2024 Nissan Frontier Engine Parts

This table covers the chains that drive the balance shafts. Read more

This group shows a single part: CLOYES C902.

This table covers the Balance Shaft Chain tensioners. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

One part is listed for the 2024 Nissan Frontier — CLOYES 95606.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

This group shows a single part: AJUSA 54327600.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

AJUSA supplies both parts for the 2024 Nissan Frontier.

Listed part numbers: AJUSA 15092900 and AJUSA 15127800.

This table covers the bolts that clamp the cylinder head to the block. Read more

This group shows a single part: AJUSA 81062500.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Cylinder Head Gasket parts for the 2024 Nissan Frontier come from AJUSA.

Listed part numbers: AJUSA 10270300, AJUSA 10270400 and AJUSA 52631100, plus the other parts above.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

This group shows a single part: AJUSA 52631000.

This table covers the Engine covers. Read more

3 Engine Cover parts for the 2024 Nissan Frontier come from TECHPRO. 1 part fits every engine; the other 2 are engine-specific.

Listed part numbers: TECHPRO NI1228187, TECHPRO NI1228172 and TECHPRO NI1228194.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

This group shows a single part: AJUSA 50558300.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

One part is listed for the 2024 Nissan Frontier — TOPLINE EVD53.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Intake Manifold Gasket parts for the 2024 Nissan Frontier come from AJUSA.

This group includes AJUSA 13339800, AJUSA 13339900 and AJUSA 77067300.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

One part is listed for the 2024 Nissan Frontier — TOPLINE IVD53.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

4 Motor Mount parts are listed for the 2024 Nissan Frontier, from SKP, ANCHOR, DEA / MARMON RIDE CONTROL and 1 other brand.

In the Economy grade, SKP supplies 1 part: the catalog's value-priced group. A representative part number is SKP SKM9506.

The Standard Replacement section lists 3 options from ANCHOR, DEA / MARMON RIDE CONTROL and WESTAR — built to original-equipment specification. ANCHOR 9506 is listed in this group.

Listed part numbers: SKP SKM9506, ANCHOR 9506 and DEA / MARMON RIDE CONTROL A4344, plus the other parts above.

This table covers the Motor Mount kits. Read more

ANCHOR supplies both parts for the 2024 Nissan Frontier.

Part numbers include ANCHOR 301185 and ANCHOR 301186.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

39 Oil parts are listed for the 2024 Nissan Frontier, from VALVOLINE, LIQUI MOLY, MOBIL and 3 other brands. LIQUI MOLY 22044 carries the "Popular" badge. Full Synthetic and High Mileage (>75,000 Miles) are all represented, and Full Synthetic alone accounts for 27 parts.

This table covers the heat exchangers that cool engine oil. Typical signs include oil at the cooler fittings, or coolant that looks like a milkshake. Pressure-test both circuits after a cooler swap — a leak here mixes oil and coolant. Read more

2 Oil Cooler parts are listed for the 2024 Nissan Frontier, from DORMAN and NISSENS.

Part numbers include DORMAN 918464 and NISSENS 91435.

This table covers the drain plugs in the oil pan. Read more

4 Oil Drain Plug parts are listed for the 2024 Nissan Frontier, from DORMAN, BECK/ARNLEY and REIN. 2 parts fit every engine; the other 2 are engine-specific.

This group includes BECK/ARNLEY 0160116, DORMAN 090038 and DORMAN 090049 and the remaining parts above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Oil Drain Plug Gasket parts for the 2024 Nissan Frontier come from 2 brands — DORMAN and AJUSA. 2 parts fit every engine; the other 1 is engine-specific.

This group includes AJUSA 01140600, DORMAN 097134 and DORMAN 997134CD.

This table covers the caps on the oil filler neck. Read more

3 Oil Filler Cap parts are listed for the 2024 Nissan Frontier, from CALORSTAT, GATES and MOTORAD.

This group includes CALORSTAT OC2316, GATES 31115 and MOTORAD MO107.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

14 Oil Filter parts are listed for the 2024 Nissan Frontier, from MOBIL, VARIOUS MFR, WIX and 7 other brands. MOBIL M1110A carries the "Popular" badge.

Economy: 4 parts, from FRAM, FVP, PRO-TEC and 1 other brand. A representative part number is FRAM FE7317.

In the High Performance / Heavy Duty grade, MOBIL and WIX supply 3 parts: grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. A representative part number is MOBIL M1110A.

The Standard Replacement section: 6 options from WIX, ACDELCO, BECK/ARNLEY and 3 other brands. WIX 51358 is listed in this group.

1 ungrouped part is not assigned to a grade, with the same engine-level match.

This table covers the oil pans that hold the engine's oil sump. Read more

2 Oil Pan parts for the 2024 Nissan Frontier come from 2 brands — AUTOTECNICA and SPECTRA PREMIUM. 1 part fits every engine; the other 1 is engine-specific.

Listed part numbers: AUTOTECNICA NI1415223 and SPECTRA PREMIUM NSP29A.

This table covers the Oil Pump sprockets. Read more

This group shows a single part: CLOYES S945.

This table covers the timing chains that keep the cams in time with the crank. Read more

This group shows a single part: CLOYES C983.

This table covers the guides and dampers that keep the timing chain on its path. Read more

2 Timing Chain Guide / Damper parts for the 2024 Nissan Frontier come from CLOYES.

Listed part numbers: CLOYES 95609 and CLOYES 95608.

This table covers the tensioners that keep the timing chain taut. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

One part is listed for the 2024 Nissan Frontier — CLOYES 96132.

This table covers the crankshaft sprockets that drive the timing chain or belt. Read more

One part is listed for the 2024 Nissan Frontier — CLOYES S907.

This table covers the Valve covers. Read more

2 Valve Cover parts for the 2024 Nissan Frontier come from 2 brands — AUTOTECNICA and DORMAN. 1 part fits every engine; the other 1 is engine-specific.

This group includes AUTOTECNICA NI1422902 and DORMAN 264787.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Valve Cover Gasket parts are listed for the 2024 Nissan Frontier, from AJUSA, DORMAN and ULTRA-POWER.

Listed part numbers: AJUSA 56041200, AJUSA 56092800 and DORMAN 953018, plus the other parts above.

This table covers the pressed-in bronze and cast-iron guides that align valve stems. Typical signs include oil smoke on startup, a guide that has gone oval, or a valve that no longer seats quietly. Guides are a machine-shop fit. Confirm stem diameter in the notes before ordering. Read more

TOPLINE supplies both parts for the 2024 Nissan Frontier.

This group includes TOPLINE EVGD52 and TOPLINE IVGD52.

This table covers the keepers that lock each valve-spring retainer to the stem. Read more

2 Valve Spring Retainer Keeper parts for the 2024 Nissan Frontier come from 2 brands — MELLING and SBI.

This group includes MELLING VL730 and SBI 1211064.

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

5 Valve Stem Seal parts are listed for the 2024 Nissan Frontier, from AJUSA, FEL-PRO, SBI and 1 other brand. FEL-PRO SS72821 carries the "Popular" badge.

Part numbers include FEL-PRO SS72821, AJUSA 12012100 and AJUSA 57058800, among others listed above.

This table covers the oil-control solenoids that command the cam phasers. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same. Read more

5 Variable Valve Timing (VVT) Solenoid / Actuator parts are listed for the 2024 Nissan Frontier, from STANDARD MOTOR PRODUCTS, HOLSTEIN, WELLS and 1 other brand.

Economy: 2 parts, from HOLSTEIN and WELLS. A representative part number is HOLSTEIN 2VTS0279.

The Standard Replacement section: 2 options from CLOYES and STANDARD MOTOR PRODUCTS. CLOYES VTS204 is listed in this group.

1 ungrouped part is not assigned to a grade, with the same engine-level match.

This group includes HOLSTEIN 2VTS0279, WELLS 2T1172 and CLOYES VTS204 and the remaining parts above.