2017 Nissan Quest Engine Parts

This table covers the connecting rods between each piston and the crankshaft. Read more

One part is listed for the 2017 Nissan Quest — TOPLINE CRD41.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

7 Connecting Rod Bearing parts are listed for the 2017 Nissan Quest, from KING ENGINE BEARINGS, MAHLE / CLEVITE, ENGINETECH and 1 other brand. ENGINETECH BB1011 carries the "Popular" badge.

In the High Performance grade, KING ENGINE BEARINGS supplies 2 parts: engineered beyond original-equipment specification. A representative part number is KING ENGINE BEARINGS CR6775XP.

The Standard Replacement section lists 5 options from MAHLE / CLEVITE, ENGINETECH, KING ENGINE BEARINGS and 1 other brand — built to original-equipment specification. ENGINETECH BB1011 is listed in this group.

This group includes ENGINETECH BB1011, KING ENGINE BEARINGS CR6775XP and KING ENGINE BEARINGS CR6775XPX and the remaining parts above.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

6 Conversion / Lower Gasket Set parts are listed for the 2017 Nissan Quest, from APEX, FEL-PRO, AJUSA and 3 other brands. APEX ACS5062 carries the "Popular" badge.

Part numbers include APEX ACS5062, FEL-PRO CS26511 and AJUSA 54304900, among others listed above.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

7 Crankshaft Main Bearing parts for the 2017 Nissan Quest come from 4 brands — KING ENGINE BEARINGS, TOPLINE, ENGINETECH and 1 other brand. The "Popular" part is ENGINETECH BC1012.

The High Performance section: 2 options from KING ENGINE BEARINGS. KING ENGINE BEARINGS MB4058XPX is listed in this group.

Standard Replacement: 5 parts, from TOPLINE, ENGINETECH, MAHLE / CLEVITE and 1 other brand. A representative part number is ENGINETECH BC1012.

Listed part numbers: ENGINETECH BC1012, KING ENGINE BEARINGS MB4058XPX and KING ENGINE BEARINGS MB4058XP, plus the other parts above.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

4 Crankshaft Repair Sleeve parts for the 2017 Nissan Quest come from 4 brands — BCA, NATIONAL, TIMKEN and 1 other brand.

Part numbers include BCA NS99189, NATIONAL 99189 and TIMKEN KWK99189, among others listed above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

14 Crankshaft Seal parts for the 2017 Nissan Quest come from 11 brands — TIMKEN, WJB / INMOTION PARTS, NATIONAL and 8 other brands. The "Popular" part is BCA NS710356.

This table covers the bolts that clamp the cylinder head to the block. Read more

5 Cylinder Head Bolt parts are listed for the 2017 Nissan Quest, from ENGINETECH, AJUSA, APEX and 2 other brands. ENGINETECH HB182 carries the "Popular" badge.

Part numbers include ENGINETECH HB182, AJUSA 81047800 and APEX AHB534, among others listed above.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

13 Cylinder Head Gasket parts are listed for the 2017 Nissan Quest, from APEX, FEL-PRO, AJUSA and 4 other brands. APEX AHG562L carries the "Popular" badge.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

6 Cylinder Head Gasket Set parts are listed for the 2017 Nissan Quest, from ENGINETECH, FEL-PRO, APEX and 1 other brand. ENGINETECH NI35HSD carries the "Popular" badge.

Part numbers include ENGINETECH NI35HSD, ENGINETECH NI35HSDWB and APEX AHS5062, among others listed above.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

3 Engine Block Heater parts for the 2017 Nissan Quest come from KAT'S HEATERS.

This group includes KAT'S HEATERS 16600, KAT'S HEATERS 11412 and KAT'S HEATERS 28500.

This table covers the Engine covers. Read more

TECHPRO supplies the 3 Engine Cover parts for the 2017 Nissan Quest.

Listed part numbers: TECHPRO NI1228129, TECHPRO NI1228130 and TECHPRO NI1228146.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

2 Engine Kit Gasket Set parts are listed for the 2017 Nissan Quest, from AJUSA and TOPLINE.

This group includes AJUSA 50519100 and TOPLINE CGSD41A.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

2 Exhaust Valve parts for the 2017 Nissan Quest come from 2 brands — SBI and TOPLINE.

Part numbers include SBI 13221 and TOPLINE EVD41HRL.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

3 Harmonic Balancer parts are listed for the 2017 Nissan Quest, from ATP, DAYCO and DORMAN.

Part numbers include ATP 102385, DAYCO PB1682N and DORMAN 594433.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Intake Manifold Gasket parts are listed for the 2017 Nissan Quest, from MAHLE / CLEVITE, AJUSA, APEX and 2 other brands. MAHLE / CLEVITE MS19450 carries the "Popular" badge.

This group includes MAHLE / CLEVITE MS19450, AJUSA 13241200 and APEX AMS5621 and the remaining parts above.

This table covers the Intake Manifold Runner Control Valve solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

3 Intake Manifold Runner Control Valve / Solenoid parts are listed for the 2017 Nissan Quest, from DORMAN, STANDARD MOTOR PRODUCTS and ULTRA-POWER.

This group includes DORMAN 911506 and STANDARD MOTOR PRODUCTS RCS103 and the remaining parts above.

This table covers the gaskets that seal the Intake Plenum. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Intake Plenum Gasket parts for the 2017 Nissan Quest come from 4 brands — AJUSA, APEX, FEL-PRO and 1 other brand.

Part numbers include AJUSA 01291300, APEX AMS5620 and FEL-PRO MS97220, among others listed above.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

12 Motor Mount parts for the 2017 Nissan Quest come from 6 brands — ANCHOR, SKP, DEA / MARMON RIDE CONTROL and 3 other brands. The "Popular" part is SKP SKMA4365HY.

The Economy section lists 3 options from SKP and ULTRA-POWER — the catalog's value-priced group. SKP SKMA4365HY is listed in this group.

Standard Replacement: 9 parts, from ANCHOR, DEA / MARMON RIDE CONTROL, PIONEER and 1 other brand. A representative part number is ANCHOR 9808.

This table covers the Motor Mount kits. Read more

This group shows a single part: ANCHOR 300307.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

36 Oil parts for the 2017 Nissan Quest come from 6 brands — LIQUI MOLY, VALVOLINE, MOBIL and 3 other brands. The "Popular" part is LIQUI MOLY 22044. Grades run from Full Synthetic through High Mileage (>75,000 Miles); Full Synthetic is the most populated section, led by LIQUI MOLY, VALVOLINE, PENTOSIN and 3 other brands.

This table covers the heat exchangers that cool engine oil. Typical signs include oil at the cooler fittings, or coolant that looks like a milkshake. Pressure-test both circuits after a cooler swap — a leak here mixes oil and coolant. Read more

2 Oil Cooler parts for the 2017 Nissan Quest come from 2 brands — DORMAN and STANDARD MOTOR PRODUCTS.

Listed part numbers: DORMAN 918484 and STANDARD MOTOR PRODUCTS OCK70.

This table covers the gaskets that seal the Oil Cooler. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 2017 Nissan Quest — AJUSA 01517200.

This table covers the seals at the Oil Cooler. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Oil Cooler Seal parts are listed for the 2017 Nissan Quest, from FEL-PRO, BECK/ARNLEY and MAHLE / CLEVITE.

Listed part numbers: BECK/ARNLEY 0396688, FEL-PRO 72493 and FEL-PRO 71863, plus the other parts above.

This table covers the Oil Dipstick tubes. Read more

2 Oil Dipstick / Tube parts for the 2017 Nissan Quest come from 2 brands — AUTOTECNICA and DORMAN.

Part numbers include AUTOTECNICA NI1421464 and DORMAN 917445.

This table covers the drain plugs in the oil pan. Read more

6 Oil Drain Plug parts for the 2017 Nissan Quest come from 5 brands — DORMAN, AGS, BECK/ARNLEY and 2 other brands. The "Popular" part is DORMAN 090038.

This group includes DORMAN 090038, DORMAN 090049 and AGS ODP00011 and the remaining parts above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Oil Drain Plug Gasket parts are listed for the 2017 Nissan Quest, from DORMAN, AJUSA, APEX and 1 other brand. DORMAN 097134 carries the "Popular" badge.

Part numbers include DORMAN 097134, AJUSA 01140600 and APEX ADP1904, among others listed above.

This table covers the caps on the oil filler neck. Read more

5 Oil Filler Cap parts for the 2017 Nissan Quest come from 5 brands — MOTORAD, CALORSTAT, DORMAN and 2 other brands. The "Popular" part is MOTORAD MO107.

Part numbers include MOTORAD MO107, CALORSTAT OC2316 and DORMAN 90200, among others listed above.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

18 Oil Filter parts for the 2017 Nissan Quest come from 14 brands — VARIOUS MFR, BOSCH, WIX and 11 other brands. The "Popular" part is CHAMP / LUBER-FINER PH2876.

The Economy section: 7 options from VARIOUS MFR, CHAMP / LUBER-FINER, BOSCH and 3 other brands. CHAMP / LUBER-FINER PH2876 is listed in this group.

The High Performance / Heavy Duty section lists 2 options from MOBIL and WIX — grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. MOBIL M1108A is listed in this group.

Standard Replacement: 9 parts, from BOSCH, MOTORCRAFT, WIX and 6 other brands. A representative part number is BOSCH 3300.

This table covers the oil pans that hold the engine's oil sump. Read more

5 Oil Pan parts are listed for the 2017 Nissan Quest, from SKP, ACKOJA, DORMAN and 2 other brands. SKP SK264465 carries the "Popular" badge.

Part numbers include SKP SK264465, ACKOJA A380274 and DORMAN 264505, among others listed above.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

9 Oil Pan Gasket parts for the 2017 Nissan Quest come from 5 brands — VICTOR REINZ, APEX, MAHLE / CLEVITE and 2 other brands. The "Popular" part is FEL-PRO OS30696.

Listed part numbers: FEL-PRO OS30696, VICTOR REINZ 703141410 and AJUSA 59010400, plus the other parts above.

This table covers the Oil pumps. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit. Read more

2 Oil Pump parts for the 2017 Nissan Quest come from 2 brands — ASTEMO / HITACHI and TOPLINE.

Listed part numbers: ASTEMO / HITACHI OUP0037 and TOPLINE OPD41M.

This table covers the pistons that travel in each cylinder. Typical signs include knock, blow-by, or a cylinder that will not hold compression. Piston work is a short-block job. Match bore, pin and ring pack in the notes — not the photo. Read more

One part is listed for the 2017 Nissan Quest — ENGINETECH K16016P.

This table covers the Piston Pin bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

2 Piston Pin Bushing parts for the 2017 Nissan Quest come from 2 brands — ENGINETECH and TOPLINE.

Listed part numbers: ENGINETECH EB0156 and TOPLINE PBD34.

This table covers the Thrust washers. Read more

3 Thrust Washer parts for the 2017 Nissan Quest come from 3 brands — ENGINETECH, KING ENGINE BEARINGS and MAHLE / CLEVITE.

This group includes ENGINETECH TW1012, KING ENGINE BEARINGS TW271AM and MAHLE / CLEVITE TW678S.

This table covers the timing chains that keep the cams in time with the crank. Read more

6 Timing Chain parts are listed for the 2017 Nissan Quest, from S.A. GEAR, CLOYES, MELLING and 1 other brand. MELLING 721 carries the "Popular" badge.

This group includes MELLING 721, S.A. GEAR RC1038 and CLOYES C721F and the remaining parts above.

This table covers kits that group a timing chain with the related tensioners and guides. Read more

5 Timing Chain & Component Kit parts for the 2017 Nissan Quest come from 3 brands — S.A. GEAR, INA and TOPLINE. The "Popular" part is S.A. GEAR 76280.

The Economy section: 3 options from S.A. GEAR. S.A. GEAR 76280 is listed in this group.

Standard Replacement: 2 parts, from INA and TOPLINE. A representative part number is INA ZC90730SX.

This group includes S.A. GEAR 76280, S.A. GEAR 76280S and S.A. GEAR 76280SW and the remaining parts above.

This table covers the guides and dampers that keep the timing chain on its path. Read more

8 Timing Chain Guide / Damper parts are listed for the 2017 Nissan Quest, from S.A. GEAR, INA, CLOYES and 2 other brands. S.A. GEAR 71009 carries the "Popular" badge.

Part numbers include S.A. GEAR 71009, S.A. GEAR 91147 and CLOYES 95594, among others listed above.

This table covers the tensioners that keep the timing chain taut. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

14 Timing Chain Tensioner parts for the 2017 Nissan Quest come from 5 brands — S.A. GEAR, CLOYES, INA and 2 other brands. The "Popular" part is S.A. GEAR 9441.

This table covers the gaskets that seal the Timing Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Timing Cover Gasket parts for the 2017 Nissan Quest come from 3 brands — MAHLE / CLEVITE, APEX and ULTRA-POWER.

This group includes APEX ATC5340, MAHLE / CLEVITE B33343 and MAHLE / CLEVITE B33342 and the remaining parts above.

This table covers the wear sleeves used to restore a Timing Cover seal surface. Read more

This group shows a single part: SKF 99189.

This table covers the seals at the Timing Cover. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Timing Cover Seal parts for the 2017 Nissan Quest come from 2 brands — MAHLE / CLEVITE and SKF.

Part numbers include MAHLE / CLEVITE 67689 and SKF 18857.

This table covers the crankshaft sprockets that drive the timing chain or belt. Read more

6 Timing Crank Sprocket parts for the 2017 Nissan Quest come from 5 brands — INA, MELLING, S.A. GEAR and 2 other brands. The "Popular" part is MELLING S1221.

Listed part numbers: MELLING S1221 and CLOYES S947, plus the other parts above.

This table covers the Torque Strut mounts. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

8 Torque Strut Mount parts are listed for the 2017 Nissan Quest, from ANCHOR, DEA / MARMON RIDE CONTROL, WESTAR and 2 other brands. SKP SKM9747 carries the "Popular" badge.

Economy: 1 part, from SKP. A representative part number is SKP SKM9747.

The Standard Replacement section: 7 options from ANCHOR, DEA / MARMON RIDE CONTROL, WESTAR and 1 other brand. ANCHOR 9747 is listed in this group.

Listed part numbers: SKP SKM9747, ANCHOR 9747 and ANCHOR 9551, plus the other parts above.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

11 Valve Cover Gasket parts for the 2017 Nissan Quest come from 6 brands — VICTOR REINZ, APEX, BECK/ARNLEY and 3 other brands. The "Popular" part is APEX AVC562.

This table covers the pressed-in bronze and cast-iron guides that align valve stems. Typical signs include oil smoke on startup, a guide that has gone oval, or a valve that no longer seats quietly. Guides are a machine-shop fit. Confirm stem diameter in the notes before ordering. Read more

4 Valve Guide parts for the 2017 Nissan Quest come from 2 brands — QUALCAST and TOPLINE.

Listed part numbers: QUALCAST 308217, QUALCAST 308190 and TOPLINE EVGD30, plus the other parts above.

This table covers the keepers that lock each valve-spring retainer to the stem. Read more

2 Valve Spring Retainer Keeper parts are listed for the 2017 Nissan Quest, from MELLING and QUALCAST.

Part numbers include MELLING VL730 and QUALCAST 345012.

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

6 Valve Stem Seal parts for the 2017 Nissan Quest come from 6 brands — ENGINETECH, FEL-PRO, APEX and 3 other brands. The "Popular" part is ENGINETECH S505V.

Listed part numbers: ENGINETECH S505V, FEL-PRO SS72821 and APEX AVS5029, plus the other parts above.

This table covers the oil-control solenoids that command the cam phasers. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same. Read more

11 Variable Valve Timing (VVT) Solenoid / Actuator parts for the 2017 Nissan Quest come from 9 brands — HOLSTEIN, STANDARD MOTOR PRODUCTS, DORMAN and 6 other brands. The "Popular" part is DORMAN 916725.

The Economy section: 4 options from HOLSTEIN, DORMAN and WALKER PRODUCTS. DORMAN 916725 is listed in this group.

Standard Replacement: 7 parts, from STANDARD MOTOR PRODUCTS, ASTEMO / HITACHI, ACKOJA and 3 other brands. A representative part number is ASTEMO / HITACHI VTS0016.

This table covers the cam phaser sprockets used by the variable-valve-timing system. Read more

3 Variable Valve Timing (VVT) Sprocket parts for the 2017 Nissan Quest come from 2 brands — ASTEMO / HITACHI and WELLS.

Listed part numbers: ASTEMO / HITACHI VTG0014, ASTEMO / HITACHI VTG0023 and WELLS 3T1090.