2017 Nissan Quest Suspension Parts

This table covers the cam bolts and plates used to set camber at the knuckle. Typical signs include warpage, cracks, or a plate that no longer locates the assembly. Confirm which plate the notes describe — backing plates, clutch plates and strike plates are different parts. Read more

This group shows a single part: MEVOTECH MS60005.

This table covers the rubber and polyurethane isolators that seat coil springs. Typical signs include a squeak from the spring pocket, or a spring that has walked off its seat. Replace the isolator whenever the spring is out — a crushed seat will noise a brand-new spring. Read more

4 Coil Spring Seat / Insulator parts for the 2017 Nissan Quest come from 4 brands — DEA / MARMON RIDE CONTROL, KYB, MOOG and 1 other brand.

Part numbers include DEA / MARMON RIDE CONTROL 4714132, KYB SM5821 and MOOG K160449, among others listed above.

This table covers the control arms that locate each hub relative to the chassis. Typical signs include clunks over bumps, a wander on the highway, or inner-edge tire wear. Get an alignment after any control-arm work, and inspect the ball joint and bushings that came with the arm. Read more

20 Control Arm parts for the 2017 Nissan Quest come from 9 brands — MEVOTECH, SUSPENSIA, DELPHI and 6 other brands. The "Popular" part is DELPHI TC7422.

In the Daily Driver grade, MEVOTECH, SUSPENSIA, DELPHI and 3 other brands supply 12 parts: grouped for everyday commuting duty. A representative part number is DELPHI TC7422.

The Economy section lists 8 options from MEVOTECH, SKP, BECK/ARNLEY and 1 other brand — the catalog's value-priced group. SKP SCMS301201 is listed in this group.

This table covers the bushings pressed into each control arm. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

7 Control Arm Bushing parts for the 2017 Nissan Quest come from 3 brands — SUSPENSIA, DORMAN and MEVOTECH. The "Popular" part is DORMAN 540151.

Daily Driver: 5 parts, from SUSPENSIA and MEVOTECH. A representative part number is MEVOTECH MS304171.

The Economy section: 2 options from DORMAN. DORMAN 540151 is listed in this group.

Part numbers include DORMAN 540151, MEVOTECH MS304171 and SUSPENSIA X15BU1436, among others listed above.

This table covers the shocks and struts that damp wheel motion. Typical signs include a nose that keeps bouncing, cupped tires, or fluid weeping down the body. Replace shocks or struts in axle pairs and renew the mounts if they are torn or collapsed. Read more

12 Shock / Strut parts for the 2017 Nissan Quest come from 6 brands — FCS, MONROE, PRT and 3 other brands. The "Popular" part is FCS 346322.

The Economy section: 4 options from PRT, MONROE and SENSEN. MONROE 210331 is listed in this group.

The Original Ride Quality section lists 8 options from FCS, GABRIEL, KYB and 1 other brand — grouped under the catalog's "Original Ride Quality" designation — the notes column spells out what sets them apart. FCS 346322 is listed in this group.

This table covers complete strut assemblies with the spring already installed. Read more

6 Shock / Strut & Coil Spring Assembly parts for the 2017 Nissan Quest come from 3 brands — PRT, FCS and TOP NOTCH. The "Popular" part is PRT 920401.

The Economy section: 2 options from PRT. PRT 920401 is listed in this group.

The Original Ride Quality section: 4 options from FCS and TOP NOTCH. FCS 1333741R is listed in this group.

This group includes PRT 920401, PRT 920400 and FCS 1333741R and the remaining parts above.

This table covers the Shock / Strut bellows. Read more

4 Shock / Strut Bellow parts are listed for the 2017 Nissan Quest, from KYB, MONROE and SKP.

Listed part numbers: KYB SB102, KYB SB132 and MONROE 63631, plus the other parts above.

This table covers the upper mounts (and bearings) a strut bolts through at the tower. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

5 Shock / Strut Mount parts are listed for the 2017 Nissan Quest, from KYB, BECK/ARNLEY, MONROE and 1 other brand. DEA / MARMON RIDE CONTROL 4714084 carries the "Popular" badge.

The Daily Driver section: 4 options from KYB, BECK/ARNLEY and MONROE. BECK/ARNLEY 1018281 is listed in this group.

Economy: 1 part, from DEA / MARMON RIDE CONTROL. A representative part number is DEA / MARMON RIDE CONTROL 4714084.

This group includes DEA / MARMON RIDE CONTROL 4714084, BECK/ARNLEY 1018281 and KYB SM5735 and the remaining parts above.

This table covers the Subframe bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

2 Subframe Bushing parts for the 2017 Nissan Quest come from DORMAN.

This group includes DORMAN 523516 and DORMAN 523517.

This table covers the links that connect the anti-roll bar to each control arm or strut. Typical signs include a clunk on one wheel over a driveway, or a rattle that goes away when you lean on the bar. Replace links in pairs; a seized stud often takes the bushing with it. Read more

23 Sway Bar Link parts for the 2017 Nissan Quest come from 9 brands — MEVOTECH, QUICK STEER, DORMAN and 6 other brands. The "Popular" part is DORMAN 542415.

Daily Driver: 10 parts, from DORMAN, MOOG, MEVOTECH and 2 other brands. A representative part number is DORMAN 542415.

The Economy section: 11 options from QUICK STEER, SKP, BECK/ARNLEY and 2 other brands. SKP SK750267 is listed in this group.

In the Premium grade, MEVOTECH supplies 2 parts: a step above OE specification in materials, tolerances or warranty terms. A representative part number is MEVOTECH TXMS30852.