12 Ignition parts are listed for the 2021 Nissan NP300, in 3 part types, covering both the 2.5L L4 and the 2.5L L4 DIESEL Turbocharged. Each one has a brand, a manufacturer part number and notes that say where it fits.
On the 2021 Nissan NP300, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules. All 12 listed parts are Crankshaft Position Sensor (5 parts), Camshaft Position Sensor (4 parts) and Ignition Coil (3 parts).
The 2021 Nissan NP300 was sold with both the 2.5L L4 and the 2.5L L4 DIESEL Turbocharged. Every part on this page is engine-specific. Each part shows which engine(s) it fits.
The most listed brands for 2021 Nissan NP300 ignition parts are STANDARD MOTOR PRODUCTS (8 parts), WALKER PRODUCTS (3 parts) and FVP (1 part). Quality grades include Economy, Standard Replacement and Premium.
Each part number listed for the 2021 Nissan NP300 opens a page with every vehicle that part fits.
Camshaft Position Sensor
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS Fits: 2.5L L4 | PC775T | 🇲🇽 MX | T-Series | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS Fits: 2.5L L4 | PC775 | 🇲🇽 MX | View on Amazon | |
| WALKER PRODUCTS Fits: 2.5L L4 | 2351188 | 🇲🇽 MX | Sensor Only | View on Amazon |
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS Fits: 2.5L L4 DIESEL Turbocharged | PC449 | 🇲🇽 MX | View on Amazon |
This table covers the sensors that report camshaft position to the ECU. Typical signs include a stall, a no-start, or a code for cam or crank correlation. Check the connector and the reluctor gap before replacing the sensor.
4 Camshaft Position Sensor parts are listed for the 2021 Nissan NP300, from STANDARD MOTOR PRODUCTS and WALKER PRODUCTS.
In the Economy grade, STANDARD MOTOR PRODUCTS supplies 1 part: the catalog's value-priced group. A representative part number is STANDARD MOTOR PRODUCTS PC775T.
The Standard Replacement section lists 2 options from STANDARD MOTOR PRODUCTS and WALKER PRODUCTS — built to original-equipment specification. STANDARD MOTOR PRODUCTS PC775 is listed in this group.
1 ungrouped part is not assigned to a grade, with the same engine-level match.
This group includes STANDARD MOTOR PRODUCTS PC775T, STANDARD MOTOR PRODUCTS PC775 and WALKER PRODUCTS 2351188 and the remaining parts above.
Crankshaft Position Sensor
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS Fits: 2.5L L4 | PC785T | 🇲🇽 MX | T-Series | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS Fits: 2.5L L4 | PC785 | 🇲🇽 MX | View on Amazon | |
| WALKER PRODUCTS Fits: 2.5L L4 | 2351403 | 🇲🇽 MX | Sensor Only | View on Amazon |
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS Fits: 2.5L L4 DIESEL Turbocharged | PC449 | 🇲🇽 MX | View on Amazon | |
| WALKER PRODUCTS Fits: 2.5L L4 DIESEL Turbocharged | 2351457 | 🇲🇽 MX | Sensor Only | View on Amazon |
This table covers the sensors that report crankshaft position and engine speed. Typical signs include a stall, a no-start, or a code for cam or crank correlation. Check the connector and the reluctor gap before replacing the sensor.
5 Crankshaft Position Sensor parts are listed for the 2021 Nissan NP300, from STANDARD MOTOR PRODUCTS and WALKER PRODUCTS.
Economy: 1 part, from STANDARD MOTOR PRODUCTS. A representative part number is STANDARD MOTOR PRODUCTS PC785T.
The Standard Replacement section: 2 options from STANDARD MOTOR PRODUCTS and WALKER PRODUCTS. STANDARD MOTOR PRODUCTS PC785 is listed in this group.
2 ungrouped parts are not assigned to a grade, with the same engine-level match.
Part numbers include STANDARD MOTOR PRODUCTS PC785T, STANDARD MOTOR PRODUCTS PC785 and WALKER PRODUCTS 2351403, among others listed above.
Ignition Coil
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FVP Fits: 2.5L L4 | UF549F | 🇲🇽 MX | View on Amazon | |
| STANDARD MOTOR PRODUCTS Fits: 2.5L L4 | UF549T | 🇲🇽 MX | T-Series | View on Amazon |
Premium
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS Fits: 2.5L L4 | UF549 | 🇲🇽 MX | Blue Streak | View on Amazon |
This table covers the coils that fire each spark plug. Typical signs include a misfire that follows one cylinder, a snap in damp weather, or a coil that is swollen or cracked. Swap a suspect coil with a neighbor to confirm, then replace boots that tore on the way off.
3 Ignition Coil parts are listed for the 2021 Nissan NP300, from STANDARD MOTOR PRODUCTS and FVP.
Economy: 2 parts, from FVP and STANDARD MOTOR PRODUCTS. A representative part number is FVP UF549F.
The Premium section lists 1 option from STANDARD MOTOR PRODUCTS — a step above OE specification in materials, tolerances or warranty terms. STANDARD MOTOR PRODUCTS UF549 is listed in this group.
Part numbers include FVP UF549F, STANDARD MOTOR PRODUCTS UF549T and STANDARD MOTOR PRODUCTS UF549.
Buying Ignition Parts for a 2021 Nissan NP300
On this vehicle, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules.
- Match the engine first. Every ignition part here is engine-specific; each row shows which engine(s) it fits.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Crankshaft Position Sensor and Camshaft Position Sensor .
Frequently Asked Questions
How many ignition parts fit the 2021 Nissan NP300?
Our catalog currently lists 12 ignition parts for the 2021 Nissan NP300 across 3 subcategories and 3 brands, covering both the 2.5L L4 and the 2.5L L4 DIESEL Turbocharged. Each part is matched to the engine(s) it fits.
Do ignition parts differ between 2021 Nissan NP300 engines?
Yes. Every ignition part on this page is engine-specific. Each row shows which engine(s) it fits — use the filter at the top to hide the rest. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.
What are the signs of ignition problems on a 2021 Nissan NP300?
Common symptoms include misfires under load, rough idle, flashing check-engine light, or poor starting in damp weather. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2021 Nissan NP300 was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 2021 Nissan NP300?
First match the engine — each row shows which engine(s) the part fits. Then gap matters even on “pre-gapped” plugs — verify against spec, and replace coil boots when they come off a high-mileage engine. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 2021 Nissan NP300
Ignition Parts for Other Nissan NP300 Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.