2016 Nissan Tiida Cooling System Parts

This table covers the engine coolants and antifreeze formulations specified for this cooling system. Typical signs include a rising temperature gauge, rusty or sludged coolant, or a heater that blows cold. Use the chemistry named in the notes. Mixing silicate, OAT and HOAT formulas can gel in the radiator. Read more

14 Coolant / Antifreeze parts for the 2016 Nissan Tiida come from 5 brands — PRESTONE, PEAK, VALVOLINE and 2 other brands. The "Popular" part is FVP MV5050GAL. Every part fits both the 1.6L L4 and the 1.8L L4.

In the Compatible With All Colors grade, PRESTONE supplies 1 part: grouped under the catalog's "Compatible With All Colors" designation — the notes column spells out what sets them apart. A representative part number is PRESTONE AF3055.

The Economy section lists 4 options from FVP, PEAK, PRESTONE and 1 other brand — the catalog's value-priced group. FVP MV5050GAL is listed in this group.

In the Heavy Duty grade, VALVOLINE supplies 1 part: rated for severe service. A representative part number is VALVOLINE 846439.

In the Premium grade, PRESTONE and PEAK supply 5 parts: a step above OE specification in materials, tolerances or warranty terms. A representative part number is PRESTONE AF2100.

In the Standard Replacement grade, VALVOLINE, AISIN and PEAK supply 3 parts: built to original-equipment specification. A representative part number is VALVOLINE 861398.

This table covers the overflow / expansion tanks that hold extra coolant. Read more

3 Coolant Reservoir parts are listed for the 2016 Nissan Tiida, from DORMAN, GPD and SKP. All of them fit every engine offered in the 2016 Tiida.

This group includes DORMAN 603618, GPD 2411243 and SKP SK603618.

This table covers the caps on the overflow / expansion tank. Typical signs include a leak at the neck, a cap that will not hold pressure, or a missing tether. Match the pressure rating or thread in the notes — radiator, reservoir and fuel caps are not interchangeable. Read more

2 Coolant Reservoir Cap parts are listed for the 2016 Nissan Tiida, from DORMAN and MOTORAD. All of them fit every engine offered in the 2016 Tiida.

Part numbers include DORMAN 54245 and MOTORAD T152.

This table covers the adapters used to pressure-test this cooling system. Read more

3 Cooling System Tester Adapter parts for the 2016 Nissan Tiida come from 2 brands — MOTORAD and GATES. 2 parts fit every engine; the other 1 is engine-specific.

This group includes GATES 31428, MOTORAD 3121 and MOTORAD 3122.

This table covers the radiators that dump engine heat to airflow through the core. Typical signs include overheating in traffic, a wet core, or coolant that disappears with no puddle. Replace the cap if it cannot hold the rated pressure, and bleed the system after the swap. Read more

3 Radiator parts for the 2016 Nissan Tiida come from 3 brands — AGILITY, SPECTRA PREMIUM and UAC. Every part fits both the 1.6L L4 and the 1.8L L4.

This group includes AGILITY 8012981, SPECTRA PREMIUM CU2981 and UAC RA2981C.

This table covers the caps that hold system pressure at the radiator or reservoir neck. Typical signs include a leak at the neck, a cap that will not hold pressure, or a missing tether. Match the pressure rating or thread in the notes — radiator, reservoir and fuel caps are not interchangeable. Read more

5 Radiator Cap parts for the 2016 Nissan Tiida come from 3 brands — GATES, MOTORAD and CALORSTAT. The "Popular" part is MOTORAD T13R. 3 parts fit every engine; the other 2 are engine-specific.

In the Locking Replacement grade, CALORSTAT, GATES and MOTORAD supply 3 parts: grouped under the catalog's "Locking Replacement" designation — the notes column spells out what sets them apart. A representative part number is CALORSTAT RC0213.

Standard Replacement: 2 parts, from MOTORAD and GATES. A representative part number is MOTORAD T13R.

This group includes MOTORAD T13R, CALORSTAT RC0213 and GATES 31533 and the remaining parts above.

This table covers the fan assemblies (and clutches, where listed) that pull air through the radiator. Read more

One part is listed for the 2016 Nissan Tiida — UAC FA50240C.

This table covers the upper, lower and connecting hoses between radiator, engine and reservoir. Typical signs include swelling, cracks, a soft spot, or a leak at a clamp. Replace adjacent aged hoses while the system is drained — they share the same heat cycle. Read more

7 Radiator Hose parts are listed for the 2016 Nissan Tiida, from GATES and ACDELCO. GATES 22519 carries the "Popular" badge.

Listed part numbers: GATES 22519, ACDELCO 20158S and GATES 21411, plus the other parts above.

This table covers the Radiator Upper Air Baffle retainers and clips. Read more

One part is listed for the 2016 Nissan Tiida — DORMAN 963545.

This table covers the senders that report coolant temperature to the gauge or ECU. Typical signs include a gauge that sits on empty or overheat, or a lamp that does not match what the engine is doing. Rule out the cluster and the wiring before replacing the sender. Read more

7 Temperature Sender / Sensor parts for the 2016 Nissan Tiida come from 4 brands — STANDARD MOTOR PRODUCTS, FOUR SEASONS, HOLSTEIN and 1 other brand. 1 part fits every engine; the other 6 are engine-specific.

The Economy section: 3 options from HOLSTEIN, STANDARD MOTOR PRODUCTS and UNITED MOTOR PRODUCTS. HOLSTEIN 2CTS0057 is listed in this group.

Standard Replacement: 4 parts, from FOUR SEASONS and STANDARD MOTOR PRODUCTS. A representative part number is FOUR SEASONS 37882.

This group includes HOLSTEIN 2CTS0057, STANDARD MOTOR PRODUCTS TX78T and UNITED MOTOR PRODUCTS CTS55 and the remaining parts above.

This table covers the thermostats that open the coolant circuit at the specified temperature. Typical signs include slow warm-up, a gauge that climbs in traffic, or heat that never quite arrives. Replace the housing gasket with the thermostat and bleed the system so a trapped air pocket does not cook the new part. Read more

4 Thermostat parts are listed for the 2016 Nissan Tiida, from MOTORAD and GATES. 2 parts fit every engine; the other 2 are engine-specific.

The Premium section: 1 option from MOTORAD. MOTORAD 7457205 is listed in this group.

The Standard Replacement section: 3 options from MOTORAD and GATES. GATES 34162 is listed in this group.

Listed part numbers: MOTORAD 7457205, GATES 34162 and MOTORAD 647180, plus the other parts above.

This table covers the seals at the thermostat housing and water outlet. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Thermostat / Thermostat Housing / Water Outlet Seal parts for the 2016 Nissan Tiida come from 3 brands — AJUSA, ELRING and VICTOR REINZ.

Listed part numbers: AJUSA 01177200, ELRING 310490 and VICTOR REINZ 714088200.

This table covers the housings and outlets the thermostat sits in. Read more

5 Thermostat Housing / Water Outlet parts are listed for the 2016 Nissan Tiida, from DORMAN, MOTORAD and SKP. 1 part fits every engine; the other 4 are engine-specific.

Economy: 3 parts, from DORMAN and SKP. A representative part number is DORMAN 9025853.

The Standard Replacement section: 2 options from MOTORAD. MOTORAD CH8751 is listed in this group.

Part numbers include DORMAN 9025853, DORMAN 902751 and SKP SK9025853, among others listed above.

This table covers the pumps that circulate coolant through the block and radiator. Typical signs include coolant at the weep hole, pulley play, or a growl from the front of the engine. Replace the thermostat and refill with the specified coolant whenever the pump comes off. Read more

7 Water Pump parts are listed for the 2016 Nissan Tiida, from GATES, US MOTOR WORKS, FVP and 3 other brands. US MOTOR WORKS US6218 carries the "Popular" badge. 4 parts fit every engine; the other 3 are engine-specific.

Economy: 3 parts, from US MOTOR WORKS, FVP and WJB / INMOTION PARTS. A representative part number is US MOTOR WORKS US6218.

The Standard Replacement section: 4 options from GATES, GMB and GRAF. GATES 41195 is listed in this group.

This group includes US MOTOR WORKS US6218 and WJB / INMOTION PARTS WU6218 and the remaining parts above.

This table covers the gaskets between the water pump and the block or housing. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: ELRING 449440.