2013 Nissan Quest Engine Parts

This table covers the connecting rods between each piston and the crankshaft. Read more

One part is listed for the 2013 Nissan Quest — TOPLINE CRD41.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

7 Connecting Rod Bearing parts are listed for the 2013 Nissan Quest, from KING ENGINE BEARINGS, MAHLE / CLEVITE, ENGINETECH and 1 other brand. ENGINETECH BB1011 carries the "Popular" badge.

In the High Performance grade, KING ENGINE BEARINGS supplies 2 parts: engineered beyond original-equipment specification. A representative part number is KING ENGINE BEARINGS CR6775XP.

The Standard Replacement section lists 5 options from MAHLE / CLEVITE, ENGINETECH, KING ENGINE BEARINGS and 1 other brand — built to original-equipment specification. ENGINETECH BB1011 is listed in this group.

This group includes ENGINETECH BB1011, KING ENGINE BEARINGS CR6775XP and KING ENGINE BEARINGS CR6775XPX and the remaining parts above.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

5 Conversion / Lower Gasket Set parts are listed for the 2013 Nissan Quest, from ENGINETECH, APEX, FEL-PRO and 2 other brands. ENGINETECH NI35CSB carries the "Popular" badge.

This group includes ENGINETECH NI35CSB, APEX ACS5062 and FEL-PRO CS26511 and the remaining parts above.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

7 Crankshaft Main Bearing parts for the 2013 Nissan Quest come from 4 brands — KING ENGINE BEARINGS, TOPLINE, ENGINETECH and 1 other brand. The "Popular" part is ENGINETECH BC1012.

The High Performance section: 2 options from KING ENGINE BEARINGS. KING ENGINE BEARINGS MB4058XPX is listed in this group.

Standard Replacement: 5 parts, from TOPLINE, ENGINETECH, MAHLE / CLEVITE and 1 other brand. A representative part number is ENGINETECH BC1012.

Listed part numbers: ENGINETECH BC1012, KING ENGINE BEARINGS MB4058XPX and KING ENGINE BEARINGS MB4058XP, plus the other parts above.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

5 Crankshaft Repair Sleeve parts for the 2013 Nissan Quest come from 5 brands — WJB / INMOTION PARTS, BCA, NATIONAL and 2 other brands. The "Popular" part is WJB / INMOTION PARTS WS99189.

Part numbers include WJB / INMOTION PARTS WS99189, BCA NS99189 and NATIONAL 99189, among others listed above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

16 Crankshaft Seal parts for the 2013 Nissan Quest come from 12 brands — TIMKEN, WJB / INMOTION PARTS, NATIONAL and 9 other brands. The "Popular" part is BCA NS710356.

This table covers the bolts that clamp the cylinder head to the block. Read more

9 Cylinder Head Bolt parts are listed for the 2013 Nissan Quest, from AJUSA, ENGINETECH, APEX and 6 other brands. AJUSA 81047800 carries the "Popular" badge.

Listed part numbers: AJUSA 81047800, ENGINETECH HB182 and APEX AHB534, plus the other parts above.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

13 Cylinder Head Gasket parts are listed for the 2013 Nissan Quest, from APEX, FEL-PRO, AJUSA and 4 other brands. APEX AHG562L carries the "Popular" badge.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

8 Cylinder Head Gasket Set parts are listed for the 2013 Nissan Quest, from ENGINETECH, FEL-PRO, APEX and 3 other brands. ENGINETECH NI35HSD carries the "Popular" badge.

Listed part numbers: ENGINETECH NI35HSD, ENGINETECH NI35HSDWB and APEX AHS5062, plus the other parts above.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

3 Engine Block Heater parts for the 2013 Nissan Quest come from KAT'S HEATERS.

Listed part numbers: KAT'S HEATERS 16600, KAT'S HEATERS 11412 and KAT'S HEATERS 28500.

This table covers the Engine covers. Read more

TECHPRO supplies the 3 Engine Cover parts for the 2013 Nissan Quest.

Part numbers include TECHPRO NI1228129, TECHPRO NI1228130 and TECHPRO NI1228146.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

3 Engine Kit Gasket Set parts are listed for the 2013 Nissan Quest, from AJUSA, ITM ENGINE COMPONENTS and TOPLINE.

Listed part numbers: AJUSA 50519100, ITM ENGINE COMPONENTS 0901403 and TOPLINE CGSD41A.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

4 Exhaust Valve parts for the 2013 Nissan Quest come from 4 brands — ENGINETECH, QUALCAST, SBI and 1 other brand.

This group includes ENGINETECH EM4475, QUALCAST 1013221 and SBI 13221 and the remaining parts above.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

3 Harmonic Balancer parts are listed for the 2013 Nissan Quest, from ATP, DAYCO and DORMAN.

Listed part numbers: ATP 102385, DAYCO PB1682N and DORMAN 594433.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

6 Intake Manifold Gasket parts are listed for the 2013 Nissan Quest, from VICTOR REINZ, FEL-PRO, MAHLE / CLEVITE and 2 other brands. FEL-PRO MS97143 carries the "Popular" badge.

This group includes FEL-PRO MS97143, MAHLE / CLEVITE MS19450 and AJUSA 13241200 and the remaining parts above.

This table covers the Intake Manifold Runner Control Valve solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

3 Intake Manifold Runner Control Valve / Solenoid parts are listed for the 2013 Nissan Quest, from DORMAN, STANDARD MOTOR PRODUCTS and ULTRA-POWER.

Listed part numbers: DORMAN 911506 and STANDARD MOTOR PRODUCTS RCS103, plus the other parts above.

This table covers the gaskets that seal the Intake Plenum. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Intake Plenum Gasket parts for the 2013 Nissan Quest come from 4 brands — AJUSA, APEX, FEL-PRO and 1 other brand.

This group includes AJUSA 01291300, APEX AMS5620 and FEL-PRO MS97220 and the remaining parts above.

This table covers the gaskets that seal the Intake to Exhaust. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: ELRING 878140.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

4 Intake Valve parts for the 2013 Nissan Quest come from 4 brands — ENGINETECH, MAHLE / CLEVITE, QUALCAST and 1 other brand.

Part numbers include ENGINETECH IM4474, MAHLE / CLEVITE 2114601 and QUALCAST 1013220, among others listed above.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

17 Motor Mount parts for the 2013 Nissan Quest come from 8 brands — ANCHOR, DEA / MARMON RIDE CONTROL, PIONEER and 5 other brands. The "Popular" part is SKP SKMA4365HY.

The Economy section lists 3 options from SKP and ULTRA-POWER — the catalog's value-priced group. SKP SKMA4365HY is listed in this group.

Standard Replacement: 14 parts, from ANCHOR, DEA / MARMON RIDE CONTROL, PIONEER and 3 other brands. A representative part number is ANCHOR 9808.

This table covers the Motor Mount kits. Read more

This group shows a single part: ANCHOR 300306.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

51 Oil parts for the 2013 Nissan Quest come from 7 brands — LIQUI MOLY, VALVOLINE, MOBIL and 4 other brands. The "Popular" part is LIQUI MOLY 20228. Grades run from Conventional through Synthetic Blend; Full Synthetic is the most populated section, led by LIQUI MOLY, VALVOLINE, IDEMITSU and 3 other brands.

This table covers the heat exchangers that cool engine oil. Typical signs include oil at the cooler fittings, or coolant that looks like a milkshake. Pressure-test both circuits after a cooler swap — a leak here mixes oil and coolant. Read more

2 Oil Cooler parts for the 2013 Nissan Quest come from 2 brands — DORMAN and STANDARD MOTOR PRODUCTS.

This group includes DORMAN 918484 and STANDARD MOTOR PRODUCTS OCK70.

This table covers the gaskets that seal the Oil Cooler. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 2013 Nissan Quest — AJUSA 01517200.

This table covers the Oil Cooler Mounting kits. Read more

HAYDEN supplies both parts for the 2013 Nissan Quest.

This group includes HAYDEN 238 and HAYDEN 153.

This table covers the seals at the Oil Cooler. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

5 Oil Cooler Seal parts are listed for the 2013 Nissan Quest, from FEL-PRO, BECK/ARNLEY, MAHLE / CLEVITE and 1 other brand. FEL-PRO 72493 carries the "Popular" badge.

Part numbers include FEL-PRO 72493, BECK/ARNLEY 0396688 and FEL-PRO 71863, among others listed above.

This table covers the Oil Dipstick tubes. Read more

2 Oil Dipstick / Tube parts for the 2013 Nissan Quest come from 2 brands — AUTOTECNICA and DORMAN.

This group includes AUTOTECNICA NI1421464 and DORMAN 917445.

This table covers the drain plugs in the oil pan. Read more

6 Oil Drain Plug parts for the 2013 Nissan Quest come from 5 brands — DORMAN, AGS, BECK/ARNLEY and 2 other brands. The "Popular" part is DORMAN 090038.

Listed part numbers: DORMAN 090038, DORMAN 090049 and AGS ODP00011, plus the other parts above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Oil Drain Plug Gasket parts are listed for the 2013 Nissan Quest, from DORMAN, AJUSA, APEX and 1 other brand. DORMAN 097134 carries the "Popular" badge.

Listed part numbers: DORMAN 097134, AJUSA 01140600 and APEX ADP1904, plus the other parts above.

This table covers the caps on the oil filler neck. Read more

5 Oil Filler Cap parts for the 2013 Nissan Quest come from 5 brands — MOTORAD, CALORSTAT, DORMAN and 2 other brands. The "Popular" part is MOTORAD MO107.

Part numbers include MOTORAD MO107, CALORSTAT OC2316 and DORMAN 90200, among others listed above.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

17 Oil Filter parts for the 2013 Nissan Quest come from 13 brands — VARIOUS MFR, BOSCH, WIX and 10 other brands. The "Popular" part is CHAMP / LUBER-FINER PH2876.

The Economy section: 7 options from VARIOUS MFR, CHAMP / LUBER-FINER, BOSCH and 3 other brands. CHAMP / LUBER-FINER PH2876 is listed in this group.

The High Performance / Heavy Duty section lists 2 options from MOBIL and WIX — grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. MOBIL M1108A is listed in this group.

Standard Replacement: 8 parts, from BOSCH, WIX, BECK/ARNLEY and 5 other brands. A representative part number is BOSCH 3300.

This table covers the oil pans that hold the engine's oil sump. Read more

5 Oil Pan parts are listed for the 2013 Nissan Quest, from SPECTRA PREMIUM, ACKOJA, DORMAN and 2 other brands. SPECTRA PREMIUM NSP24A carries the "Popular" badge.

This group includes SPECTRA PREMIUM NSP24A, ACKOJA A380274 and DORMAN 264505 and the remaining parts above.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

9 Oil Pan Gasket parts for the 2013 Nissan Quest come from 5 brands — VICTOR REINZ, APEX, MAHLE / CLEVITE and 2 other brands. The "Popular" part is FEL-PRO OS30696.

This group includes FEL-PRO OS30696, VICTOR REINZ 703141410 and AJUSA 59010400 and the remaining parts above.

This table covers the Oil pumps. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit. Read more

7 Oil Pump parts for the 2013 Nissan Quest come from 7 brands — ENGINETECH, MELLING, AISIN and 4 other brands. The "Popular" part is ENGINETECH EP041.

Part numbers include ENGINETECH EP041, MELLING M356 and AISIN OPN005, among others listed above.

This table covers the pistons that travel in each cylinder. Typical signs include knock, blow-by, or a cylinder that will not hold compression. Piston work is a short-block job. Match bore, pin and ring pack in the notes — not the photo. Read more

2 Piston parts are listed for the 2013 Nissan Quest, from ITM ENGINE COMPONENTS and TOPLINE.

Part numbers include ITM ENGINE COMPONENTS RY6631 and TOPLINE PAD41A.

This table covers the Piston Pin bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

2 Piston Pin Bushing parts for the 2013 Nissan Quest come from 2 brands — ENGINETECH and TOPLINE.

This group includes ENGINETECH EB0156 and TOPLINE PBD34.

This table covers the rings that seal each piston to the cylinder wall. Read more

6 Piston Ring parts are listed for the 2013 Nissan Quest, from HASTINGS MANUFACTURING, SEALED POWER, ENGINETECH and 2 other brands. SEALED POWER E1010KC carries the "Popular" badge.

The Premium section lists 3 options from SEALED POWER, ENGINETECH and MAHLE / CLEVITE — a step above OE specification in materials, tolerances or warranty terms. SEALED POWER E1010KC is listed in this group.

The Standard Replacement section: 3 options from HASTINGS MANUFACTURING and TOPLINE. HASTINGS MANUFACTURING 2C5293 is listed in this group.

Part numbers include SEALED POWER E1010KC, ENGINETECH M95506 and MAHLE / CLEVITE 42295CP, among others listed above.

This table covers the Thrust washers. Read more

3 Thrust Washer parts for the 2013 Nissan Quest come from 3 brands — ENGINETECH, KING ENGINE BEARINGS and MAHLE / CLEVITE.

This group includes ENGINETECH TW1012, KING ENGINE BEARINGS TW271AM and MAHLE / CLEVITE TW678S.

This table covers the Timing Cam sprockets. Read more

5 Timing Cam Sprocket parts for the 2013 Nissan Quest come from 5 brands — CLOYES, INA, MELLING and 2 other brands. The "Popular" part is CLOYES S948T.

Listed part numbers: CLOYES S948T, INA ZSS1232 and MELLING S1257, plus the other parts above.

This table covers the timing chains that keep the cams in time with the crank. Read more

9 Timing Chain parts are listed for the 2013 Nissan Quest, from MELLING, S.A. GEAR, CLOYES and 2 other brands. MELLING 721 carries the "Popular" badge.

Listed part numbers: MELLING 721, S.A. GEAR RC1038 and CLOYES C721F, plus the other parts above.

This table covers kits that group a timing chain with the related tensioners and guides. Read more

18 Timing Chain & Component Kit parts for the 2013 Nissan Quest come from 8 brands — MELLING, CLOYES, S.A. GEAR and 5 other brands. The "Popular" part is CLOYES 90730SA.

The Economy section: 9 options from S.A. GEAR, MELLING, PREFERRED COMPONENTS INC and 2 other brands. ITM ENGINE COMPONENTS 05390752 is listed in this group.

Standard Replacement: 9 parts, from CLOYES, MELLING, ENGINETECH and 1 other brand. A representative part number is CLOYES 90730SA.