2011 Nissan Cube Engine Parts

This table covers the chains that drive the balance shafts. Read more

This group shows a single part: PREFERRED COMPONENTS INC C763.

This table covers the Balance Shaft Chain tensioners. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

One part is listed for the 2011 Nissan Cube — PREFERRED COMPONENTS INC T66221.

This table covers the Balance Shaft sprockets. Read more

3 Balance Shaft Sprocket parts for the 2011 Nissan Cube come from 3 brands — INA, MELLING and PREFERRED COMPONENTS INC.

This group includes INA ZSS945, MELLING S945 and PREFERRED COMPONENTS INC G56320C.

This table covers the connecting rods between each piston and the crankshaft. Read more

This group shows a single part: TOPLINE CRD43.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

6 Connecting Rod Bearing parts for the 2011 Nissan Cube come from 5 brands — MAHLE / CLEVITE, ENGINETECH, ITM ENGINE COMPONENTS and 2 other brands. The "Popular" part is ENGINETECH BB1049.

This group includes ENGINETECH BB1049, MAHLE / CLEVITE CB1919A4 and ITM ENGINE COMPONENTS 4B1737 and the remaining parts above.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

6 Conversion / Lower Gasket Set parts for the 2011 Nissan Cube come from 6 brands — FEL-PRO, MAHLE / CLEVITE, AJUSA and 3 other brands. The "Popular" part is FEL-PRO CS26338.

Part numbers include FEL-PRO CS26338, MAHLE / CLEVITE CS54692 and AJUSA 54157700, among others listed above.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

5 Crankshaft Main Bearing parts are listed for the 2011 Nissan Cube, from TOPLINE, MAHLE / CLEVITE, ITM ENGINE COMPONENTS and 1 other brand. MAHLE / CLEVITE MS2301A carries the "Popular" badge.

Part numbers include MAHLE / CLEVITE MS2301A, ITM ENGINE COMPONENTS 4M9219 and KING ENGINE BEARINGS MB5781SI, among others listed above.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

3 Crankshaft Repair Sleeve parts are listed for the 2011 Nissan Cube, from NATIONAL, SCHAEFFLER and WJB / INMOTION PARTS.

Part numbers include NATIONAL 99181, SCHAEFFLER SR3501 and WJB / INMOTION PARTS WS99181.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

19 Crankshaft Seal parts are listed for the 2011 Nissan Cube, from ELRING, AJUSA, FEL-PRO and 8 other brands. AJUSA 15045100 carries the "Popular" badge.

This table covers the bolts that clamp the cylinder head to the block. Read more

8 Cylinder Head Bolt parts for the 2011 Nissan Cube come from 8 brands — APEX, FEL-PRO, AJUSA and 5 other brands. The "Popular" part is APEX AHB556.

This group includes APEX AHB556, FEL-PRO ES72790 and AJUSA 81042900 and the remaining parts above.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

7 Cylinder Head Gasket parts for the 2011 Nissan Cube come from 6 brands — ELRING, APEX, FEL-PRO and 3 other brands. The "Popular" part is APEX AHG556.

This group includes APEX AHG556, FEL-PRO 26338PT and AJUSA 10180800 and the remaining parts above.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

11 Cylinder Head Gasket Set parts for the 2011 Nissan Cube come from 9 brands — FEL-PRO, ENGINETECH, APEX and 6 other brands. The "Popular" part is APEX AHS5056.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

KAT'S HEATERS supplies both parts for the 2011 Nissan Cube.

Part numbers include KAT'S HEATERS 28400 and KAT'S HEATERS 11417.

This table covers the Engine covers. Read more

This group shows a single part: TECHPRO NI1228136.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

3 Engine Kit Gasket Set parts for the 2011 Nissan Cube come from 3 brands — AJUSA, ITM ENGINE COMPONENTS and TOPLINE.

Listed part numbers: AJUSA 50283200, ITM ENGINE COMPONENTS 0900937 and TOPLINE CGSD43.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

4 Exhaust Valve parts are listed for the 2011 Nissan Cube, from QUALCAST, SBI and TOPLINE.

Part numbers include QUALCAST 103087, QUALCAST 1013399 and SBI 13399, among others listed above.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

5 Harmonic Balancer parts for the 2011 Nissan Cube come from 5 brands — SKP, ULTRA-POWER, ATP and 2 other brands. The "Popular" part is ULTRA-POWER 594374.

The Economy section lists 1 option from SKP — the catalog's value-priced group. SKP SK594374 is listed in this group.

In the Standard Replacement grade, ULTRA-POWER, ATP, DAYCO and 1 other brand supply 4 parts: built to original-equipment specification. A representative part number is ULTRA-POWER 594374.

Part numbers include ULTRA-POWER 594374, SKP SK594374 and ATP 102405, among others listed above.

This table covers the Intake manifolds. Typical signs include an exhaust tick, a vacuum leak, or a gasket that has burned through. Replace the gaskets and hardware; a warped flange will leak with a new gasket alone. Read more

2 Intake Manifold parts are listed for the 2011 Nissan Cube, from LARES and SKP.

Listed part numbers: LARES 33950 and SKP SK615008.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

8 Intake Manifold Gasket parts for the 2011 Nissan Cube come from 7 brands — ELRING, FEL-PRO, MAHLE / CLEVITE and 4 other brands. The "Popular" part is FEL-PRO MS97038.

Part numbers include FEL-PRO MS97038, MAHLE / CLEVITE MS19599 and APEX AMS5560, among others listed above.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

5 Intake Valve parts are listed for the 2011 Nissan Cube, from QUALCAST, ENGINETECH, SBI and 1 other brand. ENGINETECH IM4454 carries the "Popular" badge.

Part numbers include ENGINETECH IM4454, QUALCAST 103086 and QUALCAST 1013398, among others listed above.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

8 Motor Mount parts are listed for the 2011 Nissan Cube, from BECK/ARNLEY, SKP, ANCHOR and 3 other brands. SKP SKMA4323 carries the "Popular" badge.

Economy: 1 part, from SKP. A representative part number is SKP SKMA4323.

The Standard Replacement section: 7 options from BECK/ARNLEY, ANCHOR, DEA / MARMON RIDE CONTROL and 2 other brands. ANCHOR 9524 is listed in this group.

Listed part numbers: SKP SKMA4323, ANCHOR 9524 and BECK/ARNLEY 1042255, plus the other parts above.

This table covers the Motor Mount kits. Read more

One part is listed for the 2011 Nissan Cube — ANCHOR 300358.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

48 Oil parts are listed for the 2011 Nissan Cube, from LIQUI MOLY, VALVOLINE, MOBIL and 4 other brands. LIQUI MOLY 20228 carries the "Popular" badge. Grades run from Conventional through Synthetic Blend; Full Synthetic is the most populated section, led by LIQUI MOLY, VALVOLINE, LUCAS OIL and 3 other brands.

This table covers the Oil Cooler Mounting kits. Read more

2 Oil Cooler Mounting Kit parts for the 2011 Nissan Cube come from HAYDEN.

Listed part numbers: HAYDEN 238 and HAYDEN 153.

This table covers the seals at the Oil Cooler. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: FEL-PRO 72493.

This table covers the drain plugs in the oil pan. Read more

7 Oil Drain Plug parts are listed for the 2011 Nissan Cube, from DORMAN, AGS, BECK/ARNLEY and 3 other brands. DORMAN 090038 carries the "Popular" badge.

Part numbers include DORMAN 090038, DORMAN 090049 and AGS ODP00011, among others listed above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

6 Oil Drain Plug Gasket parts for the 2011 Nissan Cube come from 5 brands — DORMAN, FEL-PRO, AJUSA and 2 other brands. The "Popular" part is DORMAN 097134.

This group includes DORMAN 097134, FEL-PRO 73347 and AJUSA 01140600 and the remaining parts above.

This table covers the caps on the oil filler neck. Read more

5 Oil Filler Cap parts are listed for the 2011 Nissan Cube, from MOTORAD, CALORSTAT, DORMAN and 2 other brands. MOTORAD MO107 carries the "Popular" badge.

Listed part numbers: MOTORAD MO107, CALORSTAT OC2316 and DORMAN 90200, plus the other parts above.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

18 Oil Filter parts are listed for the 2011 Nissan Cube, from VARIOUS MFR, BOSCH, WIX and 11 other brands. CHAMP / LUBER-FINER PH2876 carries the "Popular" badge.

Economy: 7 parts, from VARIOUS MFR, CHAMP / LUBER-FINER, BOSCH and 3 other brands. A representative part number is CHAMP / LUBER-FINER PH2876.

In the High Performance / Heavy Duty grade, MOBIL and WIX supply 2 parts: grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. A representative part number is MOBIL M1108A.

The Standard Replacement section: 9 options from BOSCH, WIX, BECK/ARNLEY and 6 other brands. BOSCH 3300 is listed in this group.

This table covers the oil pans that hold the engine's oil sump. Read more

6 Oil Pan parts for the 2011 Nissan Cube come from 6 brands — AUTOTECNICA, SKP, ATP and 3 other brands. The "Popular" part is AUTOTECNICA NI1416320.

Part numbers include AUTOTECNICA NI1416320, SKP SK264507 and ATP 103302, among others listed above.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Oil Pan Gasket parts are listed for the 2011 Nissan Cube, from VICTOR REINZ, APEX, FEL-PRO and 1 other brand. VICTOR REINZ 703141410 carries the "Popular" badge.

Listed part numbers: VICTOR REINZ 703141410, APEX AOP556 and FEL-PRO OS30805, plus the other parts above.

This table covers the Oil pumps. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit. Read more

One part is listed for the 2011 Nissan Cube — TOPLINE OPD43.

This table covers the chains that drive the oil pump. Read more

4 Oil Pump Chain parts for the 2011 Nissan Cube come from 4 brands — CLOYES, FVP, INA and 1 other brand.

This group includes CLOYES C725F and INA ZCC725F and the remaining parts above.

This table covers the Oil Pump Chain tensioners. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

One part is listed for the 2011 Nissan Cube — S.A. GEAR 91091.

This table covers the Oil Pump sprockets. Read more

4 Oil Pump Sprocket parts for the 2011 Nissan Cube come from 4 brands — CLOYES, FVP, INA and 1 other brand.

Listed part numbers: CLOYES S945 and INA ZSS945, plus the other parts above.

This table covers the Oil Temperature senders. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS TX187.

This table covers the pistons that travel in each cylinder. Typical signs include knock, blow-by, or a cylinder that will not hold compression. Piston work is a short-block job. Match bore, pin and ring pack in the notes — not the photo. Read more

2 Piston parts for the 2011 Nissan Cube come from 2 brands — MAHLE / CLEVITE and TOPLINE.

In the Premium grade, MAHLE / CLEVITE supplies 1 part: a step above OE specification in materials, tolerances or warranty terms. A representative part number is MAHLE / CLEVITE 2243992.

Standard Replacement: 1 part, from TOPLINE. A representative part number is TOPLINE PAD43.

Part numbers include MAHLE / CLEVITE 2243992 and TOPLINE PAD43.

This table covers the Piston Pin bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

2 Piston Pin Bushing parts are listed for the 2011 Nissan Cube, from ENGINETECH and TOPLINE.

Part numbers include ENGINETECH EB0144 and TOPLINE PBTO39.

This table covers the rings that seal each piston to the cylinder wall. Read more

7 Piston Ring parts for the 2011 Nissan Cube come from 6 brands — HASTINGS MANUFACTURING, ENGINETECH, SEALED POWER and 3 other brands. The "Popular" part is ENGINETECH S84134.

Premium: 3 parts, from ENGINETECH, SEALED POWER and MAHLE / CLEVITE. A representative part number is ENGINETECH S84134.

Standard Replacement: 4 parts, from HASTINGS MANUFACTURING, ITM ENGINE COMPONENTS and TOPLINE. A representative part number is HASTINGS MANUFACTURING 2C5223S.

Part numbers include ENGINETECH S84134, SEALED POWER E1008KC and MAHLE / CLEVITE 42225CP, among others listed above.

This table covers the Thrust washers. Read more

4 Thrust Washer parts are listed for the 2011 Nissan Cube, from ENGINETECH, ITM ENGINE COMPONENTS, KING ENGINE BEARINGS and 1 other brand.

Part numbers include ENGINETECH TW1038, ITM ENGINE COMPONENTS 1T6161 and KING ENGINE BEARINGS TW1053AM, among others listed above.

This table covers the Timing Cam sprockets. Read more

6 Timing Cam Sprocket parts are listed for the 2011 Nissan Cube, from CLOYES, S.A. GEAR, FVP and 3 other brands. CLOYES S946T carries the "Popular" badge.

Listed part numbers: CLOYES S946T and S.A. GEAR S1302, plus the other parts above.

This table covers the timing chains that keep the cams in time with the crank. Read more

5 Timing Chain parts for the 2011 Nissan Cube come from 5 brands — S.A. GEAR, CLOYES, INA and 2 other brands. The "Popular" part is S.A. GEAR C1029.

This group includes S.A. GEAR C1029, CLOYES C723F and INA ZCC723F and the remaining parts above.

This table covers kits that group a timing chain with the related tensioners and guides. Read more

9 Timing Chain & Component Kit parts are listed for the 2011 Nissan Cube, from ITM ENGINE COMPONENTS, S.A. GEAR, INA and 3 other brands. ENGINETECH TS7230 carries the "Popular" badge.

Economy: 5 parts, from ITM ENGINE COMPONENTS, S.A. GEAR and PREFERRED COMPONENTS INC. A representative part number is ITM ENGINE COMPONENTS 05393602.

The Standard Replacement section: 4 options from INA, ENGINETECH and MELLING. ENGINETECH TS7230 is listed in this group.

Part numbers include ENGINETECH TS7230, ITM ENGINE COMPONENTS 05393602 and ITM ENGINE COMPONENTS 05392604, among others listed above.

This table covers the guides and dampers that keep the timing chain on its path. Read more

11 Timing Chain Guide / Damper parts for the 2011 Nissan Cube come from 5 brands — S.A. GEAR, PREFERRED COMPONENTS INC, CLOYES and 2 other brands. The "Popular" part is CLOYES 95582.

This table covers the tensioners that keep the timing chain taut. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

8 Timing Chain Tensioner parts are listed for the 2011 Nissan Cube, from CLOYES, INA, S.A. GEAR and 3 other brands. CLOYES 95585 carries the "Popular" badge.

This group includes CLOYES 95585, S.A. GEAR 91090 and CLOYES 95584 and the remaining parts above.

This table covers the gaskets that seal the Timing Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 2011 Nissan Cube — MAHLE / CLEVITE JV5135.

This table covers the seals at the Timing Cover. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Timing Cover Seal parts are listed for the 2011 Nissan Cube, from MAHLE / CLEVITE and SKF.

This group includes MAHLE / CLEVITE 67783 and SKF 18132.

This table covers the crankshaft sprockets that drive the timing chain or belt. Read more

5 Timing Crank Sprocket parts are listed for the 2011 Nissan Cube, from S.A. GEAR, CLOYES, INA and 2 other brands. S.A. GEAR S1275 carries the "Popular" badge.

Part numbers include S.A. GEAR S1275, CLOYES S943 and INA ZSS943, among others listed above.

This table covers the Torque Strut mounts. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

8 Torque Strut Mount parts for the 2011 Nissan Cube come from 5 brands — ANCHOR, DEA / MARMON RIDE CONTROL, WESTAR and 2 other brands. The "Popular" part is ANCHOR 9228.

The Economy section: 1 option from BECK/ARNLEY. BECK/ARNLEY 1042201 is listed in this group.

Standard Replacement: 7 parts, from ANCHOR, DEA / MARMON RIDE CONTROL, WESTAR and 1 other brand. A representative part number is ANCHOR 9228.

Listed part numbers: ANCHOR 9228, BECK/ARNLEY 1042201 and ANCHOR 9422, plus the other parts above.