2018 Nissan Frontier Automatic Transmission Parts

This table covers the Bushing kits. Read more

DURA-BOND supplies the 3 Bushing Kit parts for the 2018 Nissan Frontier. All of them fit every engine offered in the 2018 Frontier.

This group includes DURA-BOND TK2, DURA-BOND TK29 and DURA-BOND TK36.

This table covers the clutch-plate packs inside the transmission or transfer case. Read more

RAYBESTOS POWERTRAIN supplies the 5 Clutch Plate Pack parts for the 2018 Nissan Frontier. 4 parts fit every engine; the other 1 is engine-specific.

The Friction Plate Pack section lists 3 options from RAYBESTOS POWERTRAIN — grouped under the catalog's "Friction Plate Pack" designation — the notes column spells out what sets them apart. RAYBESTOS POWERTRAIN RCP96188 is listed in this group.

In the Steel Plate Pack grade, RAYBESTOS POWERTRAIN supplies 1 part: grouped under the catalog's "Steel Plate Pack" designation — the notes column spells out what sets them apart. A representative part number is RAYBESTOS POWERTRAIN STMNISSN40.

1 ungrouped part is not assigned to a grade, with the same engine-level match.

Listed part numbers: RAYBESTOS POWERTRAIN RCP96188, RAYBESTOS POWERTRAIN RCPBP47 and RAYBESTOS POWERTRAIN RCPS52, plus the other parts above.

This table covers the Extension Housing bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

One part is listed for the 2018 Nissan Frontier — DURA-BOND JT17.

This table covers the seals at the Extension Housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

5 Extension Housing Seal parts for the 2018 Nissan Frontier come from 4 brands — NATIONAL, BCA, TIMKEN and 1 other brand. The "Popular" part is NATIONAL 224464. Every part fits both the 2.5L L4 and the 4.0L V6.

Part numbers include NATIONAL 224464, BCA NS1973 and NATIONAL 1973, among others listed above.

This table covers the replacement filters for this application — the table heading and notes say which circuit. Typical signs include restricted flow — long cranking, weak airflow, or dirty fluid after a short interval. Seat the new filter so it cannot bypass, and use the grade the notes call for. Read more

2 Filter parts are listed for the 2018 Nissan Frontier, from ATP and RAYBESTOS POWERTRAIN. 1 part fits every engine; the other 1 is engine-specific.

Part numbers include ATP B205 and RAYBESTOS POWERTRAIN 515934.

This table covers the heat exchangers that cool transmission fluid. Typical signs include fluid that overheats, a leak at the cooler fittings, or milky fluid that says coolant and ATF have mixed. Flush the lines when you replace a cooler. Cross-contamination is how a small leak becomes a transmission job. Read more

7 Fluid Cooler parts are listed for the 2018 Nissan Frontier, from SKP, TYC, GPD and 4 other brands. SKP SKTOC047 carries the "Popular" badge. 4 parts fit every engine; the other 3 are engine-specific.

Listed part numbers: SKP SKTOC047, TYC 19004 and GPD 2611314, plus the other parts above.

This table covers the Fluid Cooler Line hoses. Typical signs include swelling, cracks, a soft spot, or a leak at a clamp. Replace adjacent aged hoses while the system is drained — they share the same heat cycle. Read more

SUNSONG supplies the 3 Fluid Cooler Line / Hose parts for the 2018 Nissan Frontier. 1 part fits every engine; the other 2 are engine-specific.

This group includes SUNSONG 5801787, SUNSONG 5801790 and SUNSONG 5801799.

This table covers the gaskets that seal the Fluid Pan. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Fluid Pan Gasket parts are listed for the 2018 Nissan Frontier, from FEL-PRO and MAHLE / CLEVITE. All of them fit every engine offered in the 2018 Frontier.

Part numbers include FEL-PRO TOS18805 and MAHLE / CLEVITE W33435.

This table covers the Fluid Pump bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

DURA-BOND supplies both parts for the 2018 Nissan Frontier. All of them fit every engine offered in the 2018 Frontier.

This group includes DURA-BOND JT16 and DURA-BOND JT16TG.

This table covers the precision wear sleeves used to restore a transmission pump seal surface. Read more

2 Fluid Pump Repair Sleeve parts for the 2018 Nissan Frontier come from 2 brands — NATIONAL and WJB / INMOTION PARTS. Every part fits both the 2.5L L4 and the 4.0L V6.

This group includes NATIONAL 99181 and WJB / INMOTION PARTS WS99181.

This table covers the seals at the Fluid Pump. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Fluid Pump Seal parts for the 2018 Nissan Frontier come from 2 brands — NATIONAL and WJB / INMOTION PARTS. Every part fits both the 2.5L L4 and the 4.0L V6.

This group includes NATIONAL 224663 and WJB / INMOTION PARTS WS224663.

This table covers the seals at the Manual Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Manual Shaft Seal parts for the 2018 Nissan Frontier come from 3 brands — BCA, NATIONAL and WJB / INMOTION PARTS. Every part fits both the 2.5L L4 and the 4.0L V6.

This group includes BCA NS221207, NATIONAL 221207 and WJB / INMOTION PARTS WS221207.

This table covers the seals at the Output Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

One part is listed for the 2018 Nissan Frontier — TIMKEN 221207.

This table covers the Pressure Control (EPC) solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

ROSTRA supplies both parts for the 2018 Nissan Frontier. All of them fit every engine offered in the 2018 Frontier.

This group includes ROSTRA 520540 and ROSTRA 520539.

This table covers the rebuild kits for this assembly. Read more

This group shows a single part: TRANSTEC 80000826.

This table covers the Shift cables. Typical signs include a stretched or frayed cable, or a control that no longer reaches the end of its travel. Route the new cable through the same clips. A kinked cable binds and fails early. Read more

4 Shift Cable parts for the 2018 Nissan Frontier come from 3 brands — ATP, DORMAN and PIONEER. 2 parts fit every engine; the other 2 are engine-specific.

This group includes ATP Y1444, ATP Y1485 and DORMAN 905655 and the remaining parts above.

This table covers the Shift Linkage bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

This group shows a single part: DORMAN 14103.

This table covers the seals at the Shift Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: SCHAEFFLER SS2111.

This table covers the Shift solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

This group shows a single part: ROSTRA 520538.

This table covers the Sun Gear bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

4 Sun Gear Bushing parts for the 2018 Nissan Frontier come from DURA-BOND. Every part fits both the 2.5L L4 and the 4.0L V6.

This group includes DURA-BOND JT11, DURA-BOND JT111 and DURA-BOND JT12 and the remaining parts above.

This table covers the seals at the Torque Converter Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Torque Converter Shaft Seal parts for the 2018 Nissan Frontier come from 2 brands — SCHAEFFLER and TIMKEN. Every part fits both the 2.5L L4 and the 4.0L V6.

Part numbers include SCHAEFFLER SS2851 and TIMKEN 224663.

This table covers the automatic-transmission fluids specified for this gearbox. Typical signs include harsh or delayed shifts, fluid that smells burnt, or a shudder at light throttle. Use exactly the specification in the notes. Automatic transmissions are unforgiving of the wrong fluid. Read more

18 Transmission Fluid parts are listed for the 2018 Nissan Frontier, from VALVOLINE, LIQUI MOLY, PENTOSIN and 8 other brands. ACDELCO 109243 carries the "Popular" badge. 17 parts fit every engine; the other 1 is engine-specific.

The ATF 64 section lists 2 options from PENTOSIN — grouped under the catalog's "ATF 64" designation — the notes column spells out what sets them apart. PENTOSIN 1058113 is listed in this group.

In the Dexron grade, ACDELCO supplies 1 part: grouped under the catalog's "Dexron" designation — the notes column spells out what sets them apart. A representative part number is ACDELCO 109243.

The Matic S section lists 2 options from BECK/ARNLEY and IDEMITSU — grouped under the catalog's "Matic S" designation — the notes column spells out what sets them apart. BECK/ARNLEY 2522000 is listed in this group.

In the Mercon grade, AISIN supplies 1 part: grouped under the catalog's "Mercon" designation — the notes column spells out what sets them apart. A representative part number is AISIN ATFMSV.

In the Multi-Vehicle grade, VALVOLINE, LIQUI MOLY, LUCAS OIL and 2 other brands supply 10 parts: grouped under the catalog's "Multi-Vehicle" designation — the notes column spells out what sets them apart. A representative part number is MOBIL 126505.

In the ZF Fluid grade, ZF supplies 1 part: grouped under the catalog's "ZF Fluid" designation — the notes column spells out what sets them apart. A representative part number is ZF 5961308623.

1 ungrouped part is not assigned to a grade, with the same engine-level match.

This table covers the conditioners and additives used with this transmission fluid. Read more

LUBEGARD supplies the 7 Transmission Fluid Additive parts for the 2018 Nissan Frontier. LUBEGARD 19610 carries the "Popular" badge. All of them fit every engine offered in the 2018 Frontier.

Listed part numbers: LUBEGARD 19610, LUBEGARD 60902 and LUBEGARD 19689, plus the other parts above.

This table covers the mounts that hold the transmission to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

7 Transmission Mount parts for the 2018 Nissan Frontier come from 4 brands — ANCHOR, WESTAR, DEA / MARMON RIDE CONTROL and 1 other brand. The "Popular" part is ANCHOR 9520. 3 parts fit every engine; the other 4 are engine-specific.

Part numbers include ANCHOR 9520, WESTAR EM9482 and ANCHOR 9482, among others listed above.

This table covers the valve bodies that route hydraulic pressure inside the transmission. Read more

SONNAX supplies the 5 Valve Body parts for the 2018 Nissan Frontier. All of them fit every engine offered in the 2018 Frontier.

This group includes SONNAX NIS501, SONNAX NIS502 and SONNAX NIS504 and the remaining parts above.