2012 Nissan Tiida Engine Parts

This table covers the chains that drive the balance shafts. Read more

One part is listed for the 2012 Nissan Tiida — PREFERRED COMPONENTS INC C763.

This table covers the Balance Shaft Chain tensioners. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

This group shows a single part: PREFERRED COMPONENTS INC T66221.

This table covers the Balance Shaft sprockets. Read more

One part is listed for the 2012 Nissan Tiida — MELLING S945.

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Camshaft Seal parts for the 2012 Nissan Tiida come from ELRING.

This group includes ELRING 073890 and ELRING 584880.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

One part is listed for the 2012 Nissan Tiida — KING ENGINE BEARINGS CR4638SM.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

2 Conversion / Lower Gasket Set parts are listed for the 2012 Nissan Tiida, from AJUSA and ELRING.

This group includes AJUSA 54157700 and ELRING 522360.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

2 Crankshaft Main Bearing parts for the 2012 Nissan Tiida come from 2 brands — KING ENGINE BEARINGS and MAHLE / CLEVITE.

This group includes KING ENGINE BEARINGS MB5781SI and MAHLE / CLEVITE MS2301A.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

7 Crankshaft Seal parts for the 2012 Nissan Tiida come from 3 brands — ELRING, AJUSA and SCHAEFFLER. The "Popular" part is AJUSA 15045100.

This group includes AJUSA 15045100, ELRING 023530 and AJUSA 15093000 and the remaining parts above.

This table covers the gaskets that seal the Crankshaft Seal. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 2012 Nissan Tiida — ELRING 504670.

This table covers the bolts that clamp the cylinder head to the block. Read more

3 Cylinder Head Bolt parts are listed for the 2012 Nissan Tiida, from ELRING and AJUSA.

Part numbers include AJUSA 81042900, ELRING 373281 and ELRING 890320.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

6 Cylinder Head Gasket parts are listed for the 2012 Nissan Tiida, from ELRING and AJUSA. AJUSA 10180800 carries the "Popular" badge.

Listed part numbers: AJUSA 10180800, ELRING 302850 and ELRING 308110, plus the other parts above.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

4 Cylinder Head Gasket Set parts are listed for the 2012 Nissan Tiida, from ELRING and AJUSA.

This group includes AJUSA 52263800, ELRING 794650 and ELRING 383650 and the remaining parts above.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

3 Engine Kit Gasket Set parts are listed for the 2012 Nissan Tiida, from ELRING and AJUSA.

Part numbers include AJUSA 50283200, ELRING 994570 and ELRING 994560.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

This group shows a single part: QUALCAST 103087.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

2 Harmonic Balancer parts are listed for the 2012 Nissan Tiida, from ATP and DORMAN.

Listed part numbers: ATP 102405 and DORMAN 594374.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Intake Manifold Gasket parts are listed for the 2012 Nissan Tiida, from ELRING, DORMAN and VICTOR REINZ. ELRING 327320 carries the "Popular" badge.

Listed part numbers: ELRING 327320, DORMAN 953301 and ELRING 307020, plus the other parts above.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

This group shows a single part: QUALCAST 103086.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

4 Motor Mount parts for the 2012 Nissan Tiida come from 4 brands — ANCHOR, DEA / MARMON RIDE CONTROL, PIONEER and 1 other brand.

This group includes ANCHOR 9524, DEA / MARMON RIDE CONTROL A4323 and PIONEER 614323 and the remaining parts above.

This table covers the Motor Mount kits. Read more

This group shows a single part: ANCHOR 300358.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

2 Oil parts for the 2012 Nissan Tiida come from VALVOLINE.

This group includes VALVOLINE 822344 and VALVOLINE 881160.

This table covers the Oil Cooler Mounting kits. Read more

HAYDEN supplies both parts for the 2012 Nissan Tiida.

Part numbers include HAYDEN 238 and HAYDEN 153.

This table covers the drain plugs in the oil pan. Read more

6 Oil Drain Plug parts for the 2012 Nissan Tiida come from 3 brands — ELRING, DORMAN and AGS. The "Popular" part is DORMAN 090038.

Listed part numbers: DORMAN 090038, DORMAN 090049 and AGS ODP00011, plus the other parts above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Oil Drain Plug Gasket parts are listed for the 2012 Nissan Tiida, from DORMAN, ELRING and AJUSA. DORMAN 097134 carries the "Popular" badge.

Part numbers include DORMAN 097134, AJUSA 01140600 and DORMAN 997134CD, among others listed above.

This table covers the caps on the oil filler neck. Read more

2 Oil Filler Cap parts for the 2012 Nissan Tiida come from 2 brands — GATES and MOTORAD.

Listed part numbers: GATES 31115 and MOTORAD MO107.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

11 Oil Filter parts for the 2012 Nissan Tiida come from 9 brands — VARIOUS MFR, WIX, CHAMP / LUBER-FINER and 6 other brands. The "Popular" part is CHAMP / LUBER-FINER PH2876.

The Economy section lists 4 options from CHAMP / LUBER-FINER, FVP, PRO-TEC and 1 other brand — the catalog's value-priced group. CHAMP / LUBER-FINER PH2876 is listed in this group.

The High Performance / Heavy Duty section lists 2 options from MOBIL and WIX — grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. MOBIL M1108A is listed in this group.

In the Standard Replacement grade, WIX, HASTINGS / BALDWIN, MANN and 2 other brands supply 5 parts: built to original-equipment specification. A representative part number is WIX 51358.

This table covers the seals at the Oil Filter Housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: ELRING 365960.

This table covers the oil pans that hold the engine's oil sump. Read more

5 Oil Pan parts are listed for the 2012 Nissan Tiida, from SKP, AUTOTECNICA, DORMAN and 2 other brands. SKP SK264507 carries the "Popular" badge.

This group includes SKP SK264507, AUTOTECNICA NI1416320 and DORMAN 264507 and the remaining parts above.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: ELRING 380960.

This table covers the Oil pumps. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit. Read more

3 Oil Pump parts for the 2012 Nissan Tiida come from 3 brands — AISIN, ASTEMO / HITACHI and MELLING.

Listed part numbers: AISIN OPN709, ASTEMO / HITACHI OUP0012 and MELLING M393.

This table covers the chains that drive the oil pump. Read more

2 Oil Pump Chain parts are listed for the 2012 Nissan Tiida, from CLOYES and FVP.

Listed part numbers: CLOYES C725F, plus the other parts above.

This table covers the Oil Pump sprockets. Read more

2 Oil Pump Sprocket parts are listed for the 2012 Nissan Tiida, from CLOYES and FVP.

This group includes CLOYES S945 and the remaining parts above.

This table covers the rings that seal each piston to the cylinder wall. Read more

3 Piston Ring parts are listed for the 2012 Nissan Tiida, from HASTINGS MANUFACTURING and MAHLE / CLEVITE.

The Premium section lists 1 option from MAHLE / CLEVITE — a step above OE specification in materials, tolerances or warranty terms. MAHLE / CLEVITE 42225CP is listed in this group.

The Standard Replacement section: 2 options from HASTINGS MANUFACTURING. HASTINGS MANUFACTURING 2C5223S is listed in this group.

Listed part numbers: MAHLE / CLEVITE 42225CP, HASTINGS MANUFACTURING 2C5223S and HASTINGS MANUFACTURING 2C5223.

This table covers the Thrust washers. Read more

2 Thrust Washer parts for the 2012 Nissan Tiida come from 2 brands — KING ENGINE BEARINGS and MAHLE / CLEVITE.

Listed part numbers: KING ENGINE BEARINGS TW1053AM and MAHLE / CLEVITE TW697S.

This table covers the Timing Cam sprockets. Read more

3 Timing Cam Sprocket parts for the 2012 Nissan Tiida come from 3 brands — CLOYES, FVP and PREFERRED COMPONENTS INC.

Listed part numbers: CLOYES S946T and PREFERRED COMPONENTS INC G56364, plus the other parts above.

This table covers the timing chains that keep the cams in time with the crank. Read more

3 Timing Chain parts are listed for the 2012 Nissan Tiida, from CLOYES, FVP and PREFERRED COMPONENTS INC.

Listed part numbers: CLOYES C723F and PREFERRED COMPONENTS INC C7162, plus the other parts above.

This table covers kits that group a timing chain with the related tensioners and guides. Read more

6 Timing Chain & Component Kit parts for the 2012 Nissan Tiida come from 5 brands — CLOYES, PREFERRED COMPONENTS INC, SKP and 2 other brands. The "Popular" part is CLOYES 90723SX.

The Economy section: 2 options from PREFERRED COMPONENTS INC and SKP. PREFERRED COMPONENTS INC TS11162 is listed in this group.

Standard Replacement: 4 parts, from CLOYES, INA and MELLING. A representative part number is CLOYES 90723SX.

Part numbers include CLOYES 90723SX, PREFERRED COMPONENTS INC TS11162 and SKP SK90723S, among others listed above.

This table covers the guides and dampers that keep the timing chain on its path. Read more

5 Timing Chain Guide / Damper parts are listed for the 2012 Nissan Tiida, from CLOYES and PREFERRED COMPONENTS INC. CLOYES 95582 carries the "Popular" badge.

This group includes CLOYES 95582, CLOYES 95583 and CLOYES 95581 and the remaining parts above.

This table covers the tensioners that keep the timing chain taut. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

5 Timing Chain Tensioner parts for the 2012 Nissan Tiida come from 3 brands — CLOYES, FVP and PREFERRED COMPONENTS INC. The "Popular" part is CLOYES 95585.

Part numbers include CLOYES 95585 and CLOYES 95584, among others listed above.

This table covers the seals at the Timing Cover. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: SCHAEFFLER SS2845.

This table covers the crankshaft sprockets that drive the timing chain or belt. Read more

3 Timing Crank Sprocket parts for the 2012 Nissan Tiida come from 3 brands — CLOYES, FVP and PREFERRED COMPONENTS INC.

This group includes CLOYES S943 and PREFERRED COMPONENTS INC G56355 and the remaining parts above.

This table covers the Torque Strut mounts. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

7 Torque Strut Mount parts are listed for the 2012 Nissan Tiida, from ANCHOR, DEA / MARMON RIDE CONTROL and WESTAR. ANCHOR 9228 carries the "Popular" badge.

Listed part numbers: ANCHOR 9228, ANCHOR 9422 and ANCHOR 9767, plus the other parts above.

This table covers the fasteners that mount the turbocharger. Read more

One part is listed for the 2012 Nissan Tiida — ELRING 584560.

This table covers the Valve covers. Read more

2 Valve Cover parts are listed for the 2012 Nissan Tiida, from AUTOTECNICA and DORMAN.

Part numbers include AUTOTECNICA NI1422749 and DORMAN 264744.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Valve Cover Gasket parts for the 2012 Nissan Tiida come from 2 brands — ELRING and AJUSA.

This group includes AJUSA 11113200, ELRING 311650 and ELRING 307010 and the remaining parts above.

This table covers the pressed-in bronze and cast-iron guides that align valve stems. Typical signs include oil smoke on startup, a guide that has gone oval, or a valve that no longer seats quietly. Guides are a machine-shop fit. Confirm stem diameter in the notes before ordering. Read more

2 Valve Guide parts for the 2012 Nissan Tiida come from QUALCAST.

Part numbers include QUALCAST 303245 and QUALCAST 303244.

This table covers the keepers that lock each valve-spring retainer to the stem. Read more

One part is listed for the 2012 Nissan Tiida — QUALCAST 345012.

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

5 Valve Stem Seal parts for the 2012 Nissan Tiida come from 3 brands — ELRING, AJUSA and QUALCAST. The "Popular" part is ELRING 403730.

Part numbers include ELRING 403730, AJUSA 57017900 and ELRING 020020, among others listed above.

This table covers the oil-control solenoids that command the cam phasers. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same. Read more

6 Variable Valve Timing (VVT) Solenoid / Actuator parts for the 2012 Nissan Tiida come from 6 brands — DORMAN, SKP, ROSTRA and 3 other brands. The "Popular" part is DORMAN 918116.

The Economy section: 4 options from DORMAN, SKP, ROSTRA and 1 other brand. DORMAN 918116 is listed in this group.

Standard Replacement: 2 parts, from NTK and STANDARD MOTOR PRODUCTS. A representative part number is NTK VV0035.

Listed part numbers: DORMAN 918116, SKP SK918116 and ROSTRA 790064, plus the other parts above.

This table covers the cam phaser sprockets used by the variable-valve-timing system. Read more

This group shows a single part: FVP VC104.