2013 Nissan Tsuru Ignition Parts

Engine:
1.6L L4

This page lists 27 ignition parts for the 2013 Nissan Tsuru, across 8 part types, covering the 1.6L L4 engine. Every part shows its brand, manufacturer part number and fitment notes.

On the 2013 Nissan Tsuru, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules. Most of the listed parts are Ignition Coil (7 parts), Distributor Cap (4 parts) and Distributor Rotor (4 parts). The other 5 part types cover the remaining 12 parts.

Camshaft Position Sensor

Full Service Kit

Brand Part Number Markets Notes Buy
WALKER PRODUCTS 23591443
🇲🇽 MX
FSK
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
WALKER PRODUCTS 2351443
🇲🇽 MX
Sensor OnlyTerminal Type: Blade
View on
Amazon

This table covers the sensors that report camshaft position to the ECU. Typical signs include a stall, a no-start, or a code for cam or crank correlation. Check the connector and the reluctor gap before replacing the sensor.

Crankshaft Position Sensor

Brand Part Number Markets Notes Buy
STANDARD MOTOR PRODUCTS PC196
🇲🇽 MX
View on
Amazon
WALKER PRODUCTS 2351443
🇲🇽 MX
Sensor OnlyTerminal Type: Blade
View on
Amazon
WELLS 5S1866
🇲🇽 MX
View on
Amazon

This table covers the sensors that report crankshaft position and engine speed. Typical signs include a stall, a no-start, or a code for cam or crank correlation. Check the connector and the reluctor gap before replacing the sensor.

Distributor

Brand Part Number Markets Notes Buy
SKP SKDINS23
🇲🇽 MX
External Coil
View on
Amazon

This table covers the distributors that route spark.

Distributor Cap

Economy

Brand Part Number Markets Notes Buy
STANDARD MOTOR PRODUCTS JH239T
🇲🇽 MX
T-Series
View on
Amazon
UNITED MOTOR PRODUCTS IC491
🇲🇽 MX
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
STANDARD MOTOR PRODUCTS JH239
🇲🇽 MX
View on
Amazon
WALKER PRODUCTS 9251062
🇲🇽 MX
View on
Amazon

This table covers the Distributor caps. Typical signs include a leak at the neck, a cap that will not hold pressure, or a missing tether. Match the pressure rating or thread in the notes — radiator, reservoir and fuel caps are not interchangeable.

Distributor Rotor

Economy

Brand Part Number Markets Notes Buy
STANDARD MOTOR PRODUCTS JR178T
🇲🇽 MX
T-SeriesColor/Finish: Brown
View on
Amazon
UNITED MOTOR PRODUCTS IR178
🇲🇽 MX
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
STANDARD MOTOR PRODUCTS JR178
🇲🇽 MX
Contact Material: Aluminum
View on
Amazon
WALKER PRODUCTS 9261036
🇲🇽 MX
View on
Amazon

This table covers the Distributor rotors. Typical signs include shudder under braking, or a lip at the outer edge. Do not put new pads on a rotor that is below minimum thickness.

Ignition Coil

Economy

Brand Part Number Markets Notes Buy
SKP Popular SKIC176
🇲🇽 MX
View on
Amazon
B&B BB5118
🇲🇽 MX
View on
Amazon
SPECTRA PREMIUM C664
🇲🇽 MX
Packwith Hitachi Design
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
WALKER PRODUCTS Popular 9201086
🇲🇽 MX
Single Coil
View on
Amazon
STANDARD MOTOR PRODUCTS UF731
🇲🇽 MX
View on
Amazon
UNITED MOTOR PRODUCTS C731
🇲🇽 MX
View on
Amazon
WELLS 5C1237
🇲🇽 MX
View on
Amazon

This table covers the coils that fire each spark plug. Typical signs include a misfire that follows one cylinder, a snap in damp weather, or a coil that is swollen or cracked. Swap a suspect coil with a neighbor to confirm, then replace boots that tore on the way off.

Spark Plug

Double Platinum (lasts up to 3x longer than Copper / Nickel)

Brand Part Number Markets Notes Buy
ACDELCO 41800
🇺🇸 US 🇨🇦 CA
GM Original EquipmentDouble Platinum
Fitment notes — ACDELCO 41800
GM Original EquipmentDouble PlatinumPre-Set Gap: 0.045"
OE-Recommended Gap: 0.044" (IN)
View on
Amazon

Platinum (lasts up to 2x longer than Copper / Nickel)

Brand Part Number Markets Notes Buy
ACDELCO 5
🇺🇸 US 🇨🇦 CA
ProfessionalRapidfire
Fitment notes — ACDELCO 5
ProfessionalRapidfirePre-Set Gap: 0.045"
OE-Recommended Gap: 0.044" (IN)
View on
Amazon

This table covers the spark plugs for this engine. Typical signs include misfire under load, rough idle, or a flashing check-engine light. Verify the gap even on pre-gapped plugs, and replace coil boots that come off a high-mileage engine.

Spark Plug Wire

Economy

Brand Part Number Markets Notes Buy
STANDARD MOTOR PRODUCTS 3796
🇲🇽 MX
SetFederal Wire
View on
Amazon

Premium

Brand Part Number Markets Notes Buy
STANDARD MOTOR PRODUCTS 9545
🇲🇽 MX
SetStandard® Premium
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
STANDARD MOTOR PRODUCTS 29545
🇲🇽 MX
Pro SeriesSet
View on
Amazon
WALKER PRODUCTS 9241127
🇲🇽 MX
Direct FitSet
Fitment notes — WALKER PRODUCTS 9241127
Direct FitSetSuppression Core
View on
Amazon

This table covers the Spark Plug wires.

Buying Ignition Parts for a 2013 Nissan Tsuru

On this vehicle, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules.

  • Confirm you have the 1.6L L4 engine — every part on this page is matched to it.
  • Read the notes on each row for position, trim and spec qualifiers before you order.
  • Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
  • Cross-reference the manufacturer part number against your old part or a service-manual listing.

Start with the largest groups on this page: Ignition Coil and Distributor Cap .

Frequently Asked Questions

How many ignition parts fit the 2013 Nissan Tsuru?

Our catalog currently lists 27 ignition parts for the 2013 Nissan Tsuru across 8 subcategories and 8 brands, covering the 1.6L L4 engine. Each part is matched to the engine(s) it fits.

What are the signs of ignition problems on a 2013 Nissan Tsuru?

Common symptoms include misfires under load, rough idle, flashing check-engine light, or poor starting in damp weather. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.

What spark-plug gap is listed for the 2013 Nissan Tsuru?

Notes on this page include pre-set gaps of 0.044" and 0.045". Still verify against spec — even “pre-gapped” plugs should be checked before they go in.

What should I replace at the same time?

Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.

What do the market flags (US, CA, MX) on each part mean?

They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2013 Nissan Tsuru was originally sold in the US, the safest choice is a part marked for the US market.

How do I make sure a part fits my 2013 Nissan Tsuru?

Every part on this page is matched to the 1.6L L4 engine. Then gap matters even on “pre-gapped” plugs — verify against spec, and replace coil boots when they come off a high-mileage engine. The notes column carries position and trim qualifiers where they apply.

Other Parts for the 2013 Nissan Tsuru

Ignition Parts for Other Nissan Tsuru Years

Switch vehicle or jump to a subcategory

Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.