The 2012 Nissan Tiida has 17 automatic transmission parts with verified fitment on this page — 5 part types and 7 brands, covering the 1.8L L4 engine. Each part includes a manufacturer part number and application notes.
The automatic transmission on the 2012 Nissan Tiida covers the automatic gearbox and its supporting cast — filters, coolers, solenoids, mounts and torque-converter parts. The largest groups are Transmission Fluid Additive (8 parts), Output Shaft Seal (4 parts) and Fluid Pump Seal (2 parts). The other 2 part types cover the remaining 3 parts.
The 2012 Nissan Tiida came with a single engine, the 1.8L L4, and every part is verified against it.
7 brands supply automatic transmission parts for the 2012 Nissan Tiida, led by LUBEGARD (8 parts), SKF (3 parts) and SCHAEFFLER (2 parts), plus 4 more brands.
A "Popular" badge means the source catalog flagged the part as frequently chosen for the 2012 Nissan Tiida. 2 parts have it, including LUBEGARD 19610 (Transmission Fluid Additive) and LUBEGARD 60902 (Transmission Fluid Additive). Each part number opens a page with every vehicle that part fits.
Fluid Pump Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| SKF | 20072A | 🇲🇽 MX | Front | View on Amazon |
| WJB / INMOTION PARTS | WS20072A | 🇲🇽 MX | Front | View on Amazon |
This table covers the seals at the Fluid Pump. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
2 Fluid Pump Seal parts for the 2012 Nissan Tiida come from 2 brands — SKF and WJB / INMOTION PARTS.
This group includes SKF 20072A and WJB / INMOTION PARTS WS20072A.
Output Shaft Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| SCHAEFFLER | SS2622 | 🇲🇽 MX | Left10 MM Width | View on Amazon |
| SCHAEFFLER | SS3697 | 🇲🇽 MX | Right56.337 mm Outside Diameter | View on Amazon |
| SKF | 15709 | 🇲🇽 MX | Left | View on Amazon |
| SKF | 12912 | 🇲🇽 MX | Right | View on Amazon |
This table covers the seals at the Output Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
4 Output Shaft Seal parts are listed for the 2012 Nissan Tiida, from SCHAEFFLER and SKF.
Part numbers include SCHAEFFLER SS2622, SCHAEFFLER SS3697 and SKF 15709, among others listed above.
Rebuild Kit
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| TRANSTEC | 81000117 | 🇺🇸 US 🇨🇦 CA | without PistonsDuraprene Pan Gasket | View on Amazon |
This table covers the rebuild kits for this assembly.
This group shows a single part: TRANSTEC 81000117.
Transmission Fluid Additive
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| LUBEGARD Popular | 19610 | 🇲🇽 MX | Instant Shudder Fixx2 oz | View on Amazon |
| LUBEGARD Popular | 60902 | 🇲🇽 MX | Automatic Transmission Fluid Protectant10 oz | View on Amazon |
| LUBEGARD | 19689 | 🇲🇽 MX | Instant Shudder Fixx2 oz | View on Amazon |
| LUBEGARD | 19680 | 🇲🇽 MX | Instant Shudder Fixx2 oz, clam shell | View on Amazon |
| LUBEGARD | 19688 | 🇲🇽 MX | Instant Shudder Fixx2 oz, Spanish | View on Amazon |
| LUBEGARD | 50902 | 🇲🇽 MX | Automatic Transmission Fluid Protectant32 oz | View on Amazon |
| LUBEGARD | 50904 | 🇲🇽 MX | Automatic Transmission Fluid Protectant5 Gallon | View on Amazon |
| LUBEGARD | 50905 | 🇲🇽 MX | Automatic Transmission Fluid Protectant55 Gallon | View on Amazon |
This table covers the conditioners and additives used with this transmission fluid.
LUBEGARD supplies the 8 Transmission Fluid Additive parts for the 2012 Nissan Tiida. LUBEGARD 19610 carries the "Popular" badge.
This group includes LUBEGARD 19610, LUBEGARD 60902 and LUBEGARD 19689 and the remaining parts above.
Transmission Mount
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ANCHOR | 9230 | 🇲🇽 MX | LeftAutomatic trans. | View on Amazon |
| DEA / MARMON RIDE CONTROL | A4312 | 🇲🇽 MX | View on Amazon |
This table covers the mounts that hold the transmission to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes.
2 Transmission Mount parts for the 2012 Nissan Tiida come from 2 brands — ANCHOR and DEA / MARMON RIDE CONTROL.
This group includes ANCHOR 9230 and DEA / MARMON RIDE CONTROL A4312.
Buying Automatic Transmission Parts for a 2012 Nissan Tiida
On this vehicle, the automatic transmission covers the automatic gearbox and its supporting cast — filters, coolers, solenoids, mounts and torque-converter parts.
- Confirm you have the 1.8L L4 engine — every part on this page is matched to it.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace the filter and pan gasket with every fluid service, and flush the cooler lines when replacing a failed unit.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Transmission Fluid Additive and Output Shaft Seal .
Frequently Asked Questions
How many automatic transmission parts fit the 2012 Nissan Tiida?
Our catalog currently lists 17 automatic transmission parts for the 2012 Nissan Tiida across 5 subcategories and 7 brands, covering the 1.8L L4 engine. Each part is matched to the engine(s) it fits.
What are the signs of automatic transmission problems on a 2012 Nissan Tiida?
Common symptoms include delayed or harsh engagement, slipping under load, fluid that smells burnt, or shuddering at light throttle around 40 mph. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, replace the filter and pan gasket with every fluid service, and flush the cooler lines when replacing a failed unit.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2012 Nissan Tiida was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 2012 Nissan Tiida?
Every part on this page is matched to the 1.8L L4 engine. Then use exactly the fluid specification in the notes — automatic transmissions are the least forgiving component on the vehicle about fluid choice. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 2012 Nissan Tiida
Automatic Transmission Parts for Other Nissan Tiida Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.