10 Steering parts are listed for the 2024 Nissan Versa, in 3 part types, covering the 1.6L L4 engine. Each one has a brand, a manufacturer part number and notes that say where it fits.
The steering system on the 2024 Nissan Versa connects driver to road through the rack, pump, tie rods, and column components. All 10 listed parts are Tie Rod End (8 parts), Rack and Pinion (1 part) and Rack and Pinion Bellow (1 part).
The 2024 Nissan Versa came with a single engine, the 1.6L L4, and every part is verified against it.
4 brands supply steering parts for the 2024 Nissan Versa, led by BECK/ARNLEY (4 parts), MOOG (3 parts) and DORMAN (2 parts), plus 1 more brand. Quality grades include Economy and Daily Driver.
A "Popular" badge means the source catalog flagged the part as frequently chosen for the 2024 Nissan Versa. 2 parts have it, including MOOG ES801613 (Tie Rod End) and MOOG ES801612 (Tie Rod End). Each part number opens a page with every vehicle that part fits.
Rack and Pinion
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MAVAL | 94494M | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Remanufactured Rack and Pinion Assembly | View on Amazon |
This table covers the steering gear assemblies that turn the tie rods. Typical signs include fluid at a torn boot, a growl when you turn, or play that the inner tie rods do not explain. Flush the old power-steering fluid with the rack — grit in the old fluid is the usual cause of a repeat leak.
One part is listed for the 2024 Nissan Versa — MAVAL 94494M.
Rack and Pinion Bellow
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| BECK/ARNLEY | 1032914 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the rubber boots that seal the inner tie-rod joints on the rack.
This group shows a single part: BECK/ARNLEY 1032914.
Tie Rod End
Daily Driver
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOOG Popular | ES801613 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front Left Outer | View on Amazon |
| MOOG Popular | ES801612 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front Right Outer | View on Amazon |
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| BECK/ARNLEY | 1018836 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front Inner | View on Amazon |
| BECK/ARNLEY | 1018708 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front Left Outer | View on Amazon |
| BECK/ARNLEY | 1018709 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front Right Outer | View on Amazon |
| DORMAN | 545423 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front Left Outer | View on Amazon |
| DORMAN | 545424 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front Right Outer | View on Amazon |
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOOG | EV801839 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front Inner | View on Amazon |
This table covers the inner and outer tie-rod ends that steer each front knuckle. Typical signs include play on center, a feathered front tire, or a boot that has split and packed with grit. Replace inner and outer ends together on a high-mileage axle, then get an alignment.
8 Tie Rod End parts for the 2024 Nissan Versa come from 3 brands — MOOG, BECK/ARNLEY and DORMAN. The "Popular" part is MOOG ES801613.
In the Daily Driver grade, MOOG supplies 2 parts: grouped for everyday commuting duty. A representative part number is MOOG ES801613.
The Economy section lists 5 options from BECK/ARNLEY and DORMAN — the catalog's value-priced group. BECK/ARNLEY 1018836 is listed in this group.
1 further part sits outside the graded sections, with the same engine-level match.
Listed part numbers: MOOG ES801613, MOOG ES801612 and BECK/ARNLEY 1018836, plus the other parts above.
Buying Steering Parts for a 2024 Nissan Versa
On this vehicle, the steering system connects driver to road through the rack, pump, tie rods, and column components.
- Confirm you have the 1.6L L4 engine — every part on this page is matched to it.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace the inner and outer tie-rod ends together on higher-mileage vehicles, then get an alignment.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Tie Rod End and Rack and Pinion .
Frequently Asked Questions
How many steering parts fit the 2024 Nissan Versa?
Our catalog currently lists 10 steering parts for the 2024 Nissan Versa across 3 subcategories and 4 brands, covering the 1.6L L4 engine. Each part is matched to the engine(s) it fits.
What are the signs of steering problems on a 2024 Nissan Versa?
Common symptoms include play or looseness on center, a whine when turning, fluid weeping from rack boots, or uneven tire wear on the front axle. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, replace the inner and outer tie-rod ends together on higher-mileage vehicles, then get an alignment.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2024 Nissan Versa was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 2024 Nissan Versa?
Every part on this page is matched to the 1.6L L4 engine. Then flush old power-steering fluid when replacing a pump or rack — grit in the old fluid is the number-one cause of repeat failure. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 2024 Nissan Versa
Steering Parts for Other Nissan Versa Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.