2014 Nissan NV2500 Engine Parts

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

10 Connecting Rod Bearing parts are listed for the 2014 Nissan NV2500, from KING ENGINE BEARINGS, TOPLINE, ENGINETECH and 3 other brands. ENGINETECH BB1219 carries the "Popular" badge.

In the High Performance grade, KING ENGINE BEARINGS supplies 2 parts: engineered beyond original-equipment specification. A representative part number is KING ENGINE BEARINGS CR8051XP.

The Standard Replacement section lists 1 option from TOPLINE — built to original-equipment specification. TOPLINE RBD46 is listed in this group.

7 ungrouped parts are not assigned to a grade, with the same engine-level match.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

12 Conversion / Lower Gasket Set parts are listed for the 2014 Nissan NV2500, from APEX, ENGINETECH, FEL-PRO and 4 other brands. APEX ACS5057 carries the "Popular" badge.

This table covers the crankshafts that turn piston motion into rotation. Read more

One part is listed for the 2014 Nissan NV2500 — ENGINETECH 838500.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

12 Crankshaft Main Bearing parts for the 2014 Nissan NV2500 come from 6 brands — KING ENGINE BEARINGS, TOPLINE, ENGINETECH and 3 other brands. The "Popular" part is TOPLINE TWD47.

The High Performance section: 2 options from KING ENGINE BEARINGS. KING ENGINE BEARINGS MB5770XPX is listed in this group.

Standard Replacement: 2 parts, from TOPLINE. A representative part number is TOPLINE TWD47.

8 further parts sit outside the graded sections, with the same engine-level match.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

5 Crankshaft Repair Sleeve parts for the 2014 Nissan NV2500 come from 3 brands — NATIONAL, WJB / INMOTION PARTS and BCA.

Part numbers include BCA NS99189, NATIONAL 99189 and NATIONAL 99181, among others listed above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

26 Crankshaft Seal parts for the 2014 Nissan NV2500 come from 12 brands — SCHAEFFLER, NATIONAL, WJB / INMOTION PARTS and 9 other brands. The "Popular" part is FEL-PRO BS40694. A list this long means Crankshaft Seal applications vary by configuration — the notes carry the qualifiers.

This table covers the bolts that clamp the cylinder head to the block. Read more

16 Cylinder Head Bolt parts are listed for the 2014 Nissan NV2500, from AJUSA, APEX, ENGINETECH and 6 other brands. AJUSA 81047800 carries the "Popular" badge.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

25 Cylinder Head Gasket parts are listed for the 2014 Nissan NV2500, from APEX, FEL-PRO, ITM ENGINE COMPONENTS and 5 other brands. APEX AHG555L carries the "Popular" badge.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

13 Cylinder Head Gasket Set parts are listed for the 2014 Nissan NV2500, from FEL-PRO, APEX, ENGINETECH and 3 other brands. APEX AHS5057 carries the "Popular" badge.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

2 Engine Block Heater parts for the 2014 Nissan NV2500 come from KAT'S HEATERS. 1 part fits every engine; the other 1 is engine-specific.

Listed part numbers: KAT'S HEATERS 11412 and KAT'S HEATERS 28500.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

7 Engine Kit Gasket Set parts are listed for the 2014 Nissan NV2500, from AJUSA, ENGINETECH, TOPLINE and 1 other brand.

This group includes AJUSA 50433600, AJUSA 50556800 and ENGINETECH NI40K1 and the remaining parts above.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

6 Exhaust Valve parts for the 2014 Nissan NV2500 come from 5 brands — TOPLINE, ENGINETECH, ITM ENGINE COMPONENTS and 2 other brands. 2 parts fit every engine; the other 4 are engine-specific.

Part numbers include ENGINETECH EM1013, ITM ENGINE COMPONENTS RX9613 and QUALCAST 1003030, among others listed above.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

4 Harmonic Balancer parts are listed for the 2014 Nissan NV2500, from ATP and DAYCO.

This group includes ATP 102414, ATP 102471 and DAYCO PB1664N and the remaining parts above.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

12 Intake Manifold Gasket parts are listed for the 2014 Nissan NV2500, from VICTOR REINZ, APEX, BECK/ARNLEY and 3 other brands. APEX AMS5550 carries the "Popular" badge.

This table covers the Intake Manifold Runner Control Valve solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

2 Intake Manifold Runner Control Valve / Solenoid parts are listed for the 2014 Nissan NV2500, from DORMAN and STANDARD MOTOR PRODUCTS.

Part numbers include DORMAN 911506 and STANDARD MOTOR PRODUCTS RCS103.

This table covers the gaskets that seal the Intake Plenum. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Intake Plenum Gasket parts for the 2014 Nissan NV2500 come from 5 brands — FEL-PRO, AJUSA, APEX and 2 other brands. The "Popular" part is FEL-PRO MS96943.

Listed part numbers: FEL-PRO MS96943, AJUSA 01149900 and APEX AMS5551, plus the other parts above.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

5 Intake Valve parts for the 2014 Nissan NV2500 come from 4 brands — TOPLINE, ENGINETECH, ITM ENGINE COMPONENTS and 1 other brand. 2 parts fit every engine; the other 3 are engine-specific.

This group includes ENGINETECH IM1012, ITM ENGINE COMPONENTS RV9963 and QUALCAST 1003029 and the remaining parts above.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

10 Motor Mount parts for the 2014 Nissan NV2500 come from 6 brands — ANCHOR, BECK/ARNLEY, DEA / MARMON RIDE CONTROL and 3 other brands. The "Popular" part is SKP SKM9506.

The Economy section lists 1 option from SKP — the catalog's value-priced group. SKP SKM9506 is listed in this group.

Standard Replacement: 4 parts, from ANCHOR, BECK/ARNLEY, DEA / MARMON RIDE CONTROL and 1 other brand. A representative part number is ANCHOR 9506.

5 further parts sit outside the graded sections, with the same engine-level match.

This table covers the Motor Mount kits. Read more

3 Motor Mount Kit parts for the 2014 Nissan NV2500 come from 2 brands — ANCHOR and WESTAR.

Part numbers include ANCHOR 300143, ANCHOR 300142 and WESTAR ETK090.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

50 Oil parts for the 2014 Nissan NV2500 come from 7 brands — LIQUI MOLY, VALVOLINE, MOBIL and 4 other brands. The "Popular" part is LIQUI MOLY 20228. They are grouped as Conventional, Full Synthetic, High Mileage (>75,000 Miles) and Synthetic Blend, with Full Synthetic the largest group at 37 parts from LIQUI MOLY, VALVOLINE, MOBIL and 3 other brands.

This table covers the heat exchangers that cool engine oil. Typical signs include oil at the cooler fittings, or coolant that looks like a milkshake. Pressure-test both circuits after a cooler swap — a leak here mixes oil and coolant. Read more

This group shows a single part: NISSENS 91435.

This table covers the gaskets that seal the Oil Cooler. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 2014 Nissan NV2500 — AJUSA 01517200.

This table covers the Oil Cooler Mounting kits. Read more

HAYDEN supplies both parts for the 2014 Nissan NV2500. All of them fit every engine offered in the 2014 NV2500.

Listed part numbers: HAYDEN 238 and HAYDEN 153.

This table covers the seals at the Oil Cooler. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Oil Cooler Seal parts are listed for the 2014 Nissan NV2500, from FEL-PRO, BECK/ARNLEY and VICTOR REINZ. All of them fit every engine offered in the 2014 NV2500.

This group includes BECK/ARNLEY 0396616, FEL-PRO 72493 and FEL-PRO 73233 and the remaining parts above.

This table covers the drain plugs in the oil pan. Read more

6 Oil Drain Plug parts for the 2014 Nissan NV2500 come from 5 brands — DORMAN, AGS, BECK/ARNLEY and 2 other brands. The "Popular" part is DORMAN 090038. Every part fits both the 4.0L V6 and the 5.6L V8.

Part numbers include DORMAN 090038, DORMAN 090049 and AGS ODP00011, among others listed above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Oil Drain Plug Gasket parts are listed for the 2014 Nissan NV2500, from DORMAN, AJUSA, APEX and 1 other brand. DORMAN 097134 carries the "Popular" badge. All of them fit every engine offered in the 2014 NV2500.

Listed part numbers: DORMAN 097134, AJUSA 01140600 and APEX ADP1904, plus the other parts above.

This table covers the caps on the oil filler neck. Read more

4 Oil Filler Cap parts for the 2014 Nissan NV2500 come from 4 brands — CALORSTAT, GATES, MOTORAD and 1 other brand. Every part fits both the 4.0L V6 and the 5.6L V8.

Part numbers include CALORSTAT OC2316, GATES 31115 and MOTORAD MO107, among others listed above.