2011 Nissan Juke Drivetrain Parts

This table covers the seals where an axle shaft exits the housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Axle Shaft Seal parts for the 2011 Nissan Juke come from 2 brands — SKF and TIMKEN.

Listed part numbers: SKF 15372 and TIMKEN SL260033.

This table covers the complete CV axle shafts from differential (or hub) to wheel. Typical signs include a click in tight turns, grease flung around the wheel well, or a vibration that builds with speed. A torn boot caught early is a boot kit; caught late it is the whole axle. Torque the axle nut to the method in the notes. Read more

28 CV Axle parts for the 2011 Nissan Juke come from 5 brands — TOP NOTCH, GSP, TRAKMOTIVE and 2 other brands. The "Popular" part is APWI NI8445. A list this long means CV Axle applications vary by configuration — the notes carry the qualifiers.

This table covers the boots that keep grease in a CV joint. Typical signs include a split boot, grease flung around the joint, or a click once grit is inside. A boot caught early is a kit. Once the joint has clicked, the joint itself is usually worn. Read more

6 CV Joint Boot parts for the 2011 Nissan Juke come from 2 brands — BECK/ARNLEY and MEVOTECH. The "Popular" part is MEVOTECH DX900.

Listed part numbers: MEVOTECH DX900, MEVOTECH DX585 and BECK/ARNLEY 1032804, plus the other parts above.

This table covers the bearings and races that support the differential carrier. Read more

2 Differential Carrier Bearing / Race parts for the 2011 Nissan Juke come from TIMKEN.

This group includes TIMKEN BRG1001 and TIMKEN BRG1002.

This table covers the bearings and races on the differential pinion. Read more

5 Differential Pinion Bearing / Race parts are listed for the 2011 Nissan Juke, from TIMKEN and SKF. TIMKEN SET32 carries the "Popular" badge.

Part numbers include TIMKEN SET32, SKF BR32206 and SKF BR32, among others listed above.

This table covers the wear sleeves used to restore a grooved pinion seal surface. Read more

3 Differential Pinion Repair Sleeve parts for the 2011 Nissan Juke come from 3 brands — BCA, NATIONAL and WJB / INMOTION PARTS.

This group includes BCA NS99146, NATIONAL 99146 and WJB / INMOTION PARTS WS99146.

This table covers the seals at the differential pinion yoke. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

5 Differential Pinion Seal parts for the 2011 Nissan Juke come from 4 brands — WJB / INMOTION PARTS, NATIONAL, SKF and 1 other brand. The "Popular" part is NATIONAL 710985.

Part numbers include NATIONAL 710985, SKF 14433A and TIMKEN SL260032, among others listed above.

This table covers the seals at the Differential. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Differential Seal parts are listed for the 2011 Nissan Juke, from NATIONAL and WJB / INMOTION PARTS.

Listed part numbers: NATIONAL 710984 and WJB / INMOTION PARTS WS710984.

This table covers the driveshafts that carry torque from the transmission or transfer case. Read more

2 Drive Shaft parts are listed for the 2011 Nissan Juke, from DORMAN and WJB / INMOTION PARTS.

This group includes DORMAN 986589 and WJB / INMOTION PARTS WDS86589.

This table covers the Drive Shaft Center Support bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

One part is listed for the 2011 Nissan Juke — ANCHOR 6150.

This table covers the gear oils specified for the axle or transfer case. Typical signs include a low-oil lamp, knocking, or oil that has gone thin before the next interval. Match the viscosity and spec in the notes, not just the weight on the bottle. Read more

8 Gear Oil parts for the 2011 Nissan Juke come from 3 brands — VALVOLINE, LUCAS OIL and MOBIL. The "Popular" part is MOBIL 104361.

The SAE 75W-90 section lists 1 option from MOBIL — grouped under the catalog's "SAE 75W-90" designation — the notes column spells out what sets them apart. MOBIL 104361 is listed in this group.

The SAE 80W-90 section lists 7 options from VALVOLINE and LUCAS OIL — grouped under the catalog's "SAE 80W-90" designation — the notes column spells out what sets them apart. VALVOLINE VV831 is listed in this group.

This group includes MOBIL 104361, VALVOLINE VV831 and LUCAS OIL 10043 and the remaining parts above.

This table covers the fluids specified for the transfer case. Typical signs include discolored fluid, a burnt smell, or a level that keeps dropping. Use only the specification in the notes — the tables group grades because they are not interchangeable. Read more

8 Transfer Case Fluid parts for the 2011 Nissan Juke come from 3 brands — VALVOLINE, LUCAS OIL and MOBIL. The "Popular" part is MOBIL 104361.

The SAE 75W-90 section: 1 option from MOBIL. MOBIL 104361 is listed in this group.

The SAE 80W-90 section: 7 options from VALVOLINE and LUCAS OIL. VALVOLINE VV831 is listed in this group.

Listed part numbers: MOBIL 104361, VALVOLINE VV831 and LUCAS OIL 10043, plus the other parts above.

This table covers the Transfer Case Input Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

This group shows a single part: NSK 32910J.

This table covers the wear sleeves used to restore a Transfer Case Input Shaft seal surface. Read more

3 Transfer Case Input Shaft Repair Sleeve parts are listed for the 2011 Nissan Juke, from BCA, NATIONAL and WJB / INMOTION PARTS.

This group includes BCA NS99189, NATIONAL 99189 and WJB / INMOTION PARTS WS99189.

This table covers the seals at the Transfer Case Input Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Transfer Case Input Shaft Seal parts are listed for the 2011 Nissan Juke, from JAPANESE OE, NATIONAL and WJB / INMOTION PARTS.

Listed part numbers: JAPANESE OE 9031148122, NATIONAL 224820 and WJB / INMOTION PARTS WS224820.

This table covers the Transfer Case Output Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

7 Transfer Case Output Shaft Bearing parts are listed for the 2011 Nissan Juke, from WJB / INMOTION PARTS, BCA, SKF and 1 other brand. BCA NB32206 carries the "Popular" badge.

In the Economy grade, WJB / INMOTION PARTS supplies 2 parts: the catalog's value-priced group. A representative part number is WJB / INMOTION PARTS WT32205.

The Standard Replacement section lists 5 options from BCA, SKF and NATIONAL — built to original-equipment specification. BCA NB32206 is listed in this group.

Part numbers include BCA NB32206, WJB / INMOTION PARTS WT32205 and WJB / INMOTION PARTS WT32206, among others listed above.

This table covers the seals at the Transfer Case Output Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

7 Transfer Case Output Shaft Seal parts for the 2011 Nissan Juke come from 5 brands — NATIONAL, WJB / INMOTION PARTS, BCA and 2 other brands. The "Popular" part is NATIONAL 225875.

This group includes NATIONAL 225875, WJB / INMOTION PARTS WS225875 and BCA NS225875 and the remaining parts above.

This table covers the U-joints in the driveshaft. Read more

This group shows a single part: GKN U024.