2018 Nissan Tiida Cooling System Parts

This table covers the engine coolants and antifreeze formulations specified for this cooling system. Typical signs include a rising temperature gauge, rusty or sludged coolant, or a heater that blows cold. Use the chemistry named in the notes. Mixing silicate, OAT and HOAT formulas can gel in the radiator. Read more

12 Coolant / Antifreeze parts for the 2018 Nissan Tiida come from 5 brands — PRESTONE, PEAK, FVP and 2 other brands. The "Popular" part is FVP MV5050GAL. Every part fits both the 1.6L L4 and the 1.8L L4.

In the Compatible With All Colors grade, PRESTONE supplies 1 part: grouped under the catalog's "Compatible With All Colors" designation — the notes column spells out what sets them apart. A representative part number is PRESTONE AF3055.

The Economy section lists 3 options from FVP, PEAK and PRESTONE — the catalog's value-priced group. FVP MV5050GAL is listed in this group.

In the Premium grade, PRESTONE and PEAK supply 5 parts: a step above OE specification in materials, tolerances or warranty terms. A representative part number is PRESTONE AF2100.

In the Standard Replacement grade, VALVOLINE, AISIN and PEAK supply 3 parts: built to original-equipment specification. A representative part number is VALVOLINE 861398.

This table covers the overflow / expansion tanks that hold extra coolant. Read more

3 Coolant Reservoir parts are listed for the 2018 Nissan Tiida, from DORMAN, GPD and SKP. All of them fit every engine offered in the 2018 Tiida.

Part numbers include DORMAN 603618, GPD 2411243 and SKP SK603618.

This table covers the caps on the overflow / expansion tank. Typical signs include a leak at the neck, a cap that will not hold pressure, or a missing tether. Match the pressure rating or thread in the notes — radiator, reservoir and fuel caps are not interchangeable. Read more

One part is listed for the 2018 Nissan Tiida — MOTORAD T152.

This table covers the adapters used to pressure-test this cooling system. Read more

2 Cooling System Tester Adapter parts for the 2018 Nissan Tiida come from MOTORAD. Every part fits both the 1.6L L4 and the 1.8L L4.

Part numbers include MOTORAD 3121 and MOTORAD 3122.

This table covers the radiators that dump engine heat to airflow through the core. Typical signs include overheating in traffic, a wet core, or coolant that disappears with no puddle. Replace the cap if it cannot hold the rated pressure, and bleed the system after the swap. Read more

2 Radiator parts for the 2018 Nissan Tiida come from 2 brands — AGILITY and UAC. Every part fits both the 1.6L L4 and the 1.8L L4.

Part numbers include AGILITY 8012981 and UAC RA2981C.

This table covers the caps that hold system pressure at the radiator or reservoir neck. Typical signs include a leak at the neck, a cap that will not hold pressure, or a missing tether. Match the pressure rating or thread in the notes — radiator, reservoir and fuel caps are not interchangeable. Read more

3 Radiator Cap parts for the 2018 Nissan Tiida come from 2 brands — MOTORAD and CALORSTAT. Every part fits both the 1.6L L4 and the 1.8L L4.

In the Locking Replacement grade, CALORSTAT and MOTORAD supply 2 parts: grouped under the catalog's "Locking Replacement" designation — the notes column spells out what sets them apart. A representative part number is CALORSTAT RC0213.

Standard Replacement: 1 part, from MOTORAD. A representative part number is MOTORAD T13R.

Part numbers include CALORSTAT RC0213, MOTORAD ST13R and MOTORAD T13R.

This table covers the fan assemblies (and clutches, where listed) that pull air through the radiator. Read more

One part is listed for the 2018 Nissan Tiida — UAC FA50240C.

This table covers the Radiator Upper Air Baffle retainers and clips. Read more

One part is listed for the 2018 Nissan Tiida — DORMAN 963545.

This table covers the senders that report coolant temperature to the gauge or ECU. Typical signs include a gauge that sits on empty or overheat, or a lamp that does not match what the engine is doing. Rule out the cluster and the wiring before replacing the sender. Read more

6 Temperature Sender / Sensor parts for the 2018 Nissan Tiida come from 4 brands — STANDARD MOTOR PRODUCTS, HOLSTEIN, UNITED MOTOR PRODUCTS and 1 other brand. 2 parts fit every engine; the other 4 are engine-specific.

The Economy section: 3 options from HOLSTEIN, STANDARD MOTOR PRODUCTS and UNITED MOTOR PRODUCTS. HOLSTEIN 2CTS0057 is listed in this group.

Standard Replacement: 3 parts, from STANDARD MOTOR PRODUCTS and FOUR SEASONS. A representative part number is FOUR SEASONS 36448.

This group includes HOLSTEIN 2CTS0057, STANDARD MOTOR PRODUCTS TX78T and UNITED MOTOR PRODUCTS CTS55 and the remaining parts above.

This table covers the thermostats that open the coolant circuit at the specified temperature. Typical signs include slow warm-up, a gauge that climbs in traffic, or heat that never quite arrives. Replace the housing gasket with the thermostat and bleed the system so a trapped air pocket does not cook the new part. Read more

One part is listed for the 2018 Nissan Tiida — MOTORAD 647180.

This table covers the seals at the thermostat housing and water outlet. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Thermostat / Thermostat Housing / Water Outlet Seal parts for the 2018 Nissan Tiida come from 2 brands — AJUSA and VICTOR REINZ.

Part numbers include AJUSA 01177200 and VICTOR REINZ 714088200.

This table covers the housings and outlets the thermostat sits in. Read more

5 Thermostat Housing / Water Outlet parts are listed for the 2018 Nissan Tiida, from DORMAN, MOTORAD and SKP. 1 part fits every engine; the other 4 are engine-specific.

Economy: 3 parts, from DORMAN and SKP. A representative part number is DORMAN 9025853.

The Standard Replacement section: 2 options from MOTORAD. MOTORAD CH8751 is listed in this group.

Part numbers include DORMAN 9025853, DORMAN 902751 and SKP SK9025853, among others listed above.

This table covers the pumps that circulate coolant through the block and radiator. Typical signs include coolant at the weep hole, pulley play, or a growl from the front of the engine. Replace the thermostat and refill with the specified coolant whenever the pump comes off. Read more

5 Water Pump parts are listed for the 2018 Nissan Tiida, from FVP, US MOTOR WORKS, WJB / INMOTION PARTS and 1 other brand. US MOTOR WORKS US8104 carries the "Popular" badge. All of them fit every engine offered in the 2018 Tiida.

Economy: 3 parts, from US MOTOR WORKS, FVP and WJB / INMOTION PARTS. A representative part number is US MOTOR WORKS US8104.

The Standard Replacement section: 2 options from FVP and GMB. FVP 1502010 is listed in this group.

Listed part numbers: US MOTOR WORKS US8104 and WJB / INMOTION PARTS WU6218, plus the other parts above.