20 Steering parts are listed for the 2022 Nissan Versa, in 3 part types, covering the 1.6L L4 engine. Each one has a brand, a manufacturer part number and notes that say where it fits.
On the 2022 Nissan Versa, the steering system connects driver to road through the rack, pump, tie rods, and column components. All 20 listed parts are Tie Rod End (14 parts), Rack and Pinion (5 parts) and Rack and Pinion Bellow (1 part).
The 2022 Nissan Versa came with a single engine, the 1.6L L4, and every part is verified against it.
11 brands supply steering parts for the 2022 Nissan Versa, led by BECK/ARNLEY (4 parts), MOOG (3 parts) and DELPHI (2 parts), plus 8 more brands. Quality grades include Economy, Daily Driver and New.
A "Popular" badge means the source catalog flagged the part as frequently chosen for the 2022 Nissan Versa. 3 parts have it, including DELPHI TA5419 (Tie Rod End) and SUSPENSIA X36TE0718 (Tie Rod End). Each part number opens a page with every vehicle that part fits.
Rack and Pinion
New
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| EDELMANN | 57178 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | MANUAL | View on Amazon |
| SKP | SK1G3024 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Includes Inner Tie Rods | View on Amazon |
| TOP NOTCH | TNN10026 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | New | View on Amazon |
| ULTRA-POWER | 1G3024 | 🇺🇸 US 🇨🇦 CA | Includes Inner Tie Rods | View on Amazon |
Remanufactured
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MAVAL | 94494M | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Remanufactured Rack and Pinion Assembly | View on Amazon |
This table covers the steering gear assemblies that turn the tie rods. Typical signs include fluid at a torn boot, a growl when you turn, or play that the inner tie rods do not explain. Flush the old power-steering fluid with the rack — grit in the old fluid is the usual cause of a repeat leak.
5 Rack and Pinion parts are listed for the 2022 Nissan Versa, from EDELMANN, SKP, TOP NOTCH and 2 other brands.
In the New grade, EDELMANN, SKP, TOP NOTCH and 1 other brand supply 4 parts: brand-new units rather than rebuilt ones. A representative part number is EDELMANN 57178.
In the Remanufactured grade, MAVAL supplies 1 part: factory-rebuilt units with new wear components. A representative part number is MAVAL 94494M.
Listed part numbers: EDELMANN 57178, SKP SK1G3024 and TOP NOTCH TNN10026, plus the other parts above.
Rack and Pinion Bellow
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| BECK/ARNLEY | 1032914 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the rubber boots that seal the inner tie-rod joints on the rack.
This group shows a single part: BECK/ARNLEY 1032914.
Tie Rod End
Daily Driver
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DELPHI Popular | TA5419 | 🇺🇸 US 🇨🇦 CA | Right Outer | View on Amazon |
| SUSPENSIA Popular | X36TE0718 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front Right Outer | View on Amazon |
| SUSPENSIA Popular | X36TE0717 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front Left Outer | View on Amazon |
| DELPHI | TA5420 | 🇺🇸 US 🇨🇦 CA | Left Outer | View on Amazon |
| MOOG | ES801613 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front Left Outer | View on Amazon |
| MOOG | ES801612 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front Right Outer | View on Amazon |
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| BECK/ARNLEY | 1018836 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front Inner | View on Amazon |
| BECK/ARNLEY | 1018708 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front Left Outer | View on Amazon |
| BECK/ARNLEY | 1018709 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front Right Outer | View on Amazon |
| DORMAN | 545423 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front Left Outer | View on Amazon |
| DORMAN | 545424 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front Right Outer | View on Amazon |
| MEVOTECH | GS30679 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Original Grade | View on Amazon |
| MEVOTECH | GS30680 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Original Grade | View on Amazon |
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOOG | EV801839 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front Inner | View on Amazon |
This table covers the inner and outer tie-rod ends that steer each front knuckle. Typical signs include play on center, a feathered front tire, or a boot that has split and packed with grit. Replace inner and outer ends together on a high-mileage axle, then get an alignment.
14 Tie Rod End parts for the 2022 Nissan Versa come from 6 brands — MOOG, BECK/ARNLEY, DELPHI and 3 other brands. The "Popular" part is DELPHI TA5419.
In the Daily Driver grade, DELPHI, SUSPENSIA and MOOG supply 6 parts: grouped for everyday commuting duty. A representative part number is DELPHI TA5419.
The Economy section lists 7 options from BECK/ARNLEY, DORMAN and MEVOTECH — the catalog's value-priced group. BECK/ARNLEY 1018836 is listed in this group.
1 further part sits outside the graded sections, with the same engine-level match.
Buying Steering Parts for a 2022 Nissan Versa
On this vehicle, the steering system connects driver to road through the rack, pump, tie rods, and column components.
- Confirm you have the 1.6L L4 engine — every part on this page is matched to it.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace the inner and outer tie-rod ends together on higher-mileage vehicles, then get an alignment.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Tie Rod End and Rack and Pinion .
Frequently Asked Questions
How many steering parts fit the 2022 Nissan Versa?
Our catalog currently lists 20 steering parts for the 2022 Nissan Versa across 3 subcategories and 11 brands, covering the 1.6L L4 engine. Each part is matched to the engine(s) it fits.
What are the signs of steering problems on a 2022 Nissan Versa?
Common symptoms include play or looseness on center, a whine when turning, fluid weeping from rack boots, or uneven tire wear on the front axle. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, replace the inner and outer tie-rod ends together on higher-mileage vehicles, then get an alignment.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2022 Nissan Versa was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 2022 Nissan Versa?
Every part on this page is matched to the 1.6L L4 engine. Then flush old power-steering fluid when replacing a pump or rack — grit in the old fluid is the number-one cause of repeat failure. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 2022 Nissan Versa
Steering Parts for Other Nissan Versa Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.