2018 Nissan Frontier Drivetrain Parts

This table covers the Axle Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

3 Axle Shaft Bearing parts for the 2018 Nissan Frontier come from BECK/ARNLEY.

The Economy section lists 1 option from BECK/ARNLEY — the catalog's value-priced group. BECK/ARNLEY 0514270 is listed in this group.

In the Standard Replacement grade, BECK/ARNLEY supplies 1 part: built to original-equipment specification. A representative part number is BECK/ARNLEY 0514113.

1 further part sits outside the graded sections, with the same engine-level match.

This group includes BECK/ARNLEY 0514270 and BECK/ARNLEY 0514113 and the remaining parts above.

This table covers the seals where an axle shaft exits the housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

11 Axle Shaft Seal parts are listed for the 2018 Nissan Frontier, from TIMKEN, NATIONAL, BECK/ARNLEY and 2 other brands. DANA 52765 carries the "Popular" badge. 7 parts fit every engine; the other 4 are engine-specific.

This table covers the complete CV axle shafts from differential (or hub) to wheel. Typical signs include a click in tight turns, grease flung around the wheel well, or a vibration that builds with speed. A torn boot caught early is a boot kit; caught late it is the whole axle. Torque the axle nut to the method in the notes. Read more

4 CV Axle parts are listed for the 2018 Nissan Frontier, from TRAKMOTIVE, GSP and TOP NOTCH. 2 parts fit every engine; the other 2 are engine-specific.

The Specialty - For Lifted Vehicles section lists 1 option from TRAKMOTIVE — grouped under the catalog's "Specialty - For Lifted Vehicles" designation — the notes column spells out what sets them apart. TRAKMOTIVE NI8229XTT is listed in this group.

The Standard Replacement section: 3 options from GSP, TOP NOTCH and TRAKMOTIVE. GSP NCV53127 is listed in this group.

This group includes TRAKMOTIVE NI8229XTT, GSP NCV53127 and TOP NOTCH TN13138 and the remaining parts above.

This table covers the boots that keep grease in a CV joint. Typical signs include a split boot, grease flung around the joint, or a click once grit is inside. A boot caught early is a kit. Once the joint has clicked, the joint itself is usually worn. Read more

BECK/ARNLEY supplies both parts for the 2018 Nissan Frontier. All of them fit every engine offered in the 2018 Frontier.

Listed part numbers: BECK/ARNLEY 1032505 and BECK/ARNLEY 1032867.

This table covers the bearings and races that support the differential carrier. Read more

7 Differential Carrier Bearing / Race parts are listed for the 2018 Nissan Frontier, from WJB / INMOTION PARTS, BCA and ULTRA-POWER. WJB / INMOTION PARTS WT30208 carries the "Popular" badge. All of them fit every engine offered in the 2018 Frontier.

Economy: 4 parts, from WJB / INMOTION PARTS and ULTRA-POWER. A representative part number is WJB / INMOTION PARTS WT30208.

The Standard Replacement section: 3 options from BCA. BCA NBJLM704610 is listed in this group.

This group includes WJB / INMOTION PARTS WT30208 and WJB / INMOTION PARTS WTJLM704649 and the remaining parts above.

This table covers the slingers that keep gear oil off the pinion seal. Read more

One part is listed for the 2018 Nissan Frontier — DANA 2002305.

This table covers the bearings and races on the differential pinion. Read more

14 Differential Pinion Bearing / Race parts for the 2018 Nissan Frontier come from 6 brands — WJB / INMOTION PARTS, BCA, FAMOUS BRAND and 3 other brands. The "Popular" part is WJB / INMOTION PARTS WTM88048. Every part fits both the 2.5L L4 and the 4.0L V6.

The Economy section: 7 options from WJB / INMOTION PARTS, FAMOUS BRAND and ULTRA-POWER. WJB / INMOTION PARTS WTM88048 is listed in this group.

Standard Replacement: 7 parts, from BCA, NATIONAL and TIMKEN. A representative part number is BCA NBM88010.

This table covers the wear sleeves used to restore a grooved pinion seal surface. Read more

5 Differential Pinion Repair Sleeve parts are listed for the 2018 Nissan Frontier, from BCA, WJB / INMOTION PARTS and NATIONAL. NATIONAL 99157 carries the "Popular" badge. All of them fit every engine offered in the 2018 Frontier.

Part numbers include NATIONAL 99157, BCA NS99157 and BCA NS99189, among others listed above.

This table covers the seals at the differential pinion yoke. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

9 Differential Pinion Seal parts are listed for the 2018 Nissan Frontier, from NATIONAL, TIMKEN, WJB / INMOTION PARTS and 2 other brands. NATIONAL 711069 carries the "Popular" badge. All of them fit every engine offered in the 2018 Frontier.

This group includes NATIONAL 711069, TIMKEN 100712V and BCA NS710847 and the remaining parts above.

This table covers the driveshafts that carry torque from the transmission or transfer case. Read more

14 Drive Shaft parts for the 2018 Nissan Frontier come from 7 brands — CARDONE, DORMAN, SKP and 4 other brands. The "Popular" part is SKP SK938209. 5 parts fit every engine; the other 9 are engine-specific.

This table covers the Drive Shaft Center Support bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

7 Drive Shaft Center Support Bearing parts for the 2018 Nissan Frontier come from 7 brands — WJB / INMOTION PARTS, SKP, ANCHOR and 4 other brands. The "Popular" part is WJB / INMOTION PARTS WCHB108D. Every part fits both the 2.5L L4 and the 4.0L V6.

The Economy section: 2 options from WJB / INMOTION PARTS and SKP. WJB / INMOTION PARTS WCHB108D is listed in this group.

Standard Replacement: 5 parts, from ANCHOR, DANA, NATIONAL and 2 other brands. A representative part number is ANCHOR 6071.

Listed part numbers: WJB / INMOTION PARTS WCHB108D, SKP SKM6071 and ANCHOR 6071, plus the other parts above.

This table covers the gear oils specified for the axle or transfer case. Typical signs include a low-oil lamp, knocking, or oil that has gone thin before the next interval. Match the viscosity and spec in the notes, not just the weight on the bottle. Read more

29 Gear Oil parts are listed for the 2018 Nissan Frontier, from VALVOLINE, LUCAS OIL, MOBIL and 2 other brands. VALVOLINE VV982 carries the "Popular" badge. SAE 75W-140, SAE 75W-90 and SAE 80W-90 are all represented, and SAE 75W-90 alone accounts for 12 parts.

This table covers the Gear Oil additives. Read more

One part is listed for the 2018 Nissan Frontier — USA STANDARD GEAR USA15018.

This table covers the fluids specified for the transfer case. Typical signs include discolored fluid, a burnt smell, or a level that keeps dropping. Use only the specification in the notes — the tables group grades because they are not interchangeable. Read more

14 Transfer Case Fluid parts are listed for the 2018 Nissan Frontier, from VALVOLINE, PENTOSIN, LUCAS OIL and 2 other brands. ACDELCO 109243 carries the "Popular" badge.

In the ATF +4 grade, PENTOSIN supplies 2 parts: grouped under the catalog's "ATF +4" designation — the notes column spells out what sets them apart. A representative part number is PENTOSIN 1058112.

In the Dexron grade, VALVOLINE and ACDELCO supply 4 parts: grouped under the catalog's "Dexron" designation — the notes column spells out what sets them apart. A representative part number is ACDELCO 109243.

The Matic S section lists 1 option from IDEMITSU — grouped under the catalog's "Matic S" designation — the notes column spells out what sets them apart. IDEMITSU 30040101750 is listed in this group.

In the Mercon grade, VALVOLINE supplies 1 part: grouped under the catalog's "Mercon" designation — the notes column spells out what sets them apart. A representative part number is VALVOLINE 822345.

In the Multi-Vehicle grade, VALVOLINE and LUCAS OIL supply 6 parts: grouped under the catalog's "Multi-Vehicle" designation — the notes column spells out what sets them apart. A representative part number is VALVOLINE VV3246.

This table covers the Transfer Case Input Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

4 Transfer Case Input Shaft Bearing parts are listed for the 2018 Nissan Frontier, from BCA, NATIONAL, NSK and 1 other brand. 3 parts fit every engine; the other 1 is engine-specific.

This group includes BCA NB110CC, NATIONAL 110CC and NSK 6010DDUC3 and the remaining parts above.

This table covers the wear sleeves used to restore a Transfer Case Input Shaft seal surface. Read more

3 Transfer Case Input Shaft Repair Sleeve parts for the 2018 Nissan Frontier come from 3 brands — BCA, NATIONAL and WJB / INMOTION PARTS. Every part fits both the 2.5L L4 and the 4.0L V6.

Part numbers include BCA NS99189, NATIONAL 99189 and WJB / INMOTION PARTS WS99189.

This table covers the seals at the Transfer Case Input Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Transfer Case Input Shaft Seal parts for the 2018 Nissan Frontier come from 2 brands — NATIONAL and WJB / INMOTION PARTS. Every part fits both the 2.5L L4 and the 4.0L V6.

Part numbers include NATIONAL 710696 and WJB / INMOTION PARTS WS710696.

This table covers the Transfer Case motors. Typical signs include no motion, a squeal, or a motor that only runs on one speed. Confirm power, ground and the control module before replacing the motor. Read more

5 Transfer Case Motor parts for the 2018 Nissan Frontier come from 5 brands — DORMAN, ACKOJA, LARES and 2 other brands. The "Popular" part is DORMAN 600919. 4 parts fit every engine; the other 1 is engine-specific.

Part numbers include DORMAN 600919, ACKOJA A38860001 and LARES 30905, among others listed above.

This table covers the Transfer Case Output Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

6 Transfer Case Output Shaft Bearing parts for the 2018 Nissan Frontier come from 3 brands — WJB / INMOTION PARTS, BCA and NATIONAL. The "Popular" part is WJB / INMOTION PARTS RB6207. Every part fits both the 2.5L L4 and the 4.0L V6.

The Economy section: 2 options from WJB / INMOTION PARTS. WJB / INMOTION PARTS RB6207 is listed in this group.

Standard Replacement: 4 parts, from BCA and NATIONAL. A representative part number is BCA WE61445.

Part numbers include WJB / INMOTION PARTS RB6207, WJB / INMOTION PARTS RB6208 and BCA WE61445, among others listed above.

This table covers the wear sleeves used to restore a Transfer Case Output Shaft seal surface. Read more

3 Transfer Case Output Shaft Repair Sleeve parts are listed for the 2018 Nissan Frontier, from BCA, NATIONAL and WJB / INMOTION PARTS. All of them fit every engine offered in the 2018 Frontier.

Part numbers include BCA NS99177, NATIONAL 99177 and WJB / INMOTION PARTS WS99177.

This table covers the seals at the Transfer Case Output Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

5 Transfer Case Output Shaft Seal parts are listed for the 2018 Nissan Frontier, from NATIONAL, WJB / INMOTION PARTS and BCA. NATIONAL 710917 carries the "Popular" badge. All of them fit every engine offered in the 2018 Frontier.

Part numbers include NATIONAL 710917, BCA NS710665 and NATIONAL 710665, among others listed above.

This table covers the seals at the Transfer Case Shift Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Transfer Case Shift Shaft Seal parts for the 2018 Nissan Frontier come from 3 brands — BCA, NATIONAL and WJB / INMOTION PARTS. Every part fits both the 2.5L L4 and the 4.0L V6.

Part numbers include BCA NS221710, NATIONAL 221710 and WJB / INMOTION PARTS WS221710.