a single part: TECHPRO NI3014116.

This table covers the caps on the overflow / expansion tank. Typical signs include a leak at the neck, a cap that will not hold pressure, or a missing tether. Match the pressure rating or thread in the notes — radiator, reservoir and fuel caps are not interchangeable. Read more

4 Coolant Reservoir Cap parts for the 2011 Nissan Cube come from 4 brands — AUTOTECNICA, CALORSTAT, DORMAN and 1 other brand.

Part numbers include AUTOTECNICA NI0716746, CALORSTAT RC0184 and DORMAN 54245, among others listed above.

This table covers the Cooling Fan control modules. Read more

3 Cooling Fan Control Module parts for the 2011 Nissan Cube come from US MOTOR WORKS.

Part numbers include US MOTOR WORKS 16749, US MOTOR WORKS 16789 and US MOTOR WORKS 16795.

This table covers the adapters used to pressure-test this cooling system. Read more

3 Cooling System Tester Adapter parts are listed for the 2011 Nissan Cube, from MOTORAD and STANT.

This group includes MOTORAD 3121, MOTORAD 3122 and STANT 12021.

This table covers the radiators that dump engine heat to airflow through the core. Typical signs include overheating in traffic, a wet core, or coolant that disappears with no puddle. Replace the cap if it cannot hold the rated pressure, and bleed the system after the swap. Read more

10 Radiator parts are listed for the 2011 Nissan Cube, from CSF, KOYORAD, AGILITY and 7 other brands. CSF 3432 carries the "Popular" badge.

This table covers the caps that hold system pressure at the radiator or reservoir neck. Typical signs include a leak at the neck, a cap that will not hold pressure, or a missing tether. Match the pressure rating or thread in the notes — radiator, reservoir and fuel caps are not interchangeable. Read more

7 Radiator Cap parts are listed for the 2011 Nissan Cube, from CALORSTAT, MOTORAD, SKP and 2 other brands. MOTORAD T13R carries the "Popular" badge.

The Locking Replacement section lists 2 options from CALORSTAT and MOTORAD — grouped under the catalog's "Locking Replacement" designation — the notes column spells out what sets them apart. CALORSTAT RC0213 is listed in this group.

The Standard Replacement section: 5 options from MOTORAD, SKP, CALORSTAT and 2 other brands. MOTORAD T13R is listed in this group.

Part numbers include MOTORAD T13R, CALORSTAT RC0213 and MOTORAD ST13R, among others listed above.

This table covers the fan assemblies (and clutches, where listed) that pull air through the radiator. Read more

5 Radiator Fan Assembly parts for the 2011 Nissan Cube come from 4 brands — TECHPRO, GPD, TYC and 1 other brand. The "Popular" part is TYC 622470.

The Economy section: 3 options from TECHPRO and GPD. GPD 2811722 is listed in this group.

Standard Replacement: 2 parts, from TYC and UAC. A representative part number is TYC 622470.

Part numbers include TYC 622470, GPD 2811722 and TECHPRO NI3115140, among others listed above.

This table covers the upper, lower and connecting hoses between radiator, engine and reservoir. Typical signs include swelling, cracks, a soft spot, or a leak at a clamp. Replace adjacent aged hoses while the system is drained — they share the same heat cycle. Read more

7 Radiator Hose parts for the 2011 Nissan Cube come from 4 brands — DAYCO, CONTINENTAL, GATES and 1 other brand. The "Popular" part is DAYCO 72150.

Listed part numbers: DAYCO 72150, DAYCO 72509 and ACDELCO 22660M, plus the other parts above.

This table covers the Radiator Mount bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

3 Radiator Mount Bushing parts for the 2011 Nissan Cube come from 3 brands — DORMAN, SKP and ULTRA-POWER.

This group includes DORMAN 926274 and SKP SK926274 and the remaining parts above.

This table covers the senders that report coolant temperature to the gauge or ECU. Typical signs include a gauge that sits on empty or overheat, or a lamp that does not match what the engine is doing. Rule out the cluster and the wiring before replacing the sender. Read more

18 Temperature Sender / Sensor parts are listed for the 2011 Nissan Cube, from STANDARD MOTOR PRODUCTS, VEMO, WALKER PRODUCTS and 11 other brands. HOLSTEIN 2CTS0026 carries the "Popular" badge.

Economy: 7 parts, from VEMO, HOLSTEIN, GPD and 3 other brands. A representative part number is HOLSTEIN 2CTS0026.

In the Full Service Kit grade, WALKER PRODUCTS supplies 1 part: grouped under the catalog's "Full Service Kit" designation — the notes column spells out what sets them apart. A representative part number is WALKER PRODUCTS 21191031.

The Standard Replacement section: 10 options from STANDARD MOTOR PRODUCTS, BECK/ARNLEY, HELLA and 6 other brands. BECK/ARNLEY 1580606 is listed in this group.

This table covers the thermostats that open the coolant circuit at the specified temperature. Typical signs include slow warm-up, a gauge that climbs in traffic, or heat that never quite arrives. Replace the housing gasket with the thermostat and bleed the system so a trapped air pocket does not cook the new part. Read more

20 Thermostat parts for the 2011 Nissan Cube come from 10 brands — MOTORAD, JAPANESE OE, AISIN and 7 other brands. The "Popular" part is MOTORAD 7457205.

The Economy section: 1 option from VEMO. VEMO V46991374 is listed in this group.

Premium: 1 part, from MOTORAD. A representative part number is MOTORAD 7457205.

Standard Replacement: 18 parts, from MOTORAD, JAPANESE OE, AISIN and 6 other brands. A representative part number is JAPANESE OE W52NA95.

This table covers the seals at the thermostat housing and water outlet. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

20 Thermostat / Thermostat Housing / Water Outlet Seal parts are listed for the 2011 Nissan Cube, from MAHLE / CLEVITE, FEL-PRO, VICTOR REINZ and 3 other brands. APEX AWO2047 carries the "Popular" badge.

This table covers the housings and outlets the thermostat sits in. Read more

2 Thermostat Housing / Water Outlet parts for the 2011 Nissan Cube come from 2 brands — BECK/ARNLEY and MOTORAD.

Part numbers include BECK/ARNLEY 1470076 and MOTORAD CH8751.

This table covers the pumps that circulate coolant through the block and radiator. Typical signs include coolant at the weep hole, pulley play, or a growl from the front of the engine. Replace the thermostat and refill with the specified coolant whenever the pump comes off. Read more

10 Water Pump parts for the 2011 Nissan Cube come from 10 brands — BECK/ARNLEY, FVP, US MOTOR WORKS and 7 other brands. The "Popular" part is AISIN WPN707.

The Economy section: 4 options from BECK/ARNLEY, FVP, US MOTOR WORKS and 1 other brand. BECK/ARNLEY 1312368 is listed in this group.

Standard Replacement: 6 parts, from AISIN, GATES, DAYCO and 3 other brands. A representative part number is AISIN WPN707.

This table covers the gaskets between the water pump and the block or housing. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Water Pump Gasket parts are listed for the 2011 Nissan Cube, from FEL-PRO, APEX, BECK/ARNLEY and 2 other brands. FEL-PRO 35883 carries the "Popular" badge.

Listed part numbers: FEL-PRO 35883, APEX AWP3228 and BECK/ARNLEY 0394199, plus the other parts above.