2016 Nissan Juke Drivetrain Parts

This table covers the seals where an axle shaft exits the housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

One part is listed for the 2016 Nissan Juke — TIMKEN SL260033.

This table covers the complete CV axle shafts from differential (or hub) to wheel. Typical signs include a click in tight turns, grease flung around the wheel well, or a vibration that builds with speed. A torn boot caught early is a boot kit; caught late it is the whole axle. Torque the axle nut to the method in the notes. Read more

30 CV Axle parts are listed for the 2016 Nissan Juke, from TOP NOTCH, GSP, TRAKMOTIVE and 3 other brands. APWI NI8445 carries the "Popular" badge. Grades run from Economy through Standard Replacement; Standard Replacement is the most populated section, led by TOP NOTCH, GSP, TRAKMOTIVE and 2 other brands.

This table covers the constant-velocity joints at each end of a drive axle. Read more

One part is listed for the 2016 Nissan Juke — GKN 306027.

This table covers the boots that keep grease in a CV joint. Typical signs include a split boot, grease flung around the joint, or a click once grit is inside. A boot caught early is a kit. Once the joint has clicked, the joint itself is usually worn. Read more

6 CV Joint Boot parts are listed for the 2016 Nissan Juke, from BECK/ARNLEY and MEVOTECH. BECK/ARNLEY 1032938 carries the "Popular" badge.

Listed part numbers: BECK/ARNLEY 1032938, MEVOTECH DX787 and BECK/ARNLEY 1032962, plus the other parts above.

This table covers the bearings and races that support the differential carrier. Read more

TIMKEN supplies both parts for the 2016 Nissan Juke.

This group includes TIMKEN BRG1001 and TIMKEN BRG1002.

This table covers the bearings and races on the differential pinion. Read more

4 Differential Pinion Bearing / Race parts for the 2016 Nissan Juke come from 2 brands — SKF and TIMKEN.

Part numbers include SKF BR32206, SKF BR32 and TIMKEN SET32, among others listed above.

This table covers the wear sleeves used to restore a grooved pinion seal surface. Read more

3 Differential Pinion Repair Sleeve parts are listed for the 2016 Nissan Juke, from BCA, NATIONAL and WJB / INMOTION PARTS.

Listed part numbers: BCA NS99146, NATIONAL 99146 and WJB / INMOTION PARTS WS99146.

This table covers the seals at the differential pinion yoke. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

5 Differential Pinion Seal parts are listed for the 2016 Nissan Juke, from WJB / INMOTION PARTS, NATIONAL, SKF and 1 other brand. NATIONAL 710985 carries the "Popular" badge.

Part numbers include NATIONAL 710985, SKF 14433A and TIMKEN SL260032, among others listed above.

This table covers the seals at the Differential. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Differential Seal parts for the 2016 Nissan Juke come from 2 brands — NATIONAL and WJB / INMOTION PARTS.

Part numbers include NATIONAL 710984 and WJB / INMOTION PARTS WS710984.

This table covers the driveshafts that carry torque from the transmission or transfer case. Read more

2 Drive Shaft parts for the 2016 Nissan Juke come from 2 brands — DORMAN and WJB / INMOTION PARTS.

Part numbers include DORMAN 986589 and WJB / INMOTION PARTS WDS86589.

This table covers the Drive Shaft Center Support bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

This group shows a single part: ANCHOR 6150.

This table covers the gear oils specified for the axle or transfer case. Typical signs include a low-oil lamp, knocking, or oil that has gone thin before the next interval. Match the viscosity and spec in the notes, not just the weight on the bottle. Read more

8 Gear Oil parts are listed for the 2016 Nissan Juke, from VALVOLINE, LUCAS OIL and MOBIL. MOBIL 104361 carries the "Popular" badge.

In the SAE 75W-90 grade, MOBIL supplies 1 part: grouped under the catalog's "SAE 75W-90" designation — the notes column spells out what sets them apart. A representative part number is MOBIL 104361.

In the SAE 80W-90 grade, VALVOLINE and LUCAS OIL supply 7 parts: grouped under the catalog's "SAE 80W-90" designation — the notes column spells out what sets them apart. A representative part number is VALVOLINE VV831.

Listed part numbers: MOBIL 104361, VALVOLINE VV831 and LUCAS OIL 10043, plus the other parts above.

This table covers the fluids specified for the transfer case. Typical signs include discolored fluid, a burnt smell, or a level that keeps dropping. Use only the specification in the notes — the tables group grades because they are not interchangeable. Read more

8 Transfer Case Fluid parts are listed for the 2016 Nissan Juke, from VALVOLINE, LUCAS OIL and MOBIL. MOBIL 104361 carries the "Popular" badge.

SAE 75W-90: 1 part, from MOBIL. A representative part number is MOBIL 104361.

SAE 80W-90: 7 parts, from VALVOLINE and LUCAS OIL. A representative part number is VALVOLINE VV831.

Part numbers include MOBIL 104361, VALVOLINE VV831 and LUCAS OIL 10043, among others listed above.

This table covers the Transfer Case Input Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

One part is listed for the 2016 Nissan Juke — NSK 32910J.

This table covers the wear sleeves used to restore a Transfer Case Input Shaft seal surface. Read more

3 Transfer Case Input Shaft Repair Sleeve parts for the 2016 Nissan Juke come from 3 brands — BCA, NATIONAL and WJB / INMOTION PARTS.

This group includes BCA NS99189, NATIONAL 99189 and WJB / INMOTION PARTS WS99189.

This table covers the seals at the Transfer Case Input Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Transfer Case Input Shaft Seal parts for the 2016 Nissan Juke come from 3 brands — JAPANESE OE, NATIONAL and WJB / INMOTION PARTS.

Part numbers include JAPANESE OE 9031148122, NATIONAL 224820 and WJB / INMOTION PARTS WS224820.

This table covers the Transfer Case Output Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

5 Transfer Case Output Shaft Bearing parts for the 2016 Nissan Juke come from 3 brands — WJB / INMOTION PARTS, BCA and NATIONAL. The "Popular" part is BCA NB32206.

The Economy section lists 2 options from WJB / INMOTION PARTS — the catalog's value-priced group. WJB / INMOTION PARTS WT32205 is listed in this group.

In the Standard Replacement grade, BCA and NATIONAL supply 3 parts: built to original-equipment specification. A representative part number is BCA NB32206.

Part numbers include BCA NB32206, WJB / INMOTION PARTS WT32205 and WJB / INMOTION PARTS WT32206, among others listed above.

This table covers the seals at the Transfer Case Output Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

7 Transfer Case Output Shaft Seal parts are listed for the 2016 Nissan Juke, from NATIONAL, WJB / INMOTION PARTS, BCA and 2 other brands. NATIONAL 225875 carries the "Popular" badge.

Part numbers include NATIONAL 225875, WJB / INMOTION PARTS WS225875 and BCA NS225875, among others listed above.

This table covers the U-joints in the driveshaft. Read more

One part is listed for the 2016 Nissan Juke — GKN U024.