2017 Nissan Juke Electrical Switch & Relay Parts

This table covers the pressure switches on the A/C circuit. Typical signs include a function that works intermittently, or a click without the accessory coming on. Inspect the connector behind the switch; heat-damaged terminals will kill the new part too. Read more

5 A/C Refrigerant Pressure Switch parts are listed for the 2017 Nissan Juke, from WELLS, UAC, FOUR SEASONS and 1 other brand. UAC SW10087C carries the "Popular" badge.

This group includes UAC SW10087C, FOUR SEASONS 20994 and GPD 1711553 and the remaining parts above.

This table covers the relays that control the A/C System circuit. Typical signs include a click with no action, or a circuit that works only when you swap in a known-good relay. Swap with an identical relay in the fuse box before buying — it is the fastest test there is. Read more

UAC supplies both parts for the 2017 Nissan Juke.

Part numbers include UAC RE8417 and UAC RE8417C.

This table covers the relays that control the Accessory Power circuit. Typical signs include a click with no action, or a circuit that works only when you swap in a known-good relay. Swap with an identical relay in the fuse box before buying — it is the fastest test there is. Read more

This group shows a single part: WELLS 1R1921.

This table covers the Back Up / Reverse Lamp switches. Typical signs include a function that works intermittently, or a click without the accessory coming on. Inspect the connector behind the switch; heat-damaged terminals will kill the new part too. Read more

VEMO supplies the 3 Back Up / Reverse Lamp Switch parts for the 2017 Nissan Juke.

In the Economy grade, VEMO supplies 2 parts: the catalog's value-priced group. A representative part number is VEMO V38730011.

The Standard Replacement section lists 1 option from VEMO — built to original-equipment specification. VEMO V46730008 is listed in this group.

This group includes VEMO V38730011, VEMO V38730008 and VEMO V46730008.

This table covers the relays that control the Blower Motor circuit. Typical signs include a click with no action, or a circuit that works only when you swap in a known-good relay. Swap with an identical relay in the fuse box before buying — it is the fastest test there is. Read more

5 Blower Motor Relay parts are listed for the 2017 Nissan Juke, from STANDARD MOTOR PRODUCTS, BOSCH, HOLSTEIN and 1 other brand. BOSCH 0332011007 carries the "Popular" badge.

Listed part numbers: BOSCH 0332011007, HOLSTEIN 2RSW0014 and STANDARD MOTOR PRODUCTS RY640T, plus the other parts above.

This table covers the pedal-mounted switch that turns on the brake lamps. Typical signs include a function that works intermittently, or a click without the accessory coming on. Inspect the connector behind the switch; heat-damaged terminals will kill the new part too. Read more

16 Brake Light Switch parts are listed for the 2017 Nissan Juke, from STANDARD MOTOR PRODUCTS, VEMO, BWD/NIEHOFF and 7 other brands. STANDARD MOTOR PRODUCTS SLS370T carries the "Popular" badge.

Economy: 7 parts, from BWD/NIEHOFF, STANDARD MOTOR PRODUCTS, VEMO and 3 other brands. A representative part number is STANDARD MOTOR PRODUCTS SLS370T.

The Standard Replacement section: 9 options from STANDARD MOTOR PRODUCTS, BECK/ARNLEY, WELLS and 3 other brands. STANDARD MOTOR PRODUCTS SLS244 is listed in this group.

This table covers the Clutch Pedal Position / Starter Safety switches. Typical signs include a function that works intermittently, or a click without the accessory coming on. Inspect the connector behind the switch; heat-damaged terminals will kill the new part too. Read more

3 Clutch Pedal Position / Starter Safety Switch parts for the 2017 Nissan Juke come from 3 brands — HELLA, STANDARD MOTOR PRODUCTS and WELLS.

This group includes HELLA 010966571, STANDARD MOTOR PRODUCTS NS730 and WELLS 1S16266.

This table covers the dimmer switches that select headlamp high and low beam. Typical signs include a function that works intermittently, or a click without the accessory coming on. Inspect the connector behind the switch; heat-damaged terminals will kill the new part too. Read more

This group shows a single part: WELLS 1S17986.

This table covers the Door Jamb switches. Typical signs include a function that works intermittently, or a click without the accessory coming on. Inspect the connector behind the switch; heat-damaged terminals will kill the new part too. Read more

This group shows a single part: WELLS 1S4082.

This table covers the Fog / Driving Lamp switches. Typical signs include a function that works intermittently, or a click without the accessory coming on. Inspect the connector behind the switch; heat-damaged terminals will kill the new part too. Read more

This group shows a single part: WELLS 1S17986.

This table covers the relays that control the Horn circuit. Typical signs include a click with no action, or a circuit that works only when you swap in a known-good relay. Swap with an identical relay in the fuse box before buying — it is the fastest test there is. Read more

4 Horn Relay parts for the 2017 Nissan Juke come from 3 brands — STANDARD MOTOR PRODUCTS, ROSTRA and WELLS.

This group includes ROSTRA 600020, STANDARD MOTOR PRODUCTS HR159T and STANDARD MOTOR PRODUCTS HR159 and the remaining parts above.

This table covers the relays that control the Ignition circuit. Typical signs include a click with no action, or a circuit that works only when you swap in a known-good relay. Swap with an identical relay in the fuse box before buying — it is the fastest test there is. Read more

This group shows a single part: WELLS 1R1921.

This table covers the ignition switches that feed the starter circuit. Typical signs include a function that works intermittently, or a click without the accessory coming on. Inspect the connector behind the switch; heat-damaged terminals will kill the new part too. Read more

3 Ignition Starter Switch parts for the 2017 Nissan Juke come from 3 brands — DORMAN, STANDARD MOTOR PRODUCTS and WELLS.

This group includes DORMAN 989102, STANDARD MOTOR PRODUCTS US1111 and WELLS 1S15436.

This table covers the Neutral Safety Switch / Range sensors. Typical signs include a warning lamp, a stored code, or a reading that drops out when the harness is wiggled. Inspect the connector and ground before replacing the sensor — wiring faults are often condemned as bad sensors. Read more

8 Neutral Safety Switch / Range Sensor parts are listed for the 2017 Nissan Juke, from ROSTRA, WELLS, VEMO and 3 other brands. ROSTRA 670068 carries the "Popular" badge.

Economy: 1 part, from VEMO. A representative part number is VEMO V38730048.

The Standard Replacement section: 7 options from ROSTRA, WELLS, BECK/ARNLEY and 2 other brands. ROSTRA 670068 is listed in this group.

This group includes ROSTRA 670068, VEMO V38730048 and ROSTRA 670596 and the remaining parts above.

This table covers the senders and switches that report oil pressure to the gauge or lamp. Typical signs include a lamp that stays on, or a gauge that never moves. Confirm power and ground at the connector before replacing the sender or switch. Read more

7 Oil Pressure Sender / Switch parts are listed for the 2017 Nissan Juke, from VEMO, HOLSTEIN, STANDARD MOTOR PRODUCTS and 1 other brand. STANDARD MOTOR PRODUCTS PS650 carries the "Popular" badge.

Economy: 3 parts, from VEMO. A representative part number is VEMO V38730030.

The Standard Replacement section: 2 options from STANDARD MOTOR PRODUCTS and WELLS. STANDARD MOTOR PRODUCTS PS650 is listed in this group.

2 ungrouped parts are not assigned to a grade, with the same engine-level match.

Part numbers include STANDARD MOTOR PRODUCTS PS650, VEMO V38730030 and VEMO V38730031, among others listed above.

This table covers the Parking Brake switches. Typical signs include a function that works intermittently, or a click without the accessory coming on. Inspect the connector behind the switch; heat-damaged terminals will kill the new part too. Read more

2 Parking Brake Switch parts are listed for the 2017 Nissan Juke, from STANDARD MOTOR PRODUCTS and WELLS.

Listed part numbers: STANDARD MOTOR PRODUCTS PBS116 and WELLS 1S14184.

This table covers the switches that command each window motor. Typical signs include a function that works intermittently, or a click without the accessory coming on. Inspect the connector behind the switch; heat-damaged terminals will kill the new part too. Read more

5 Power Window Switch parts are listed for the 2017 Nissan Juke, from VEMO, ROSTRA, STANDARD MOTOR PRODUCTS and 1 other brand. VEMO V38730069 carries the "Popular" badge.

This group includes VEMO V38730069, ROSTRA 660703 and STANDARD MOTOR PRODUCTS DWS2307 and the remaining parts above.

This table covers the relays that control the Radiator Fan circuit. Typical signs include a click with no action, or a circuit that works only when you swap in a known-good relay. Swap with an identical relay in the fuse box before buying — it is the fastest test there is. Read more

This group shows a single part: WELLS 1R3519.

This table covers the relays that control the Seat Heater circuit. Typical signs include a click with no action, or a circuit that works only when you swap in a known-good relay. Swap with an identical relay in the fuse box before buying — it is the fastest test there is. Read more

One part is listed for the 2017 Nissan Juke — WELLS 1R1596.

This table covers the Transmission-Automatic Fluid Pressure switches. Typical signs include a function that works intermittently, or a click without the accessory coming on. Inspect the connector behind the switch; heat-damaged terminals will kill the new part too. Read more

ROSTRA supplies both parts for the 2017 Nissan Juke.

This group includes ROSTRA 501190 and ROSTRA 501589.

This table covers the combination / turn-signal switches. Typical signs include a function that works intermittently, or a click without the accessory coming on. Inspect the connector behind the switch; heat-damaged terminals will kill the new part too. Read more

One part is listed for the 2017 Nissan Juke — WELLS 1S17986.

This table covers the Wiper / Washer switches. Typical signs include a function that works intermittently, or a click without the accessory coming on. Inspect the connector behind the switch; heat-damaged terminals will kill the new part too. Read more

This group shows a single part: WELLS 1S17986.