This page lists 11 engine parts for the 2014 Nissan Cabstar, across 9 part types, covering the 2.5L L4 DIESEL Turbocharged engine. Every part shows its brand, manufacturer part number and fitment notes.
On the 2014 Nissan Cabstar, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components. 5 parts of the 11 listed are Crankshaft Seal (2 parts), Oil Cooler Mounting Kit (2 parts) and Exhaust Valve (1 part). The other 6 part types cover the remaining 6 parts.
Every part on this page is matched to the 2.5L L4 DIESEL Turbocharged — the only engine offered in the 2014 Nissan Cabstar.
The most listed brands for 2014 Nissan Cabstar engine parts are ELRING (7 parts), QUALCAST (2 parts) and HAYDEN (2 parts).
Each part number listed for the 2014 Nissan Cabstar opens a page with every vehicle that part fits.
Crankshaft Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ELRING | 903070 | 🇲🇽 MX | Inner Diameter [mm]: 50Material: FPM (Fluoride Rubber) | View on Amazon |
| ELRING | 587460 | 🇲🇽 MX | Height [MM]: 8,5Material: FPM (fluoride rubber)/ACM (polyacrylate rubber) | View on Amazon |
This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
ELRING supplies both parts for the 2014 Nissan Cabstar.
Part numbers include ELRING 903070 and ELRING 587460.
Exhaust Valve
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| QUALCAST | 1030843 | 🇲🇽 MX | 1.023 Head DIA. 0.234 Stem. 4.155 OAL. | View on Amazon |
This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one.
One part is listed for the 2014 Nissan Cabstar — QUALCAST 1030843.
Intake Manifold Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ELRING | 517600 | 🇲🇽 MX | Material: Metaloseal | View on Amazon |
This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
This group shows a single part: ELRING 517600.
Intake Valve
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| QUALCAST | 1030844 | 🇲🇽 MX | 1.125 Head DIA. 0.235 Stem. 4.172 OAL. | View on Amazon |
This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one.
One part is listed for the 2014 Nissan Cabstar — QUALCAST 1030844.
Oil Cooler Mounting Kit
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| HAYDEN | 238 | 🇲🇽 MX | Rubber Block Mounting Kit for Heavy Duty Oil Cooler | View on Amazon |
| HAYDEN | 153 | 🇲🇽 MX | Metal Mounting Bracket Kit for Heavy Duty Oil Cooler | View on Amazon |
This table covers the Oil Cooler Mounting kits.
2 Oil Cooler Mounting Kit parts for the 2014 Nissan Cabstar come from HAYDEN.
This group includes HAYDEN 238 and HAYDEN 153.
Oil Drain Plug
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ELRING | 587290 | 🇲🇽 MX | without Seal RingBolt Head-/Nut Design: Male Hex | View on Amazon |
This table covers the drain plugs in the oil pan.
One part is listed for the 2014 Nissan Cabstar — ELRING 587290.
Oil Drain Plug Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ELRING | 776327 | 🇲🇽 MX | Material: CopperOuter Diameter [MM]: 17,5 | View on Amazon |
This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
This group shows a single part: ELRING 776327.
Turbocharger Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ELRING | 964390 | 🇲🇽 MX | Exhaust Manifold | View on Amazon |
This table covers the gaskets that seal the Turbocharger. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
This group shows a single part: ELRING 964390.
Turbocharger Mounting Hardware
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ELRING | 964490 | 🇲🇽 MX | with gaskets/sealswith Mounting Manual | View on Amazon |
This table covers the fasteners that mount the turbocharger.
This group shows a single part: ELRING 964490.
Buying Engine Parts for a 2014 Nissan Cabstar
On this vehicle, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components.
- Confirm you have the 2.5L L4 DIESEL Turbocharged engine — every part on this page is matched to it.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Crankshaft Seal and Oil Cooler Mounting Kit .
Frequently Asked Questions
How many engine parts fit the 2014 Nissan Cabstar?
Our catalog currently lists 11 engine parts for the 2014 Nissan Cabstar across 9 subcategories and 3 brands, covering the 2.5L L4 DIESEL Turbocharged engine. Each part is matched to the engine(s) it fits.
What are the signs of engine problems on a 2014 Nissan Cabstar?
Common symptoms include oil spots under the vehicle, blue or white exhaust smoke, ticking from the valvetrain, or coolant mysteriously disappearing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2014 Nissan Cabstar was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 2014 Nissan Cabstar?
Every part on this page is matched to the 2.5L L4 DIESEL Turbocharged engine. Then engine hard parts are unforgiving of guesswork — confirm the casting or engine code before ordering, because one model year can hide two different blocks. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 2014 Nissan Cabstar
Engine Parts for Other Nissan Cabstar Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.