2017 Nissan NV2500 Engine Parts

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

One part is listed for the 2017 Nissan NV2500 — SCHAEFFLER SS4961.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

9 Connecting Rod Bearing parts for the 2017 Nissan NV2500 come from 5 brands — KING ENGINE BEARINGS, TOPLINE, ENGINETECH and 2 other brands. The "Popular" part is ENGINETECH BB1219.

The High Performance section lists 2 options from KING ENGINE BEARINGS — engineered beyond original-equipment specification. KING ENGINE BEARINGS CR8051XP is listed in this group.

In the Standard Replacement grade, TOPLINE supplies 1 part: built to original-equipment specification. A representative part number is TOPLINE RBD46.

6 further parts sit outside the graded sections, with the same engine-level match.

Listed part numbers: ENGINETECH BB1219, KING ENGINE BEARINGS CR8051XP and KING ENGINE BEARINGS CR8051XPX, plus the other parts above.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

10 Conversion / Lower Gasket Set parts for the 2017 Nissan NV2500 come from 6 brands — FEL-PRO, AJUSA, APEX and 3 other brands. The "Popular" part is ENGINETECH NI40CSA.

This table covers the crankshafts that turn piston motion into rotation. Read more

This group shows a single part: ENGINETECH 838500.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

11 Crankshaft Main Bearing parts are listed for the 2017 Nissan NV2500, from KING ENGINE BEARINGS, TOPLINE, ENGINETECH and 2 other brands. TOPLINE TWD47 carries the "Popular" badge.

High Performance: 2 parts, from KING ENGINE BEARINGS. A representative part number is KING ENGINE BEARINGS MB5770XPX.

The Standard Replacement section: 2 options from TOPLINE. TOPLINE TWD47 is listed in this group.

7 ungrouped parts are not assigned to a grade, with the same engine-level match.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

5 Crankshaft Repair Sleeve parts are listed for the 2017 Nissan NV2500, from NATIONAL, WJB / INMOTION PARTS and BCA.

Listed part numbers: BCA NS99189, NATIONAL 99189 and NATIONAL 99181, plus the other parts above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

22 Crankshaft Seal parts are listed for the 2017 Nissan NV2500, from NATIONAL, WJB / INMOTION PARTS, AJUSA and 7 other brands. FEL-PRO BS40694 carries the "Popular" badge. 7 parts fit every engine; the other 15 are engine-specific.

This table covers the bolts that clamp the cylinder head to the block. Read more

12 Cylinder Head Bolt parts for the 2017 Nissan NV2500 come from 7 brands — AJUSA, APEX, BECK/ARNLEY and 4 other brands. The "Popular" part is AJUSA 81047800.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

21 Cylinder Head Gasket parts for the 2017 Nissan NV2500 come from 7 brands — APEX, FEL-PRO, MAHLE / CLEVITE and 4 other brands. The "Popular" part is APEX AHG555L.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

12 Cylinder Head Gasket Set parts for the 2017 Nissan NV2500 come from 6 brands — FEL-PRO, APEX, ENGINETECH and 3 other brands. The "Popular" part is APEX AHS5057.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

KAT'S HEATERS supplies both parts for the 2017 Nissan NV2500. All of them fit every engine offered in the 2017 NV2500.

Listed part numbers: KAT'S HEATERS 11412 and KAT'S HEATERS 28500.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

6 Engine Kit Gasket Set parts for the 2017 Nissan NV2500 come from 4 brands — AJUSA, TOPLINE, ELRING and 1 other brand.

Listed part numbers: AJUSA 50587300, AJUSA 50556800 and ELRING 939640, plus the other parts above.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

TOPLINE supplies both parts for the 2017 Nissan NV2500. 1 part fits every engine; the other 1 is engine-specific.

Listed part numbers: TOPLINE EVD41L and TOPLINE EVD41.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

4 Harmonic Balancer parts for the 2017 Nissan NV2500 come from 2 brands — ATP and DAYCO.

Listed part numbers: ATP 102414, ATP 102471 and DAYCO PB1664N, plus the other parts above.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

11 Intake Manifold Gasket parts for the 2017 Nissan NV2500 come from 7 brands — BECK/ARNLEY, FEL-PRO, APEX and 4 other brands. The "Popular" part is BECK/ARNLEY 0376171.

This table covers the Intake Manifold Runner Control Valve solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

2 Intake Manifold Runner Control Valve / Solenoid parts for the 2017 Nissan NV2500 come from 2 brands — DORMAN and STANDARD MOTOR PRODUCTS.

This group includes DORMAN 911506 and STANDARD MOTOR PRODUCTS RCS103.

This table covers the gaskets that seal the Intake Plenum. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Intake Plenum Gasket parts are listed for the 2017 Nissan NV2500, from AJUSA, APEX, DORMAN and 1 other brand.

Listed part numbers: AJUSA 01149900, APEX AMS5551 and DORMAN 953307, plus the other parts above.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

TOPLINE supplies both parts for the 2017 Nissan NV2500. 1 part fits every engine; the other 1 is engine-specific.

Part numbers include TOPLINE IVD41L and TOPLINE IVD41.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

9 Motor Mount parts are listed for the 2017 Nissan NV2500, from ANCHOR, DEA / MARMON RIDE CONTROL, WESTAR and 3 other brands. SKP SKM9506 carries the "Popular" badge.

In the Economy grade, SKP supplies 1 part: the catalog's value-priced group. A representative part number is SKP SKM9506.

The Standard Replacement section: 4 options from ANCHOR, BECK/ARNLEY, DEA / MARMON RIDE CONTROL and 1 other brand. ANCHOR 9506 is listed in this group.

4 ungrouped parts are not assigned to a grade, with the same engine-level match.

This group includes SKP SKM9506, ANCHOR 9506 and BECK/ARNLEY 1042177 and the remaining parts above.

This table covers the Motor Mount kits. Read more

ANCHOR supplies both parts for the 2017 Nissan NV2500.

This group includes ANCHOR 300143 and ANCHOR 300142.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

63 Oil parts are listed for the 2017 Nissan NV2500, from LIQUI MOLY, MOBIL, VALVOLINE and 4 other brands. LIQUI MOLY 20228 carries the "Popular" badge. Conventional, Full Synthetic, High Mileage (>75,000 Miles) and Synthetic Blend are all represented, and Full Synthetic alone accounts for 47 parts.

This table covers the heat exchangers that cool engine oil. Typical signs include oil at the cooler fittings, or coolant that looks like a milkshake. Pressure-test both circuits after a cooler swap — a leak here mixes oil and coolant. Read more

2 Oil Cooler parts are listed for the 2017 Nissan NV2500, from DORMAN and NISSENS. 1 part fits every engine; the other 1 is engine-specific.

Part numbers include DORMAN 918464 and NISSENS 91435.

This table covers the gaskets that seal the Oil Cooler. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: AJUSA 01517200.

This table covers the seals at the Oil Cooler. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Oil Cooler Seal parts for the 2017 Nissan NV2500 come from 2 brands — FEL-PRO and BECK/ARNLEY. Every part fits both the 4.0L V6 and the 5.6L V8.

Listed part numbers: BECK/ARNLEY 0396616, FEL-PRO 72493 and FEL-PRO 73233.

This table covers the drain plugs in the oil pan. Read more

7 Oil Drain Plug parts are listed for the 2017 Nissan NV2500, from DORMAN, AGS, BECK/ARNLEY and 3 other brands. DORMAN 090038 carries the "Popular" badge. 5 parts fit every engine; the other 2 are engine-specific.

Part numbers include DORMAN 090038, DORMAN 090049 and AGS ODP00011, among others listed above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

6 Oil Drain Plug Gasket parts for the 2017 Nissan NV2500 come from 5 brands — DORMAN, FEL-PRO, AJUSA and 2 other brands. The "Popular" part is DORMAN 097134. 5 parts fit every engine; the other 1 is engine-specific.

Part numbers include DORMAN 097134, FEL-PRO 73347 and AJUSA 01140600, among others listed above.

This table covers the caps on the oil filler neck. Read more

4 Oil Filler Cap parts are listed for the 2017 Nissan NV2500, from CALORSTAT, GATES, MOTORAD and 1 other brand. All of them fit every engine offered in the 2017 NV2500.

This group includes CALORSTAT OC2316, GATES 31115 and MOTORAD MO107 and the remaining parts above.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

21 Oil Filter parts are listed for the 2017 Nissan NV2500, from VARIOUS MFR, BOSCH, VAICO and 12 other brands. WIX 57356XP carries the "Popular" badge. 17 parts fit every engine; the other 4 are engine-specific.

Economy: 7 parts, from VAICO, VARIOUS MFR, BOSCH and 2 other brands. A representative part number is BOSCH 72226WS.

In the High Performance / Heavy Duty grade, WIX and MOBIL supply 2 parts: grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. A representative part number is WIX 57356XP.

The Standard Replacement section: 12 options from HENGST, BOSCH, DENSO and 8 other brands. BOSCH 3323 is listed in this group.

This table covers the oil pans that hold the engine's oil sump. Read more

6 Oil Pan parts for the 2017 Nissan NV2500 come from 5 brands — SPECTRA PREMIUM, SKP, AUTOTECNICA and 2 other brands. The "Popular" part is SKP SK264529.

Listed part numbers: SKP SK264529, AUTOTECNICA NI1415223 and DORMAN 264529, plus the other parts above.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

7 Oil Pan Gasket parts are listed for the 2017 Nissan NV2500, from VICTOR REINZ, APEX and FEL-PRO. 1 part fits every engine; the other 6 are engine-specific.

Listed part numbers: APEX AOP555, APEX AOP557 and FEL-PRO OS30787, plus the other parts above.