2017 Nissan Juke Engine Parts

This table covers the chains that drive the balance shafts. Read more

3 Balance Shaft Chain parts for the 2017 Nissan Juke come from 3 brands — CLOYES, FVP and PREFERRED COMPONENTS INC.

Part numbers include CLOYES C756 and PREFERRED COMPONENTS INC C766B, among others listed above.

This table covers the Balance Shaft Chain tensioners. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

2 Balance Shaft Chain Tensioner parts are listed for the 2017 Nissan Juke, from CLOYES and FVP.

Part numbers include CLOYES 95762, among others listed above.

This table covers the Balance Shaft sprockets. Read more

2 Balance Shaft Sprocket parts for the 2017 Nissan Juke come from 2 brands — MELLING and PREFERRED COMPONENTS INC.

Listed part numbers: MELLING S945 and PREFERRED COMPONENTS INC G56320C.

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

ELRING supplies both parts for the 2017 Nissan Juke.

This group includes ELRING 073890 and ELRING 584880.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

4 Conversion / Lower Gasket Set parts for the 2017 Nissan Juke come from 2 brands — ELRING and AJUSA.

Listed part numbers: AJUSA 54237900, ELRING 779240 and ELRING 872240, plus the other parts above.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

One part is listed for the 2017 Nissan Juke — TOPLINE TWD43.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

2 Crankshaft Repair Sleeve parts are listed for the 2017 Nissan Juke, from NATIONAL and WJB / INMOTION PARTS.

Part numbers include NATIONAL 99181 and WJB / INMOTION PARTS WS99181.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

22 Crankshaft Seal parts are listed for the 2017 Nissan Juke, from ELRING, AJUSA, FEL-PRO and 9 other brands. AJUSA 15045100 carries the "Popular" badge.

This table covers the gaskets that seal the Crankshaft Seal. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: ELRING 504670.

This table covers the bolts that clamp the cylinder head to the block. Read more

6 Cylinder Head Bolt parts for the 2017 Nissan Juke come from 4 brands — ELRING, FEL-PRO, MAHLE / CLEVITE and 1 other brand. The "Popular" part is FEL-PRO ES73078.

Listed part numbers: FEL-PRO ES73078, MAHLE / CLEVITE GS34056 and AJUSA 81067100, plus the other parts above.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

7 Cylinder Head Gasket parts for the 2017 Nissan Juke come from 4 brands — ELRING, FEL-PRO, APEX and 1 other brand. The "Popular" part is APEX AHG578.

Listed part numbers: APEX AHG578, ELRING 774940 and AJUSA 10208100, plus the other parts above.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

5 Cylinder Head Gasket Set parts for the 2017 Nissan Juke come from 3 brands — ELRING, APEX and AJUSA. The "Popular" part is APEX AHS5078.

Part numbers include APEX AHS5078, AJUSA 52480400 and ELRING 476380, among others listed above.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

4 Engine Kit Gasket Set parts for the 2017 Nissan Juke come from 3 brands — ELRING, AJUSA and TOPLINE.

Listed part numbers: AJUSA 50433800, ELRING 794500 and ELRING 794510, plus the other parts above.

This table covers the followers that drive a mechanical fuel pump off the camshaft. Read more

2 Fuel Pump Camshaft Follower parts for the 2017 Nissan Juke come from 2 brands — STANDARD MOTOR PRODUCTS and WELLS.

Part numbers include STANDARD MOTOR PRODUCTS GDF603 and WELLS 5T5018.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

5 Harmonic Balancer parts for the 2017 Nissan Juke come from 5 brands — SKP, ULTRA-POWER, ATP and 2 other brands. The "Popular" part is ULTRA-POWER 594374.

The Economy section lists 1 option from SKP — the catalog's value-priced group. SKP SK594374 is listed in this group.

In the Standard Replacement grade, ULTRA-POWER, ATP, DAYCO and 1 other brand supply 4 parts: built to original-equipment specification. A representative part number is ULTRA-POWER 594374.

Listed part numbers: ULTRA-POWER 594374, SKP SK594374 and ATP 102405, plus the other parts above.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Intake Manifold Gasket parts for the 2017 Nissan Juke come from 3 brands — ELRING, AJUSA and APEX. The "Popular" part is ELRING 478420.

This group includes ELRING 478420, AJUSA 13251300 and APEX AMS5780 and the remaining parts above.

This table covers the gaskets that seal the Intake to Exhaust. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 2017 Nissan Juke — ELRING 693910.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

5 Motor Mount parts are listed for the 2017 Nissan Juke, from DEA / MARMON RIDE CONTROL, SUSPENSIA, PIONEER and 1 other brand. PIONEER 619818 carries the "Popular" badge.

Economy: 1 part, from SUSPENSIA. A representative part number is SUSPENSIA X36EM0011.

The Standard Replacement section: 4 options from DEA / MARMON RIDE CONTROL, PIONEER and ANCHOR. PIONEER 619818 is listed in this group.

Listed part numbers: PIONEER 619818, SUSPENSIA X36EM0011 and ANCHOR 9818, plus the other parts above.

This table covers the Motor Mount kits. Read more

ANCHOR supplies the 3 Motor Mount Kit parts for the 2017 Nissan Juke.

Part numbers include ANCHOR 300621, ANCHOR 300617 and ANCHOR 300618.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

88 Oil parts are listed for the 2017 Nissan Juke, from LIQUI MOLY, VALVOLINE, MOBIL and 4 other brands. MOBIL 125195 carries the "Popular" badge. Conventional, Full Synthetic, High Mileage (>75,000 Miles) and Synthetic Blend are all represented, and Full Synthetic alone accounts for 68 parts.

This table covers the heat exchangers that cool engine oil. Typical signs include oil at the cooler fittings, or coolant that looks like a milkshake. Pressure-test both circuits after a cooler swap — a leak here mixes oil and coolant. Read more

4 Oil Cooler parts are listed for the 2017 Nissan Juke, from DORMAN, NISSENS and STANDARD MOTOR PRODUCTS.

This group includes DORMAN 918936, DORMAN 918463 and NISSENS 91519 and the remaining parts above.

This table covers the gaskets that seal the Oil Cooler. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: ELRING 642490.

This table covers the drain plugs in the oil pan. Read more

8 Oil Drain Plug parts are listed for the 2017 Nissan Juke, from ELRING, DORMAN, AGS and 2 other brands. DORMAN 090038 carries the "Popular" badge.

This group includes DORMAN 090038, DORMAN 090049 and AGS ODP00011 and the remaining parts above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

8 Oil Drain Plug Gasket parts for the 2017 Nissan Juke come from 5 brands — ELRING, DORMAN, FEL-PRO and 2 other brands. The "Popular" part is DORMAN 097134.

Part numbers include DORMAN 097134, FEL-PRO 73347 and AJUSA 01140600, among others listed above.

This table covers the caps on the oil filler neck. Read more

5 Oil Filler Cap parts are listed for the 2017 Nissan Juke, from MOTORAD, CALORSTAT, DORMAN and 2 other brands. MOTORAD MO107 carries the "Popular" badge.

This group includes MOTORAD MO107, CALORSTAT OC2316 and DORMAN 90200 and the remaining parts above.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

18 Oil Filter parts are listed for the 2017 Nissan Juke, from VARIOUS MFR, BOSCH, WIX and 11 other brands. MOBIL M1108A carries the "Popular" badge.

Economy: 6 parts, from VARIOUS MFR, BOSCH, FRAM and 2 other brands. A representative part number is BOSCH 72230WS.

In the High Performance / Heavy Duty grade, MOBIL and WIX supply 2 parts: grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. A representative part number is MOBIL M1108A.

The Standard Replacement section: 10 options from BOSCH, MOTORCRAFT, WIX and 7 other brands. BOSCH 3300 is listed in this group.

This table covers the seals at the Oil Filter Housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

One part is listed for the 2017 Nissan Juke — ELRING 365960.

This table covers the oil pans that hold the engine's oil sump. Read more

6 Oil Pan parts for the 2017 Nissan Juke come from 6 brands — SKP, SPECTRA PREMIUM, ACKOJA and 3 other brands. The "Popular" part is SKP SKNSP39A.

This group includes SKP SKNSP39A, SPECTRA PREMIUM NSP39A and ACKOJA A380289 and the remaining parts above.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Oil Pan Gasket parts are listed for the 2017 Nissan Juke, from VICTOR REINZ, APEX, ELRING and 2 other brands. VICTOR REINZ 703141410 carries the "Popular" badge.

Part numbers include VICTOR REINZ 703141410, APEX AOP574 and ELRING 380960, among others listed above.

This table covers the Oil pumps. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit. Read more

One part is listed for the 2017 Nissan Juke — TOPLINE OPD50.

This table covers the chains that drive the oil pump. Read more

4 Oil Pump Chain parts for the 2017 Nissan Juke come from 3 brands — S.A. GEAR, CLOYES and MELLING.

Part numbers include CLOYES C527, MELLING 756 and S.A. GEAR C1224, among others listed above.

This table covers the Oil Pump Chain tensioners. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

5 Oil Pump Chain Tensioner parts are listed for the 2017 Nissan Juke, from S.A. GEAR, CLOYES, MELLING and 1 other brand. S.A. GEAR 91268 carries the "Popular" badge.

This group includes S.A. GEAR 91268, CLOYES 96178 and MELLING BT5762 and the remaining parts above.

This table covers the gaskets that seal the Oil Pump. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: ELRING 774250.

This table covers the seals at the Oil Pump. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: ELRING 487830.

This table covers the Oil Pump sprockets. Read more

3 Oil Pump Sprocket parts for the 2017 Nissan Juke come from 3 brands — CLOYES, FVP and S.A. GEAR.

Listed part numbers: CLOYES S945 and S.A. GEAR S1304, plus the other parts above.

This table covers the rings that seal each piston to the cylinder wall. Read more

This group shows a single part: ITM ENGINE COMPONENTS 0219281.

This table covers the timing chains that keep the cams in time with the crank. Read more

3 Timing Chain parts for the 2017 Nissan Juke come from 3 brands — CLOYES, PREFERRED COMPONENTS INC and S.A. GEAR.

This group includes CLOYES C526, PREFERRED COMPONENTS INC C7162 and S.A. GEAR C1223.

This table covers kits that group a timing chain with the related tensioners and guides. Read more

9 Timing Chain & Component Kit parts are listed for the 2017 Nissan Juke, from S.A. GEAR, PREFERRED COMPONENTS INC, ENGINETECH and 1 other brand. S.A. GEAR 76451 carries the "Popular" badge.

Economy: 5 parts, from S.A. GEAR and PREFERRED COMPONENTS INC. A representative part number is S.A. GEAR 76451.

The Standard Replacement section: 4 options from ENGINETECH and CLOYES. ENGINETECH TS7230 is listed in this group.

Listed part numbers: S.A. GEAR 76451, PREFERRED COMPONENTS INC TS11163 and PREFERRED COMPONENTS INC TS21162, plus the other parts above.

This table covers the guides and dampers that keep the timing chain on its path. Read more

8 Timing Chain Guide / Damper parts for the 2017 Nissan Juke come from 4 brands — S.A. GEAR, CLOYES, MELLING and 1 other brand. The "Popular" part is S.A. GEAR 71074.

Part numbers include S.A. GEAR 71074, S.A. GEAR 91089 and CLOYES 95582, among others listed above.