The 2019 Nissan Frontier has 516 engine parts with verified fitment on this page — 60 part types and 70 brands, covering both the 2.5L L4 and the 4.0L V6. Each part includes a manufacturer part number and application notes.
The engine on the 2019 Nissan Frontier covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components. The largest groups are Oil (52 parts), Variable Valve Timing (VVT) Solenoid / Actuator (42 parts) and Oil Filter (32 parts). The other 57 part types cover the remaining 390 parts.
The 2019 Nissan Frontier was sold with both the 2.5L L4 and the 4.0L V6. 93 parts fit every engine; the other 423 are engine-specific. Each part shows which engine(s) it fits.
The most listed brands for 2019 Nissan Frontier engine parts are S.A. GEAR (31 parts), CLOYES (30 parts) and TOPLINE (29 parts), plus 67 more brands. Quality grades include Standard Replacement, Economy and Premium.
89 parts on this 2019 Nissan Frontier page carry a "Popular" badge — the source catalog's flag for options frequently chosen for this vehicle — including CLOYES C902 (Balance Shaft Chain) and ENGINETECH NI40CSA (Conversion / Lower Gasket Set). Click any part number to see every vehicle that part fits.
Balance Shaft Chain
Chain Only
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| CLOYES Popular Fits: 2.5L L4 | C902 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| MELLING Popular Fits: 2.5L L4 | 1053 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| PREFERRED COMPONENTS INC Fits: 2.5L L4 | C765 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| S.A. GEAR Fits: 2.5L L4 | C1019 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| S.A. GEAR Fits: 2.5L L4 | 76319P | 🇺🇸 US 🇨🇦 CA | Includes Balance Shaft Sprocket, Chain, Tensioner | View on Amazon |
Kit
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Fits: 2.5L L4 | TS765 | 🇺🇸 US 🇨🇦 CA | Kit | View on Amazon |
| MELLING Fits: 2.5L L4 | 31053SX | 🇺🇸 US 🇨🇦 CA | KitDoes Not Include Sprockets | View on Amazon |
| MELLING Fits: 2.5L L4 | 31053S | 🇺🇸 US 🇨🇦 CA | Kit | View on Amazon |
This table covers the chains that drive the balance shafts.
8 Balance Shaft Chain parts for the 2019 Nissan Frontier come from 5 brands — MELLING, S.A. GEAR, CLOYES and 2 other brands. The "Popular" part is CLOYES C902.
In the Chain Only grade, S.A. GEAR, CLOYES, MELLING and 1 other brand supply 5 parts: grouped under the catalog's "Chain Only" designation — the notes column spells out what sets them apart. A representative part number is CLOYES C902.
The Kit section lists 3 options from MELLING and ENGINETECH — grouped under the catalog's "Kit" designation — the notes column spells out what sets them apart. ENGINETECH TS765 is listed in this group.
This group includes CLOYES C902, MELLING 1053 and PREFERRED COMPONENTS INC C765 and the remaining parts above.
Balance Shaft Chain Tensioner
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| CLOYES Fits: 2.5L L4 | 95606 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| MELLING Fits: 2.5L L4 | BT7013 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| S.A. GEAR Fits: 2.5L L4 | 91061 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the Balance Shaft Chain tensioners. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage.
3 Balance Shaft Chain Tensioner parts are listed for the 2019 Nissan Frontier, from CLOYES, MELLING and S.A. GEAR.
This group includes CLOYES 95606, MELLING BT7013 and S.A. GEAR 91061.
Balance Shaft Sprocket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MELLING Fits: 2.5L L4 | S945 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| S.A. GEAR Fits: 2.5L L4 | S1304 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the Balance Shaft sprockets.
2 Balance Shaft Sprocket parts for the 2019 Nissan Frontier come from 2 brands — MELLING and S.A. GEAR.
Listed part numbers: MELLING S945 and S.A. GEAR S1304.
Connecting Rod
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Fits: 2.5L L4 | ECR117 | 🇺🇸 US | Reconditioned | View on Amazon |
| TOPLINE Fits: 2.5L L4 | CRD42 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the connecting rods between each piston and the crankshaft.
2 Connecting Rod parts for the 2019 Nissan Frontier come from 2 brands — ENGINETECH and TOPLINE.
Part numbers include ENGINETECH ECR117 and TOPLINE CRD42.
Connecting Rod Bearing
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| KING ENGINE BEARINGS Fits: 2.5L L4 | CR4533SI | 🇺🇸 US 🇨🇦 CA | SetBimetal (Aluminum Silicon Base) | View on Amazon |
| KING ENGINE BEARINGS Fits: 4.0L V6 | CR6840CP | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | SetTrimetal | View on Amazon |
| SEALED POWER Fits: 4.0L V6 | 66030P | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Set | View on Amazon |
| TOPLINE Fits: 2.5L L4 | RBD42 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
| TOPLINE Fits: 4.0L V6 | RBD45 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Set | View on Amazon |
This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.
5 Connecting Rod Bearing parts for the 2019 Nissan Frontier come from 3 brands — KING ENGINE BEARINGS, TOPLINE and SEALED POWER.
Part numbers include KING ENGINE BEARINGS CR4533SI, KING ENGINE BEARINGS CR6840CP and SEALED POWER 66030P, among others listed above.
Conversion / Lower Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Popular Fits: 4.0L V6 | NI40CSA | 🇺🇸 US | Gas | View on Amazon |
| ULTRA-POWER Popular Fits: 2.5L L4 | CS262611 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
| AJUSA Fits: 2.5L L4 | 54270800 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| AJUSA Fits: 4.0L V6 | 54247900 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Gas | View on Amazon |
| APEX Fits: 2.5L L4 | ACS5059 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| APEX Fits: 4.0L V6 | ACS5055 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| FEL-PRO Fits: 2.5L L4 | CS262611 | 🇺🇸 US 🇨🇦 CA | Includes RTV Sealant | View on Amazon |
| FEL-PRO Fits: 4.0L V6 | CS26370 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Includes RTV Sealant | View on Amazon |
| ITM ENGINE COMPONENTS Fits: 4.0L V6 | 0924010 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| TOPLINE Fits: 2.5L L4 | CBSD42 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
10 Conversion / Lower Gasket Set parts for the 2019 Nissan Frontier come from 7 brands — AJUSA, APEX, FEL-PRO and 4 other brands. The "Popular" part is ENGINETECH NI40CSA.
Crankshaft
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Fits: 4.0L V6 | 838500 | 🇺🇸 US | Remanufactured | View on Amazon |
This table covers the crankshafts that turn piston motion into rotation.
This group shows a single part: ENGINETECH 838500.
Crankshaft Main Bearing
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Popular Fits: 4.0L V6 | BC1212 | 🇺🇸 US | Set | View on Amazon |
| MAHLE / CLEVITE Popular Fits: 4.0L V6 | MS2343P | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | P Series (Tri-Metal)Set | View on Amazon |
| KING ENGINE BEARINGS Fits: 2.5L L4 | MB5664AM | 🇺🇸 US 🇨🇦 CA | SetBimetal (Aluminum Base) | View on Amazon |
| KING ENGINE BEARINGS Fits: 4.0L V6 | MB4510CP | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | SetTrimetal | View on Amazon |
| SEALED POWER Fits: 4.0L V6 | 7466M | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Set | View on Amazon |
| TOPLINE Fits: 2.5L L4 | TWD42 | 🇺🇸 US 🇨🇦 CA | Thrust Bearing | View on Amazon |
| TOPLINE Fits: 2.5L L4 | MBD42 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
| TOPLINE Fits: 4.0L V6 | TWD45 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Thrust Bearing | View on Amazon |
| TOPLINE Fits: 4.0L V6 | MBD45 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Set | View on Amazon |
This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.
9 Crankshaft Main Bearing parts are listed for the 2019 Nissan Frontier, from TOPLINE, KING ENGINE BEARINGS, ENGINETECH and 2 other brands. ENGINETECH BC1212 carries the "Popular" badge.
Listed part numbers: ENGINETECH BC1212, MAHLE / CLEVITE MS2343P and KING ENGINE BEARINGS MB5664AM, plus the other parts above.
Crankshaft Repair Sleeve
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| BCA Fits: 4.0L V6 | NS99189 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front | View on Amazon |
| NATIONAL Fits: 2.5L L4 | 99181 | 🇺🇸 US 🇨🇦 CA | Front | View on Amazon |
| NATIONAL Fits: 4.0L V6 | 99189 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front | View on Amazon |
| WJB / INMOTION PARTS Fits: 2.5L L4 | WS99181 | 🇺🇸 US 🇨🇦 CA | Front | View on Amazon |
| WJB / INMOTION PARTS Fits: 4.0L V6 | WS99189 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front | View on Amazon |
This table covers the sleeves used to restore a grooved crankshaft seal surface.
5 Crankshaft Repair Sleeve parts are listed for the 2019 Nissan Frontier, from NATIONAL, WJB / INMOTION PARTS and BCA.
Listed part numbers: BCA NS99189, NATIONAL 99181 and NATIONAL 99189, plus the other parts above.
Crankshaft Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Popular Fits: all 2019 Frontier engines | BS40694 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rubber | View on Amazon |
| MAHLE / CLEVITE Popular Fits: 2.5L L4 | 67119 | 🇺🇸 US 🇨🇦 CA | Rubber | View on Amazon |
| NATIONAL Popular Fits: 2.5L L4 | 224650 | 🇺🇸 US 🇨🇦 CA | Front | View on Amazon |
| NATIONAL Popular Fits: all 2019 Frontier engines | 228411 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear | View on Amazon |
| WJB / INMOTION PARTS Popular Fits: 2.5L L4 | WS224650 | 🇺🇸 US 🇨🇦 CA | Front | View on Amazon |
| WJB / INMOTION PARTS Popular Fits: 4.0L V6 | WS710356 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front | View on Amazon |
| AJUSA Fits: all 2019 Frontier engines | 15060100 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | RearCounter Clockwise | View on Amazon |
| AJUSA Fits: 2.5L L4 | 15045100 | 🇺🇸 US 🇨🇦 CA | FrontClockwise | View on Amazon |
| AJUSA Fits: 4.0L V6 | 15052800 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | FrontClockwise | View on Amazon |
| APEX Fits: all 2019 Frontier engines | ABS551 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear | View on Amazon |
| APEX Fits: 2.5L L4 | ATC5510 | 🇺🇸 US 🇨🇦 CA | Front | View on Amazon |
| BCA Fits: all 2019 Frontier engines | NS228411 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear | View on Amazon |
| BCA Fits: 4.0L V6 | NS710356 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front | View on Amazon |
| FEL-PRO Fits: 2.5L L4 | TCS45056 | 🇺🇸 US 🇨🇦 CA | Front | View on Amazon |
| JAPANESE OE Fits: 4.0L V6 | N2350 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Musashi | View on Amazon |
| NATIONAL Fits: 4.0L V6 | 710356 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front | View on Amazon |
| SCHAEFFLER Fits: 2.5L L4 | SS2845 | 🇺🇸 US 🇨🇦 CA | Front2.29" O.D. X 0.28" Width | View on Amazon |
| SCHAEFFLER Fits: all 2019 Frontier engines | SS3332 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear3.76" O.D. X 0.63" Width | View on Amazon |
| SCHAEFFLER Fits: 4.0L V6 | SS3780 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front7.01 mm Width | View on Amazon |
| ULTRA-POWER Fits: 2.5L L4 | TCS45056 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
| VICTOR REINZ Fits: 2.5L L4 | 814127100 | 🇺🇸 US 🇨🇦 CA | Front | View on Amazon |
| VICTOR REINZ Fits: all 2019 Frontier engines | 814127200 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rubber | View on Amazon |
| VICTOR REINZ Fits: 2.5L L4 | 191013001 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
| WJB / INMOTION PARTS Fits: all 2019 Frontier engines | WS228411 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear | View on Amazon |
This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
24 Crankshaft Seal parts are listed for the 2019 Nissan Frontier, from NATIONAL, WJB / INMOTION PARTS, AJUSA and 8 other brands. FEL-PRO BS40694 carries the "Popular" badge. 8 parts fit every engine; the other 16 are engine-specific.
Cylinder Head Bolt
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Popular Fits: 4.0L V6 | 81047800 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| ENGINETECH Popular Fits: 4.0L V6 | HB182 | 🇺🇸 US | Set | View on Amazon |
| MAHLE / CLEVITE Popular Fits: 2.5L L4 | GS33509 | 🇺🇸 US 🇨🇦 CA | Cylinder Head Bolt KitSet | View on Amazon |
| AJUSA Fits: 2.5L L4 | 81043000 | 🇺🇸 US 🇨🇦 CA | Torque To Yield | View on Amazon |
| APEX Fits: 2.5L L4 | AHB558 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
| APEX Fits: 4.0L V6 | AHB534 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Set | View on Amazon |
| BECK/ARNLEY Fits: 2.5L L4 | 0161073 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
| BECK/ARNLEY Fits: 4.0L V6 | 0161026 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Set | View on Amazon |
| FEL-PRO Fits: 2.5L L4 | ES72198 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
| FEL-PRO Fits: 4.0L V6 | ES72900 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Set | View on Amazon |
| MAHLE / CLEVITE Fits: 4.0L V6 | GS33400 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Cylinder Head Bolt KitSet | View on Amazon |
| TOPLINE Fits: 4.0L V6 | HBD34 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Set | View on Amazon |
This table covers the bolts that clamp the cylinder head to the block.
12 Cylinder Head Bolt parts for the 2019 Nissan Frontier come from 7 brands — AJUSA, MAHLE / CLEVITE, APEX and 4 other brands. The "Popular" part is AJUSA 81047800.
Cylinder Head Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Popular Fits: 2.5L L4 | 26520PT | 🇺🇸 US 🇨🇦 CA | Perma TorqueMLS | View on Amazon |
| FEL-PRO Popular Fits: 4.0L V6 | 26370PT | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Perma TorqueMLS | View on Amazon |
| FEL-PRO Popular Fits: 4.0L V6 | 26371PT | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Perma TorqueMLS | View on Amazon |
| ULTRA-POWER Popular Fits: 4.0L V6 | 26371PT | 🇺🇸 US 🇨🇦 CA | Head Bolt Replacement RecommendedHead Bolts Not Included | View on Amazon |
| AJUSA Fits: 2.5L L4 | 10231200 | 🇺🇸 US 🇨🇦 CA | Multi Layered Steel | View on Amazon |
| AJUSA Fits: 4.0L V6 | 10174700 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Multi Layered Steel | View on Amazon |
| AJUSA Fits: 4.0L V6 | 10174600 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Multi Layered Steel | View on Amazon |
| APEX Fits: 2.5L L4 | AHG559 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| APEX Fits: 4.0L V6 | AHG555R | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Right | View on Amazon |
| APEX Fits: 4.0L V6 | AHG555L | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Left | View on Amazon |
| ENGINETECH Fits: 4.0L V6 | HNI40LA | 🇺🇸 US | Multi-Layered Steel (MLS) | View on Amazon |
| ENGINETECH Fits: 4.0L V6 | HNI40RA | 🇺🇸 US | Multi-Layered Steel (MLS) | View on Amazon |
| MAHLE / CLEVITE Fits: 2.5L L4 | 54594 | 🇺🇸 US 🇨🇦 CA | Multi-Layered Steel | View on Amazon |
| MAHLE / CLEVITE Fits: 4.0L V6 | 54479 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Multi-Layered Steel | View on Amazon |
| MAHLE / CLEVITE Fits: 4.0L V6 | 54480 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Multi-Layered Steel | View on Amazon |
| TOPLINE Fits: 2.5L L4 | HDGD42F | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| ULTRA-POWER Fits: 2.5L L4 | 26520PT | 🇺🇸 US 🇨🇦 CA | Head Bolt Replacement RecommendedHead Bolts Not Included | View on Amazon |
| VICTOR REINZ Fits: 2.5L L4 | 611109100 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| VICTOR REINZ Fits: 4.0L V6 | 615367000 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Improved Design | View on Amazon |
| VICTOR REINZ Fits: 4.0L V6 | 615366500 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Improved Design | View on Amazon |
This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
20 Cylinder Head Gasket parts for the 2019 Nissan Frontier come from 8 brands — FEL-PRO, AJUSA, APEX and 5 other brands. The "Popular" part is FEL-PRO 26520PT.
Cylinder Head Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| APEX Popular Fits: 2.5L L4 | AHS5059 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| ENGINETECH Popular Fits: 4.0L V6 | NI40HSA | 🇺🇸 US | with MLS head gaskets | View on Amazon |
| FEL-PRO Popular Fits: 2.5L L4 | HS26520PT | 🇺🇸 US 🇨🇦 CA | Includes Permadry Molded Rubber Valve Cover Gasket(s), Valve Stem Seals | View on Amazon |
| FEL-PRO Popular Fits: 4.0L V6 | HS26370PT | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Includes Permadry Molded Rubber Valve Cover Gasket(s), Valve Stem Seals | View on Amazon |
| AJUSA Fits: 2.5L L4 | 52513900 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| AJUSA Fits: 4.0L V6 | 52480000 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Complete Set | View on Amazon |
| AJUSA Fits: 4.0L V6 | 52666200 | 🇺🇸 US 🇨🇦 CA | Complete Set | View on Amazon |
| APEX Fits: 4.0L V6 | AHS5055 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| ENGINETECH Fits: 4.0L V6 | NI40HSAWB | 🇺🇸 US | Includes Head Boltswith MLS head gaskets | View on Amazon |
| FEL-PRO Fits: 2.5L L4 | HS26520PTVK | 🇺🇸 US 🇨🇦 CA | Includes Head Bolts, Permadry Molded Rubber Valve Cover Gasket(s), Valve Stem Seals | View on Amazon |
| MAHLE / CLEVITE Fits: 2.5L L4 | HS54594 | 🇺🇸 US 🇨🇦 CA | Includes Valve Stem Seals | View on Amazon |
| TOPLINE Fits: 2.5L L4 | HSD42F | 🇺🇸 US 🇨🇦 CA | Includes Valve Stem Seals | View on Amazon |
| TOPLINE Fits: 4.0L V6 | HSD45 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Includes Valve Stem Seals | View on Amazon |
| ULTRA-POWER Fits: 4.0L V6 | HS26370PT | 🇺🇸 US 🇨🇦 CA | Head Bolts Not IncludedHead Bolt Replacement Recommended | View on Amazon |
This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
14 Cylinder Head Gasket Set parts for the 2019 Nissan Frontier come from 7 brands — FEL-PRO, AJUSA, APEX and 4 other brands. The "Popular" part is APEX AHS5059.
Cylinder Head Spacer Shim
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| SBI Fits: 2.5L L4 | 2302139 | 🇺🇸 US 🇨🇦 CA | New Height - 5.095 - 5.100Minimum Height - 5.085 | View on Amazon |
This table covers the Cylinder Head Spacer shims.
This group shows a single part: SBI 2302139.
Engine Block Heater
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| KAT'S HEATERS Fits: 2.5L L4 | 28400 | 🇺🇸 US 🇨🇦 CA | Engine Heater Replacement Cord | View on Amazon |
| KAT'S HEATERS Fits: all 2019 Frontier engines | 28500 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Engine Heater Replacement Cord | View on Amazon |
This table covers the block heaters that warm the coolant or oil in cold weather.
KAT'S HEATERS supplies both parts for the 2019 Nissan Frontier. 1 part fits every engine; the other 1 is engine-specific.
Listed part numbers: KAT'S HEATERS 28400 and KAT'S HEATERS 28500.
Engine Cover
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| TECHPRO Fits: all 2019 Frontier engines | NI1228172 | 🇺🇸 US 🇨🇦 CA | Lower4WD | View on Amazon |
This table covers the Engine covers.
This group shows a single part: TECHPRO NI1228172.
Engine Kit Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 2.5L L4 | 50464000 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| AJUSA Fits: 4.0L V6 | 50433600 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Gas | View on Amazon |
| AJUSA Fits: 4.0L V6 | 50587300 | 🇺🇸 US 🇨🇦 CA | Flex Fuel | View on Amazon |
| ENGINETECH Fits: 4.0L V6 | NI40K1 | 🇺🇸 US | with MLS head gaskets | View on Amazon |
| TOPLINE Fits: 2.5L L4 | CGSD42F | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| TOPLINE Fits: 4.0L V6 | CGSD45 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
6 Engine Kit Gasket Set parts for the 2019 Nissan Frontier come from 3 brands — AJUSA, TOPLINE and ENGINETECH.
Part numbers include AJUSA 50464000, AJUSA 50433600 and AJUSA 50587300, among others listed above.
Exhaust Valve
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| TOPLINE Fits: 2.5L L4 | EVD42 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| TOPLINE Fits: 4.0L V6 | EVD41L | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one.
TOPLINE supplies both parts for the 2019 Nissan Frontier.
Part numbers include TOPLINE EVD42 and TOPLINE EVD41L.
Harmonic Balancer
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ATP Fits: 2.5L L4 | 102419 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| ATP Fits: 4.0L V6 | 102414 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| DAYCO Fits: 2.5L L4 | PB1576N | 🇺🇸 US 🇨🇦 CA | Premium | View on Amazon |
| DAYCO Fits: 4.0L V6 | PB1664N | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Premium | View on Amazon |
| DORMAN Fits: 2.5L L4 | 594301 | 🇺🇸 US 🇨🇦 CA | SerpentineDiameter | View on Amazon |
| ULTRA-POWER Fits: 2.5L L4 | 594620 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the crankshaft pulleys / harmonic balancers at the front of the engine.
6 Harmonic Balancer parts for the 2019 Nissan Frontier come from 4 brands — ATP, DAYCO, DORMAN and 1 other brand.
Listed part numbers: ATP 102419, ATP 102414 and DAYCO PB1576N, plus the other parts above.
Intake Manifold Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Popular Fits: 2.5L L4 | MS97149 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
| AJUSA Fits: 4.0L V6 | 13349600 | 🇺🇸 US 🇨🇦 CA | Flex Fuel | View on Amazon |
| APEX Fits: 2.5L L4 | AMS5590 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
| APEX Fits: 4.0L V6 | AMS5550 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Set | View on Amazon |
| BECK/ARNLEY Fits: 2.5L L4 | 0376188 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
| FEL-PRO Fits: 4.0L V6 | MS964542 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Set | View on Amazon |
| MAHLE / CLEVITE Fits: 2.5L L4 | MS19421 | 🇺🇸 US 🇨🇦 CA | SetMolded Rubber | View on Amazon |
| ULTRA-POWER Fits: 4.0L V6 | MS964542 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
| VICTOR REINZ Fits: 2.5L L4 | 111067201 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
9 Intake Manifold Gasket parts for the 2019 Nissan Frontier come from 7 brands — FEL-PRO, APEX, AJUSA and 4 other brands. The "Popular" part is FEL-PRO MS97149.
This group includes FEL-PRO MS97149, AJUSA 13349600 and APEX AMS5590 and the remaining parts above.
Intake Manifold Runner Control Valve / Solenoid
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Fits: 4.0L V6 | 911506 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| STANDARD MOTOR PRODUCTS Fits: 4.0L V6 | RCS103 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| ULTRA-POWER Fits: 4.0L V6 | 911506 | 🇺🇸 US 🇨🇦 CA | Intake Manifold SolenoidINTAKE MANIFOLD RUNNER SOLENOID | View on Amazon |
This table covers the Intake Manifold Runner Control Valve solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid.
3 Intake Manifold Runner Control Valve / Solenoid parts for the 2019 Nissan Frontier come from 3 brands — DORMAN, STANDARD MOTOR PRODUCTS and ULTRA-POWER.
Listed part numbers: DORMAN 911506 and STANDARD MOTOR PRODUCTS RCS103, plus the other parts above.
Intake Plenum Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Popular Fits: 4.0L V6 | MS96943 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Upper | View on Amazon |
| AJUSA Fits: 4.0L V6 | 01149900 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | without FLEX FUEL | View on Amazon |
| APEX Fits: 4.0L V6 | AMS5551 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Upper | View on Amazon |
| DORMAN Fits: 4.0L V6 | 953307 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Set | View on Amazon |
| ULTRA-POWER Fits: 4.0L V6 | MS96943 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
This table covers the gaskets that seal the Intake Plenum. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
5 Intake Plenum Gasket parts are listed for the 2019 Nissan Frontier, from FEL-PRO, AJUSA, APEX and 2 other brands. FEL-PRO MS96943 carries the "Popular" badge.
Listed part numbers: FEL-PRO MS96943, AJUSA 01149900 and APEX AMS5551, plus the other parts above.
Intake Valve
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| TOPLINE Fits: 2.5L L4 | IVD42 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| TOPLINE Fits: 4.0L V6 | IVD41L | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one.
TOPLINE supplies both parts for the 2019 Nissan Frontier.
Part numbers include TOPLINE IVD42 and TOPLINE IVD41L.
Motor Mount
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| SKP Fits: 4.0L V6 | SKM9506 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Fits Front Right | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ANCHOR Fits: 4.0L V6 | 9506 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Fits Front Right | View on Amazon |
| DEA / MARMON RIDE CONTROL Fits: 4.0L V6 | A4344 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Fits Front Right | View on Amazon |
| WESTAR Fits: 4.0L V6 | EM9506 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front | View on Amazon |
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ANCHOR Fits: 2.5L L4 | 9483 | 🇺🇸 US 🇨🇦 CA | Fits Front Right | View on Amazon |
| DEA / MARMON RIDE CONTROL Fits: 2.5L L4 | A4349 | 🇺🇸 US 🇨🇦 CA | Fits Front Right | View on Amazon |
| PIONEER Fits: 2.5L L4 | 604343 | 🇺🇸 US 🇨🇦 CA | Rear | View on Amazon |
| PIONEER Fits: 2.5L L4 | 604349 | 🇺🇸 US 🇨🇦 CA | Fits Front Right | View on Amazon |
This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes.
8 Motor Mount parts are listed for the 2019 Nissan Frontier, from ANCHOR, DEA / MARMON RIDE CONTROL, PIONEER and 2 other brands.
In the Economy grade, SKP supplies 1 part: the catalog's value-priced group. A representative part number is SKP SKM9506.
The Standard Replacement section lists 3 options from ANCHOR, DEA / MARMON RIDE CONTROL and WESTAR — built to original-equipment specification. ANCHOR 9506 is listed in this group.
4 ungrouped parts are not assigned to a grade, with the same engine-level match.
This group includes SKP SKM9506, ANCHOR 9506 and DEA / MARMON RIDE CONTROL A4344 and the remaining parts above.
Motor Mount Kit
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ANCHOR Fits: 2.5L L4 | 300138 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| ANCHOR Fits: 4.0L V6 | 300140 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | RWD | View on Amazon |
| ANCHOR Fits: 4.0L V6 | 300139 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | 4WD | View on Amazon |
| WESTAR Fits: 4.0L V6 | ETK092 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | RWD | View on Amazon |
| WESTAR Fits: 4.0L V6 | ETK093 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | 4WD | View on Amazon |
This table covers the Motor Mount kits.
5 Motor Mount Kit parts are listed for the 2019 Nissan Frontier, from ANCHOR and WESTAR.
This group includes ANCHOR 300138, ANCHOR 300140 and ANCHOR 300139 and the remaining parts above.
Oil
Summary: Notes list SAE 0W-30 and SAE 5W-30. Confirm the engine and the weight on the filler cap before you buy. Both engines share the same viscosities. Replacement brands in this table include LIQUI MOLY, VALVOLINE and MOBIL.
Conventional
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| LUCAS OIL Fits: all 2019 Frontier engines | 10474 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | CONVENTIONAL MOTOR OIL SAE 5W-301 qt | View on Amazon |
| LUCAS OIL Fits: all 2019 Frontier engines | 18010 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Conventional Motor Oil SAE 5W-306 Gallon | View on Amazon |
Full Synthetic
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| LIQUI MOLY Popular Fits: all 2019 Frontier engines | 20228 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Molygen New Generation 5W-305 Liter | View on Amazon |
| MOBIL Popular Fits: all 2019 Frontier engines | 125195 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Full Synthetic 5W-30Mobil Full Synthetic | View on Amazon |
| MOBIL Popular Fits: all 2019 Frontier engines | 124315 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | 5W-30Mobil 1 Advanced | View on Amazon |
| IDEMITSU Fits: all 2019 Frontier engines | 30015204750 | 🇺🇸 US | IFG3 5W-30 SP/Motor Oil1 Quart | View on Amazon |
| IDEMITSU Fits: all 2019 Frontier engines | 30016052750 | 🇺🇸 US | IFG3 5W-30 SQ/GF-7A1 Quart | View on Amazon |
| IDEMITSU Fits: all 2019 Frontier engines | 30013015750 | 🇺🇸 US | Full Synthetic 5W-30 GF-6/SP1 Quart | View on Amazon |
| IDEMITSU Fits: all 2019 Frontier engines | 30016052953 | 🇺🇸 US | IFG3 5W-30 SQ/GF-7A5 Quart | View on Amazon |
| IDEMITSU Fits: all 2019 Frontier engines | 30013015953 | 🇺🇸 US | Full Synthetic 5W-30 GF-6/SP5 Quart | View on Amazon |
| LIQUI MOLY Fits: all 2019 Frontier engines | 20136 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Special Tec AA 5W-301 Liter | View on Amazon |
| LIQUI MOLY Fits: all 2019 Frontier engines | 20226 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Molygen New Generation 5W-301 Liter | View on Amazon |
| LIQUI MOLY Fits: all 2019 Frontier engines | 22260 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Special Tec B FE 0W-301 Liter | View on Amazon |
| LIQUI MOLY Fits: all 2019 Frontier engines | 20446 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Top Tec 4600 5W-301 Liter | View on Amazon |
| LIQUI MOLY Fits: all 2019 Frontier engines | 2038 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Longtime High Tech 5W-301 Liter | View on Amazon |
| LIQUI MOLY Fits: all 2019 Frontier engines | 22156 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Top Tec 4210 0W-301 Liter | View on Amazon |
| LIQUI MOLY Fits: all 2019 Frontier engines | 2004 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Top Tec 4200 5W-301 Liter | View on Amazon |
| LIQUI MOLY Fits: all 2019 Frontier engines | 20138 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Special Tec AA 5W-305 Liter | View on Amazon |
| LIQUI MOLY Fits: all 2019 Frontier engines | 2039 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Longtime High Tech 5W-305 Liter | View on Amazon |
| LIQUI MOLY Fits: all 2019 Frontier engines | 20448 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Top Tec 4600 5W-305 Liter | View on Amazon |
| LIQUI MOLY Fits: all 2019 Frontier engines | 22261 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Special Tec B FE 0W-305 Liter | View on Amazon |
| LIQUI MOLY Fits: all 2019 Frontier engines | 2011 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Top Tec 4200 5W-305 Liter | View on Amazon |
| LIQUI MOLY Fits: all 2019 Frontier engines | 22158 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Top Tec 4210 0W-305 Liter | View on Amazon |
| LIQUI MOLY Fits: all 2019 Frontier engines | 22269 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Special Tec B FE 0W-3020 Liter | View on Amazon |
| LIQUI MOLY Fits: all 2019 Frontier engines | 20345 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Top Tec 4600 5W-3020 Liter | View on Amazon |
| LIQUI MOLY Fits: all 2019 Frontier engines | 20125 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Top Tec 4200 5W-3020 Liter | View on Amazon |
| LUCAS OIL Fits: all 2019 Frontier engines | 10049 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | FULL SYNTHETIC MOTOR OIL SAE 5W-301 qt | View on Amazon |
| LUCAS OIL Fits: all 2019 Frontier engines | 10051 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | FULL SYNTHETIC EUROPEAN MOTOR OIL SAE 5W-301 qt | View on Amazon |
| LUCAS OIL Fits: all 2019 Frontier engines | 18005 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Full Synthetic Motor Oil SAE 5W-306 Gallon | View on Amazon |
| LUCAS OIL Fits: all 2019 Frontier engines | 18020 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Full Synthetic European Motor Oil SAE 5W-306 Gallon | View on Amazon |
| MOBIL Fits: all 2019 Frontier engines | 112627 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Extended Performance 5W-30Mobil 1 Extended Performance | View on Amazon |
| MOBIL Fits: all 2019 Frontier engines | 124595 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Truck & SUV 5W-30Mobil 1 Truck & SUV | View on Amazon |
| PENTOSIN Fits: all 2019 Frontier engines | 8044214 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | 5W-30-Pentospeed-DEXOS1 GEN31 Liter | View on Amazon |
| PENTOSIN Fits: all 2019 Frontier engines | 8044216 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | 5W-30-Pentospeed-DEXOS1 GEN35 Liters | View on Amazon |
| VALVOLINE Fits: all 2019 Frontier engines | VV955 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Advanced Protection Full Synthetic SAE 5W-301 Quart | View on Amazon |
| VALVOLINE Fits: all 2019 Frontier engines | 891678 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Extended Protection Full Synthetic SAE 5W-301 Quart | View on Amazon |
| VALVOLINE Fits: all 2019 Frontier engines | 904564 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Restore & Protect Full Synthetic SAE 5W-301 Quart | View on Amazon |
| VALVOLINE Fits: all 2019 Frontier engines | 891670 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Extended Protection Full Synthetic SAE 5W-30Easy Pour 5 Quart | View on Amazon |
| VALVOLINE Fits: all 2019 Frontier engines | 904566 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Restore & Protect Full Synthetic SAE 5W-305 Quart | View on Amazon |
| VALVOLINE Fits: all 2019 Frontier engines | 881167 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | European Vehicle Full Synthetic XL-III SAE 5W-30Easy Pour 5 Quart | View on Amazon |
| VALVOLINE Fits: all 2019 Frontier engines | 881164 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Advanced Protection Full Synthetic SAE 5W-30Easy Pour 5 Quart | View on Amazon |
High Mileage (>75,000 Miles)
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| VALVOLINE Popular Fits: all 2019 Frontier engines | VV1556 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Max Life High Mileage Synthetic Blend SAE 5W-301 Quart | View on Amazon |
| MOBIL Fits: all 2019 Frontier engines | 125201 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Full Synthetic High Mileage 5W-301 Quart | View on Amazon |
| MOBIL Fits: all 2019 Frontier engines | 123842 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Extended Performance High Mileage 5W-30Synthetic | View on Amazon |
| MOBIL Fits: all 2019 Frontier engines | 103767 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | High Mileage 5W-30Mobil 1 High Mileage | View on Amazon |
| VALVOLINE Fits: all 2019 Frontier engines | VV179 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Full Synthetic High Mileage with Max Life Technology SAE 5W-301 Quart | View on Amazon |
| VALVOLINE Fits: all 2019 Frontier engines | 881163 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Max Life High Mileage Synthetic Blend SAE 5W-30Easy Pour 5 Quart | View on Amazon |
| VALVOLINE Fits: all 2019 Frontier engines | 881169 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Full Synthetic High Mileage with Max Life Technology SAE 5W-30Easy Pour 5 Quart | View on Amazon |
Synthetic Blend
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ACDELCO Popular Fits: all 2019 Frontier engines | 109290 | 🇺🇸 US | Synthetic BlendAPI SP Specifications | View on Amazon |
| MOBIL Popular Fits: all 2019 Frontier engines | 124407 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Super 5W-30Mobil Super | View on Amazon |
| VALVOLINE Fits: all 2019 Frontier engines | 797975 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Daily Protection SAE 5W-30 Synthetic Blend1 Quart | View on Amazon |
| VALVOLINE Fits: all 2019 Frontier engines | 881159 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Daily Protection SAE 5W-30 Synthetic BlendEasy Pour 5 Quart | View on Amazon |
This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable.
52 Oil parts are listed for the 2019 Nissan Frontier, from LIQUI MOLY, VALVOLINE, MOBIL and 4 other brands. LIQUI MOLY 20228 carries the "Popular" badge. Grades run from Conventional through Synthetic Blend; Full Synthetic is the most populated section, led by LIQUI MOLY, VALVOLINE, IDEMITSU and 3 other brands.
Oil Cooler
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Fits: 4.0L V6 | 918464 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| NISSENS Fits: 4.0L V6 | 91435 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| STANDARD MOTOR PRODUCTS Fits: 4.0L V6 | OCK37 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the heat exchangers that cool engine oil. Typical signs include oil at the cooler fittings, or coolant that looks like a milkshake. Pressure-test both circuits after a cooler swap — a leak here mixes oil and coolant.
3 Oil Cooler parts are listed for the 2019 Nissan Frontier, from DORMAN, NISSENS and STANDARD MOTOR PRODUCTS.
Listed part numbers: DORMAN 918464, NISSENS 91435 and STANDARD MOTOR PRODUCTS OCK37.
Oil Cooler Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| BECK/ARNLEY Fits: 2.5L L4 | 0396688 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| BECK/ARNLEY Fits: 4.0L V6 | 0396616 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| FEL-PRO Fits: all 2019 Frontier engines | 72493 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | 59.5 (mm) Inside Diameter | View on Amazon |
| FEL-PRO Fits: 4.0L V6 | 73233 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | 66 (mm) Inside Diameter | View on Amazon |
| MAHLE / CLEVITE Fits: 2.5L L4 | B32450 | 🇺🇸 US 🇨🇦 CA | Engine Oil Cooler SealMolded Rubber | View on Amazon |
This table covers the seals at the Oil Cooler. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
5 Oil Cooler Seal parts for the 2019 Nissan Frontier come from 3 brands — BECK/ARNLEY, FEL-PRO and MAHLE / CLEVITE. 1 part fits every engine; the other 4 are engine-specific.
This group includes BECK/ARNLEY 0396688, BECK/ARNLEY 0396616 and FEL-PRO 72493 and the remaining parts above.
Oil Drain Plug
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Popular Fits: all 2019 Frontier engines | 090038 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | StandardM12-1.25 | View on Amazon |
| DORMAN Popular Fits: all 2019 Frontier engines | 090049 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Pilot PointM12-1.25 | View on Amazon |
| AGS Fits: all 2019 Frontier engines | ODP00011 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | M12x1.25 | View on Amazon |
| BECK/ARNLEY Fits: all 2019 Frontier engines | 0160116 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Includes Gasket | View on Amazon |
| ENGINETECH Fits: all 2019 Frontier engines | DP7738X | 🇺🇸 US | Gas | View on Amazon |
| REIN Fits: all 2019 Frontier engines | HWU0112 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the drain plugs in the oil pan.
6 Oil Drain Plug parts are listed for the 2019 Nissan Frontier, from DORMAN, AGS, BECK/ARNLEY and 2 other brands. DORMAN 090038 carries the "Popular" badge. All of them fit every engine offered in the 2019 Frontier.
Listed part numbers: DORMAN 090038, DORMAN 090049 and AGS ODP00011, plus the other parts above.
Oil Drain Plug Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Popular Fits: all 2019 Frontier engines | 097134 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | SizeM10 | View on Amazon |
| AJUSA Fits: all 2019 Frontier engines | 01140600 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | with Original Equipment (OE) # 11026-BX000 | View on Amazon |
| APEX Fits: all 2019 Frontier engines | ADP1904 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| DORMAN Fits: all 2019 Frontier engines | 997134CD | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| FEL-PRO Fits: all 2019 Frontier engines | 73347 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | 0.500 (in) Inside Diameter x 0.750 (in) Outside DiameterCopper | View on Amazon |
This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
5 Oil Drain Plug Gasket parts for the 2019 Nissan Frontier come from 4 brands — DORMAN, AJUSA, APEX and 1 other brand. The "Popular" part is DORMAN 097134. Every part fits both the 2.5L L4 and the 4.0L V6.
Part numbers include DORMAN 097134, AJUSA 01140600 and APEX ADP1904, among others listed above.
Oil Filler Cap
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOTORAD Popular Fits: all 2019 Frontier engines | MO107 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| CALORSTAT Fits: all 2019 Frontier engines | OC2316 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| DORMAN Fits: all 2019 Frontier engines | 90200 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| GATES Fits: all 2019 Frontier engines | 31115 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| SKP Fits: all 2019 Frontier engines | SKMO107 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the caps on the oil filler neck.
5 Oil Filler Cap parts are listed for the 2019 Nissan Frontier, from MOTORAD, CALORSTAT, DORMAN and 2 other brands. MOTORAD MO107 carries the "Popular" badge. All of them fit every engine offered in the 2019 Frontier.
This group includes MOTORAD MO107, CALORSTAT OC2316 and DORMAN 90200 and the remaining parts above.
Oil Filter
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| CHAMP / LUBER-FINER Popular Fits: 2.5L L4 | PH2876 | 🇺🇸 US 🇨🇦 CA | Inside Diameter: M20 X 1.5 Thread. | View on Amazon |
| BOSCH Fits: 2.5L L4 | 72230WS | 🇺🇸 US 🇨🇦 CA | Workshop Oil Filter | View on Amazon |
| BOSCH Fits: 4.0L V6 | 72226WS | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Workshop Oil Filter | View on Amazon |
| FRAM Fits: 2.5L L4 | FE6607 | 🇺🇸 US 🇨🇦 CA | Spin-OnTough Guard or Synthetic Endurance | View on Amazon |
| FRAM Fits: 4.0L V6 | FE7317 | 🇺🇸 US 🇨🇦 CA | Spin-OnTough Guard or Synthetic Endurance | View on Amazon |
| FVP Fits: 2.5L L4 | R1358 | 🇺🇸 US 🇨🇦 CA | OE# 15208-65F0E | View on Amazon |
| FVP Fits: 4.0L V6 | R7356 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | OE# 152089E01A | View on Amazon |
| PRO-TEC Fits: 2.5L L4 | PXL51358 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| PRO-TEC Fits: 4.0L V6 | PXL57356 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| VARIOUS MFR Fits: all 2019 Frontier engines | PG4612 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| VARIOUS MFR Fits: 2.5L L4 | PO4612NS1 | 🇺🇸 US 🇨🇦 CA | OE Style | View on Amazon |
| VARIOUS MFR Fits: 4.0L V6 | PO4610NS2 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | OE Style | View on Amazon |
High Performance / Heavy Duty
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOBIL Popular Fits: all 2019 Frontier engines | M1108A | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Extended Performance | View on Amazon |
| WIX Popular Fits: 4.0L V6 | 57356XP | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | XP Extreme DutyBest for Synthetic Motor Oils | View on Amazon |
| WIX Fits: 2.5L L4 | 51358XP | 🇺🇸 US 🇨🇦 CA | XP Extreme DutyBest for Synthetic Motor Oils | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| BOSCH Popular Fits: 2.5L L4 | 3300 | 🇺🇸 US 🇨🇦 CA | Premium Oil Filter | View on Amazon |
| BOSCH Popular Fits: 4.0L V6 | 3323 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Premium Oil Filter | View on Amazon |
| WIX Popular Fits: 2.5L L4 | 51358 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| WIX Popular Fits: 4.0L V6 | 57356 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| ACDELCO Fits: 2.5L L4 | PF1237B | 🇺🇸 US 🇨🇦 CA | Silver | View on Amazon |
| ACKOJA Fits: 2.5L L4 | A370500 | 🇺🇸 US 🇨🇦 CA | with OE No. 1520865F0C | View on Amazon |
| BECK/ARNLEY Fits: 2.5L L4 | 0418136 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| BECK/ARNLEY Fits: 4.0L V6 | 0418135 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| HASTINGS / BALDWIN Fits: 2.5L L4 | LF113 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| HASTINGS / BALDWIN Fits: 4.0L V6 | LF240 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| HENGST Fits: 2.5L L4 | H97W06 | 🇺🇸 US 🇨🇦 CA | Spin-On | View on Amazon |
| HENGST Fits: 4.0L V6 | H97W01 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Filter Media Material: Enhanced CelluloseSpin-On | View on Amazon |
| MAHLE / CLEVITE Fits: 4.0L V6 | OC707 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Spin-On86.00mm Height | View on Amazon |
| MANN Fits: 2.5L L4 | MW64 | 🇺🇸 US 🇨🇦 CA | Height: 2.6 InStyle: Spin-On Lube Filter | View on Amazon |
| MANN Fits: 4.0L V6 | W6103 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Anti-Drain Back Valve: NoHeight: 3.54 In | View on Amazon |
| MOTORCRAFT Fits: all 2019 Frontier engines | FL816 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| VARIOUS MFR Fits: all 2019 Frontier engines | PG4612EX | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Extended Life | View on Amazon |
This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive.
32 Oil Filter parts are listed for the 2019 Nissan Frontier, from BOSCH, VARIOUS MFR, WIX and 13 other brands. CHAMP / LUBER-FINER PH2876 carries the "Popular" badge. Economy, High Performance / Heavy Duty and Standard Replacement are all represented, and Standard Replacement alone accounts for 17 parts.
Oil Pan
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| SKP Popular Fits: 4.0L V6 | SK264529 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Lower | View on Amazon |
| AUTOTECNICA Fits: 4.0L V6 | NI1415223 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Lower | View on Amazon |
| DORMAN Fits: 4.0L V6 | 264529 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Lower | View on Amazon |
| SPECTRA PREMIUM Fits: 4.0L V6 | NSP29A | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | LowerGasket and/or Sealant Not Included | View on Amazon |
| ULTRA-POWER Fits: 4.0L V6 | 264529 | 🇺🇸 US 🇨🇦 CA | Lower | View on Amazon |
This table covers the oil pans that hold the engine's oil sump.
5 Oil Pan parts for the 2019 Nissan Frontier come from 5 brands — SKP, AUTOTECNICA, DORMAN and 2 other brands. The "Popular" part is SKP SK264529.
Listed part numbers: SKP SK264529, AUTOTECNICA NI1415223 and DORMAN 264529, plus the other parts above.
Oil Pan Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| APEX Fits: 4.0L V6 | AOP555 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Lower | View on Amazon |
| FEL-PRO Fits: 4.0L V6 | OS30787 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Lower | View on Amazon |
| VICTOR REINZ Fits: all 2019 Frontier engines | 703141410 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | RTV Silicone | View on Amazon |
| VICTOR REINZ Fits: 4.0L V6 | 711584400 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | LowerCork Rubber | View on Amazon |
This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
4 Oil Pan Gasket parts are listed for the 2019 Nissan Frontier, from VICTOR REINZ, APEX and FEL-PRO. 1 part fits every engine; the other 3 are engine-specific.
This group includes APEX AOP555, FEL-PRO OS30787 and VICTOR REINZ 703141410 and the remaining parts above.
Oil Pump
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Fits: 4.0L V6 | EPK111 | 🇺🇸 US | 'Pressure King' Value Line Pump | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MELLING Popular Fits: 4.0L V6 | M525 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| ENGINETECH Fits: 4.0L V6 | EP014 | 🇺🇸 US | Gas | View on Amazon |
| SEALED POWER Fits: 4.0L V6 | 22443683 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| TOPLINE Fits: 4.0L V6 | OPD45 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Kit | View on Amazon |
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| TOPLINE Fits: 2.5L L4 | TCD42F | 🇺🇸 US 🇨🇦 CA | Kit | View on Amazon |
This table covers the Oil pumps. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit.
6 Oil Pump parts are listed for the 2019 Nissan Frontier, from ENGINETECH, TOPLINE, MELLING and 1 other brand. MELLING M525 carries the "Popular" badge.
Economy: 1 part, from ENGINETECH. A representative part number is ENGINETECH EPK111.
The Standard Replacement section: 4 options from MELLING, ENGINETECH, SEALED POWER and 1 other brand. MELLING M525 is listed in this group.
1 ungrouped part is not assigned to a grade, with the same engine-level match.
This group includes MELLING M525, ENGINETECH EPK111 and ENGINETECH EP014 and the remaining parts above.
Oil Pump Sprocket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| CLOYES Fits: 2.5L L4 | S945 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| FVP Fits: 2.5L L4 | S945 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the Oil Pump sprockets.
2 Oil Pump Sprocket parts for the 2019 Nissan Frontier come from 2 brands — CLOYES and FVP.
Part numbers include CLOYES S945, among others listed above.
Oil Temperature Sender
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS Fits: all 2019 Frontier engines | TX187 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the Oil Temperature senders.
This group shows a single part: STANDARD MOTOR PRODUCTS TX187.
Piston
Premium
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Popular Fits: 4.0L V6 | P4015 | 🇺🇸 US | Coated SkirtRecessed Head | View on Amazon |
| ENGINETECH Fits: 4.0L V6 | K40156P | 🇺🇸 US | Includes Premium RingsRecessed Head | View on Amazon |
| MAHLE / CLEVITE Fits: 4.0L V6 | 2243934WR | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | with RingsSkirt Coated | View on Amazon |
| MAHLE / CLEVITE Fits: 4.0L V6 | 2243934 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Skirt Coated | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| TOPLINE Fits: 4.0L V6 | PAD45 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | with Rings | View on Amazon |
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| TOPLINE Fits: 2.5L L4 | PAD42F | 🇺🇸 US 🇨🇦 CA | with Rings | View on Amazon |
This table covers the pistons that travel in each cylinder. Typical signs include knock, blow-by, or a cylinder that will not hold compression. Piston work is a short-block job. Match bore, pin and ring pack in the notes — not the photo.
6 Piston parts for the 2019 Nissan Frontier come from 3 brands — ENGINETECH, MAHLE / CLEVITE and TOPLINE. The "Popular" part is ENGINETECH P4015.
In the Premium grade, ENGINETECH and MAHLE / CLEVITE supply 4 parts: a step above OE specification in materials, tolerances or warranty terms. A representative part number is ENGINETECH P4015.
Standard Replacement: 1 part, from TOPLINE. A representative part number is TOPLINE PAD45.
1 further part sits outside the graded sections, with the same engine-level match.
Part numbers include ENGINETECH P4015, ENGINETECH K40156P and MAHLE / CLEVITE 2243934WR, among others listed above.
Piston Pin Bushing
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| TOPLINE Fits: 2.5L L4 | PBD42 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| TOPLINE Fits: 4.0L V6 | PBD34 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the Piston Pin bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles.
TOPLINE supplies both parts for the 2019 Nissan Frontier.
Part numbers include TOPLINE PBD42 and TOPLINE PBD34.
Piston Ring
Premium
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Popular Fits: 4.0L V6 | S95516 | 🇺🇸 US | Steel Top PremiumSet | View on Amazon |
| SEALED POWER Fits: 4.0L V6 | E1010KC | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | PremiumRing Groove Widths: 1.2mm, 1.2mm, 2.5mm | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| HASTINGS MANUFACTURING Fits: 4.0L V6 | 2C5293S | 🇺🇸 US | 1 Cylinder SetChrome Top Ring | View on Amazon |
| HASTINGS MANUFACTURING Fits: 4.0L V6 | 2C5293 | 🇺🇸 US | Full SetTop Ring Surface Treatment: Chrome | View on Amazon |
| TOPLINE Fits: 4.0L V6 | RSD41 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Set | View on Amazon |
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ITM ENGINE COMPONENTS Fits: 2.5L L4 | 0216905 | 🇺🇸 US 🇨🇦 CA | Set1.2 X 1.2 X 2mm | View on Amazon |
| TOPLINE Fits: 2.5L L4 | RSD42 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
This table covers the rings that seal each piston to the cylinder wall.
7 Piston Ring parts for the 2019 Nissan Frontier come from 5 brands — HASTINGS MANUFACTURING, TOPLINE, ENGINETECH and 2 other brands. The "Popular" part is ENGINETECH S95516.
Premium: 2 parts, from ENGINETECH and SEALED POWER. A representative part number is ENGINETECH S95516.
Standard Replacement: 3 parts, from HASTINGS MANUFACTURING and TOPLINE. A representative part number is HASTINGS MANUFACTURING 2C5293S.
2 further parts sit outside the graded sections, with the same engine-level match.
This group includes ENGINETECH S95516, SEALED POWER E1010KC and HASTINGS MANUFACTURING 2C5293S and the remaining parts above.
Thrust Washer
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Fits: 4.0L V6 | TW1212 | 🇺🇸 US | Gas (Size: Standard) | View on Amazon |
| KING ENGINE BEARINGS Fits: 2.5L L4 | TW1008AM | 🇺🇸 US 🇨🇦 CA | Bimetal (Aluminum Base) | View on Amazon |
| KING ENGINE BEARINGS Fits: 4.0L V6 | TW1020AM | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Bimetal (Aluminum Base) | View on Amazon |
This table covers the Thrust washers.
3 Thrust Washer parts are listed for the 2019 Nissan Frontier, from KING ENGINE BEARINGS and ENGINETECH.
Listed part numbers: ENGINETECH TW1212, KING ENGINE BEARINGS TW1008AM and KING ENGINE BEARINGS TW1020AM.
Timing Cam Sprocket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| CLOYES Popular Fits: 4.0L V6 | S948T | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Exhaust | View on Amazon |
| CLOYES Fits: 2.5L L4 | S922T | 🇺🇸 US 🇨🇦 CA | Exhaust | View on Amazon |
| FVP Fits: 2.5L L4 | S922T | 🇺🇸 US 🇨🇦 CA | Exhaust | View on Amazon |
| FVP Fits: 4.0L V6 | S948T | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Exhaust | View on Amazon |
| INA Fits: 4.0L V6 | ZSS1232 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| MELLING Fits: 2.5L L4 | S922 | 🇺🇸 US 🇨🇦 CA | Exhaust | View on Amazon |
| MELLING Fits: 4.0L V6 | S1232 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Exhaust | View on Amazon |
| S.A. GEAR Fits: 2.5L L4 | S922 | 🇺🇸 US 🇨🇦 CA | Left | View on Amazon |
| S.A. GEAR Fits: 4.0L V6 | S1232 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Secondary | View on Amazon |
This table covers the Timing Cam sprockets.
9 Timing Cam Sprocket parts are listed for the 2019 Nissan Frontier, from CLOYES, FVP, MELLING and 2 other brands. CLOYES S948T carries the "Popular" badge.
Listed part numbers: CLOYES S948T and CLOYES S922T, plus the other parts above.
Timing Chain
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MELLING Popular Fits: 4.0L V6 | 721 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | UpperSecondary Timing Chain | View on Amazon |
| S.A. GEAR Popular Fits: 4.0L V6 | RC1043 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Secondary | View on Amazon |
| CLOYES Fits: 2.5L L4 | 94212 | 🇺🇸 US 🇨🇦 CA | Center | View on Amazon |
| CLOYES Fits: 4.0L V6 | C721F | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | UpperGas | View on Amazon |
| CLOYES Fits: 4.0L V6 | C719F | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | CenterGAS | View on Amazon |
| FVP Fits: 2.5L L4 | 94212 | 🇺🇸 US 🇨🇦 CA | Center | View on Amazon |
| MELLING Fits: 2.5L L4 | 1051 | 🇺🇸 US 🇨🇦 CA | Camshaft Chain | View on Amazon |
| MELLING Fits: 4.0L V6 | 719 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Primary Silent Timing Chain | View on Amazon |
| S.A. GEAR Fits: 2.5L L4 | C1221 | 🇺🇸 US 🇨🇦 CA | PRIMARY | View on Amazon |
| S.A. GEAR Fits: 4.0L V6 | C1015 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | PRIMARY | View on Amazon |
This table covers the timing chains that keep the cams in time with the crank.
10 Timing Chain parts for the 2019 Nissan Frontier come from 4 brands — MELLING, S.A. GEAR, CLOYES and 1 other brand. The "Popular" part is MELLING 721.
Timing Chain & Component Kit
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| S.A. GEAR Popular Fits: 4.0L V6 | 76219 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Includes 2 Camshaft Sprockets, 3 Chains, Crank Sprocket, 2 Guides, Tensioner Arm, 3 Tensioners | View on Amazon |
| GATES Fits: 4.0L V6 | CHK108 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Includes 3 Timing Chains, 3 Tensioners, 3 Guides, 3 Sprockets | View on Amazon |
| GATES Fits: 4.0L V6 | CHK108A | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Includes 3 Timing Chains, 3 Tensioners, 3 Guides, 3 Sprockets, Water PumpExcludes VVT Sprockets | View on Amazon |
| GATES Fits: 4.0L V6 | CHK108M | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Includes 3 Timing Chains, 3 Tensioners, 3 Guides, 5 VVT Sprockets, Water Pump, 2 Solenoids | View on Amazon |
| ITM ENGINE COMPONENTS Fits: 4.0L V6 | 05390640 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Includes: 1 Primary Chain (210 Links), 2 Secondary Chains (66L), 1 Crank Gear, 2 Cam Gears, 3 Tensioners, 3 Guides | View on Amazon |
| S.A. GEAR Fits: 2.5L L4 | 76607T | 🇺🇸 US 🇨🇦 CA | Includes Camshaft Sprocket, Chain, Crank Sprocket, 2 Guides, Tensioner Arm, Tensioner | View on Amazon |
| S.A. GEAR Fits: 2.5L L4 | 76607S | 🇺🇸 US 🇨🇦 CA | Does Not Include SprocketsIncludes 2 Chains, 2 Guides, Tensioner Arm, 2 Tensioners | View on Amazon |
| S.A. GEAR Fits: 2.5L L4 | 76607 | 🇺🇸 US 🇨🇦 CA | Includes Balance Shaft Sprocket, Camshaft Sprocket, 2 Chains, Crank Sprocket, 2 Guides, Tensioner Arm, 2 Tensioners | View on Amazon |
| S.A. GEAR Fits: 4.0L V6 | 76219S | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Does Not Include SprocketsIncludes 3 Chains, 2 Guides, Tensioner Arm, 3 Tensioners | View on Amazon |
| S.A. GEAR Fits: 4.0L V6 | 76219W | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Includes 2 Camshaft Sprockets, 3 Chains, Crank Sprocket, 2 Guides, Tensioner Arm, 3 Tensioners, Water Pump | View on Amazon |
| S.A. GEAR Fits: 4.0L V6 | 76219V | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Includes 2 CAM Sprockets, 3 Chains, Crank Sprocket, 2 Guides, Tens. Arm, 3 Tensioners, 2 VVT Cams, 2 VVT Solenoids | View on Amazon |
| SKP Fits: 4.0L V6 | SK90719S | 🇺🇸 US | without Water Pump | View on Amazon |
| SKP Fits: 4.0L V6 | SK90719SWP | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Gaswith Water Pump | View on Amazon |
| ULTRA-POWER Fits: 4.0L V6 | 90719S | 🇺🇸 US 🇨🇦 CA | without Variable Valve Timing (VVT) SprocketGas Engine | View on Amazon |
| ULTRA-POWER Fits: 4.0L V6 | 90719SWP | 🇺🇸 US 🇨🇦 CA | With Water PumpGAS Engine | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| CLOYES Popular Fits: 2.5L L4 | 94212SG | 🇺🇸 US 🇨🇦 CA | Includes: Timing Chain Tensioner, Chain Guide (3), Balance Shaft Tensioner, Balance Shaft Chain, Crankshaft Sprocket, Camshaft Sprocket, Oil Pump Sprocket | View on Amazon |
| CLOYES Popular Fits: 4.0L V6 | 90719S | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Includes: Timing Chain (3), Timing Chain Tensioner (3), Timing Chain Guide (2), Timing Chain Tensioner Guide, Crankshaft Sprocket, Camshaft Sprocket (2) | View on Amazon |
| CLOYES Popular Fits: 4.0L V6 | 90719SWP | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | With Water PumpIncludes: Timing Chain (3), Timing Chain Tensioner (3), Timing Chain Guide (2), Timing Chain Tensioner Guide, Crankshaft Sprocket, Camshaft Sprocket (2), Water Pump | View on Amazon |
| CLOYES Popular Fits: 4.0L V6 | 90719SK3 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | With Water PumpIncludes: Timing Chain (3), Timing Chain Tensioner (3), Timing Chain Guide (2), Timing Chain Tensioner Guide, Crankshaft Sprocket, Variable Valve Timing Sprocket (2), Camshaft Sprocket (2), Variable Valve Timing Solenoid (2), Water Pump | View on Amazon |
| INA Popular Fits: 2.5L L4 | ZC76322T | 🇺🇸 US 🇨🇦 CA | Includes 1 Chain, 1 Crank Sprocket, 1 Tensioner Arm, 1 Guide, 1 TensionerDoes Not Include Cam Sprocket | View on Amazon |
| MELLING Popular Fits: 4.0L V6 | 30719SHWP | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Includes Water Pump | View on Amazon |
| CLOYES Fits: 4.0L V6 | 90719SVVT | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Includes: Timing Chain (3), Timing Chain Tensioner (3), Timing Chain Guide (2), Timing Chain Tensioner Guide, Crankshaft Sprocket, Variable Valve Timing (VVT) Sprocket (2), Camshaft Sprocket (2), Variable Valve Timing (VVT) Solenoid (2) | View on Amazon |
| ENGINETECH Fits: 4.0L V6 | TS0719 | 🇺🇸 US | Gaswithout Variable Valve Timing Intake Sprockets | View on Amazon |
| INA Fits: 4.0L V6 | ZC76219S | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Includes 3 Chains, 2 Guides, 1 Tensioner Arm, 3 TensionersDoes Not Include Cam Sprocket | View on Amazon |
| INA Fits: 4.0L V6 | ZC90719S | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Includes 2 CAM Sprocket, 3 Chains, 1 Crank Sprocket, 2 Guides, 1 Tens. Arm, 3 Tensioners | View on Amazon |
| MELLING Fits: 2.5L L4 | 31051SGX | 🇺🇸 US 🇨🇦 CA | Does Not Include Sprockets | View on Amazon |
| MELLING Fits: 2.5L L4 | 31051SG | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| MELLING Fits: 4.0L V6 | 30719S | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers kits that group a timing chain with the related tensioners and guides.
28 Timing Chain & Component Kit parts are listed for the 2019 Nissan Frontier, from S.A. GEAR, CLOYES, MELLING and 6 other brands. S.A. GEAR 76219 carries the "Popular" badge. They are grouped as Economy and Standard Replacement, with Economy the largest group at 15 parts from S.A. GEAR, GATES, SKP and 2 other brands.
Timing Chain Guide / Damper
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MELLING Popular Fits: 2.5L L4 | BG5502 | 🇺🇸 US 🇨🇦 CA | LowerCamshaft Chain Guide | View on Amazon |
| MELLING Popular Fits: 4.0L V6 | BD6005 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Tensioner ArmRight | View on Amazon |
| S.A. GEAR Popular Fits: 2.5L L4 | 71016 | 🇺🇸 US 🇨🇦 CA | Lower | View on Amazon |
| S.A. GEAR Popular Fits: 2.5L L4 | 71014 | 🇺🇸 US 🇨🇦 CA | Tensioner ArmArm | View on Amazon |
| S.A. GEAR Popular Fits: 4.0L V6 | 71046 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Upper | View on Amazon |
| S.A. GEAR Popular Fits: 4.0L V6 | 71011 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Tensioner ArmArm | View on Amazon |
| CLOYES Fits: 2.5L L4 | 95503 | 🇺🇸 US 🇨🇦 CA | Guide | View on Amazon |
| CLOYES Fits: 2.5L L4 | 95507 | 🇺🇸 US 🇨🇦 CA | Tensioner ArmRight | View on Amazon |
| CLOYES Fits: 2.5L L4 | 95502 | 🇺🇸 US 🇨🇦 CA | Guide | View on Amazon |
| CLOYES Fits: 4.0L V6 | 95626 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Guide | View on Amazon |
| CLOYES Fits: 4.0L V6 | 95625 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Guide | View on Amazon |
| CLOYES Fits: 4.0L V6 | 95592 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Tensioner ArmRight | View on Amazon |
| INA Fits: 4.0L V6 | ZG95626 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Lower | View on Amazon |
| INA Fits: 4.0L V6 | ZG95625 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Upper | View on Amazon |
| INA Fits: 4.0L V6 | ZG95592 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Tensioner Arm | View on Amazon |
| MELLING Fits: 2.5L L4 | BG5503 | 🇺🇸 US 🇨🇦 CA | UpperCamshaft Chain Guide | View on Amazon |
| MELLING Fits: 2.5L L4 | BT5507 | 🇺🇸 US 🇨🇦 CA | RightCamshaft Chain Tensioner Arm | View on Amazon |
| MELLING Fits: 4.0L V6 | BG6004 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Lower | View on Amazon |
| MELLING Fits: 4.0L V6 | BG6003 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Upper | View on Amazon |
| PREFERRED COMPONENTS INC Fits: 2.5L L4 | R76134 | 🇺🇸 US 🇨🇦 CA | Upper | View on Amazon |
| PREFERRED COMPONENTS INC Fits: 2.5L L4 | R76133 | 🇺🇸 US 🇨🇦 CA | Tensioner ArmRight | View on Amazon |
| PREFERRED COMPONENTS INC Fits: 2.5L L4 | R76132 | 🇺🇸 US 🇨🇦 CA | LowerCamshaft Chain Guide | View on Amazon |
| S.A. GEAR Fits: 2.5L L4 | 71015 | 🇺🇸 US 🇨🇦 CA | Upper | View on Amazon |
| S.A. GEAR Fits: 4.0L V6 | 71045 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Lower | View on Amazon |
This table covers the guides and dampers that keep the timing chain on its path.
24 Timing Chain Guide / Damper parts for the 2019 Nissan Frontier come from 5 brands — MELLING, S.A. GEAR, CLOYES and 2 other brands. The "Popular" part is MELLING BG5502.
Timing Chain Tensioner
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| S.A. GEAR Popular Fits: 2.5L L4 | 91011 | 🇺🇸 US 🇨🇦 CA | PRIMARY | View on Amazon |
| S.A. GEAR Popular Fits: 4.0L V6 | 91071 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | PRIMARY | View on Amazon |
| S.A. GEAR Popular Fits: 4.0L V6 | 91022 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | RightSecondary | View on Amazon |
| S.A. GEAR Popular Fits: 4.0L V6 | 91023 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | LeftSecondary | View on Amazon |
| CLOYES Fits: 2.5L L4 | 95501 | 🇺🇸 US 🇨🇦 CA | Right Upper | View on Amazon |
| CLOYES Fits: 4.0L V6 | 95624 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Right | View on Amazon |
| CLOYES Fits: 4.0L V6 | 95588 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Left UpperGAS | View on Amazon |
| CLOYES Fits: 4.0L V6 | 95589 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Right UpperGAS | View on Amazon |
| FVP Fits: 2.5L L4 | 95501 | 🇺🇸 US 🇨🇦 CA | Right Upper | View on Amazon |
| INA Fits: 4.0L V6 | ZT91022 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | RightSecondary | View on Amazon |
| MELLING Fits: 2.5L L4 | BT5501 | 🇺🇸 US 🇨🇦 CA | UpperCamshaft Chain Tensioner | View on Amazon |
| MELLING Fits: 4.0L V6 | BT6000 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Primary Right | View on Amazon |
| MELLING Fits: 4.0L V6 | BT6001 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | RightSecondary | View on Amazon |
| MELLING Fits: 4.0L V6 | BT6002 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | LeftSecondary | View on Amazon |
| PREFERRED COMPONENTS INC Fits: 2.5L L4 | T66167 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| PREFERRED COMPONENTS INC Fits: 4.0L V6 | T66107 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | LowerPrimary | View on Amazon |
| PREFERRED COMPONENTS INC Fits: 4.0L V6 | T66224 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Left UpperSecondary | View on Amazon |
| PREFERRED COMPONENTS INC Fits: 4.0L V6 | T66223 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Right UpperSecondary | View on Amazon |
This table covers the tensioners that keep the timing chain taut. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage.
18 Timing Chain Tensioner parts are listed for the 2019 Nissan Frontier, from S.A. GEAR, CLOYES, MELLING and 3 other brands. S.A. GEAR 91011 carries the "Popular" badge.
Timing Cover Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| APEX Fits: 4.0L V6 | ATC5340 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the gaskets that seal the Timing Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
One part is listed for the 2019 Nissan Frontier — APEX ATC5340.
Timing Cover Repair Sleeve
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| SKF Fits: 4.0L V6 | 99189 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the wear sleeves used to restore a Timing Cover seal surface.
One part is listed for the 2019 Nissan Frontier — SKF 99189.
Timing Cover Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MAHLE / CLEVITE Fits: 2.5L L4 | 67783 | 🇺🇸 US 🇨🇦 CA | Rubber | View on Amazon |
| MAHLE / CLEVITE Fits: 4.0L V6 | 67689 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rubber | View on Amazon |
| SKF Fits: 2.5L L4 | 18132 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| SKF Fits: 4.0L V6 | 18857 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the seals at the Timing Cover. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
4 Timing Cover Seal parts are listed for the 2019 Nissan Frontier, from MAHLE / CLEVITE and SKF.
Part numbers include MAHLE / CLEVITE 67783, MAHLE / CLEVITE 67689 and SKF 18132, among others listed above.
Timing Crank Sprocket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MELLING Popular Fits: 4.0L V6 | S1221 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| CLOYES Fits: 2.5L L4 | S907 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| CLOYES Fits: 4.0L V6 | S947 | 🇺🇸 US | Gas | View on Amazon |
| FVP Fits: 2.5L L4 | S907 | 🇺🇸 US 🇨🇦 CA | Outer | View on Amazon |
| FVP Fits: 4.0L V6 | S947 | 🇺🇸 US | OuterGAS | View on Amazon |
| INA Fits: 4.0L V6 | ZSS1221 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| MELLING Fits: 2.5L L4 | S907 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| S.A. GEAR Fits: 2.5L L4 | S907 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| S.A. GEAR Fits: 4.0L V6 | S1221 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the crankshaft sprockets that drive the timing chain or belt.
9 Timing Crank Sprocket parts are listed for the 2019 Nissan Frontier, from MELLING, CLOYES, FVP and 2 other brands. MELLING S1221 carries the "Popular" badge.
This group includes MELLING S1221, CLOYES S907 and CLOYES S947 and the remaining parts above.
Valve Cover
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| APEX Popular Fits: 4.0L V6 | VCS555R | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Includes Gasket | View on Amazon |
| DORMAN Popular Fits: 4.0L V6 | 264746 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Right | View on Amazon |
| SKP Popular Fits: 4.0L V6 | SK510A02 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Right | View on Amazon |
| ACKOJA Fits: 4.0L V6 | A380688 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | with OE No. 13264EA200 | View on Amazon |
| ACKOJA Fits: 4.0L V6 | A380689 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | with OE No. 13264EA210 | View on Amazon |
| APEX Fits: 2.5L L4 | VCS559 | 🇺🇸 US 🇨🇦 CA | Includes Gasket | View on Amazon |
| APEX Fits: 4.0L V6 | VCS555L | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Includes Gasket | View on Amazon |
| AUTOTECNICA Fits: 4.0L V6 | NI1416752 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Leftwithout Gasket | View on Amazon |
| AUTOTECNICA Fits: 4.0L V6 | NI1416753 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rightwithout Gasket | View on Amazon |
| DORMAN Fits: 2.5L L4 | 263315 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| DORMAN Fits: 4.0L V6 | 264747 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Left | View on Amazon |
| ITM ENGINE COMPONENTS Fits: 4.0L V6 | 0963400 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | LeftLEFT SIDE | View on Amazon |
| ITM ENGINE COMPONENTS Fits: 4.0L V6 | 0963401 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | RightRIGHT SIDE | View on Amazon |
| SKP Fits: 4.0L V6 | SK264746AL | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rightaluminum | View on Amazon |
| SKP Fits: 4.0L V6 | SK264747AL | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | LeftAluminum | View on Amazon |
This table covers the Valve covers.
15 Valve Cover parts for the 2019 Nissan Frontier come from 6 brands — APEX, DORMAN, SKP and 3 other brands. The "Popular" part is APEX VCS555R.
Valve Cover Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Popular Fits: 2.5L L4 | VS50623R | 🇺🇸 US 🇨🇦 CA | Permadry | View on Amazon |
| MAHLE / CLEVITE Popular Fits: 2.5L L4 | VS50385S | 🇺🇸 US 🇨🇦 CA | Molded Rubber | View on Amazon |
| ULTRA-POWER Popular Fits: 4.0L V6 | VS50608R | 🇺🇸 US 🇨🇦 CA | SetMolded Rubber Gasket(s) Included | View on Amazon |
| VICTOR REINZ Popular Fits: 4.0L V6 | 151010701 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Set | View on Amazon |
| AJUSA Fits: 2.5L L4 | 11144400 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| APEX Fits: 2.5L L4 | AVC551 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| APEX Fits: 4.0L V6 | AVC550 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| BECK/ARNLEY Fits: 2.5L L4 | 0361607 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| BECK/ARNLEY Fits: 4.0L V6 | 0361963 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Left | View on Amazon |
| BECK/ARNLEY Fits: 4.0L V6 | 0361960 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Right | View on Amazon |
| ENGINETECH Fits: 4.0L V6 | VCNI35A | 🇺🇸 US | Set | View on Amazon |
| FEL-PRO Fits: 4.0L V6 | VS50608R | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Permadry Molded Rubber | View on Amazon |
| MAHLE / CLEVITE Fits: 4.0L V6 | VS50371SR | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Molded Rubber | View on Amazon |
| MAHLE / CLEVITE Fits: 4.0L V6 | VS50371SL | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Molded Rubber | View on Amazon |
| MAHLE / CLEVITE Fits: 4.0L V6 | VS50371 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | SetMolded Rubber | View on Amazon |
| VICTOR REINZ Fits: 2.5L L4 | 715337900 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
16 Valve Cover Gasket parts are listed for the 2019 Nissan Frontier, from MAHLE / CLEVITE, BECK/ARNLEY, FEL-PRO and 5 other brands. FEL-PRO VS50623R carries the "Popular" badge.
Valve Guide
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Popular Fits: 2.5L L4 | GD8216 | 🇺🇸 US | Iron | View on Amazon |
| ENGINETECH Fits: 2.5L L4 | GD8217 | 🇺🇸 US | Iron | View on Amazon |
| SBI Fits: all 2019 Frontier engines | 1408216 | 🇺🇸 US 🇨🇦 CA | Intake0.2365 I.D. | View on Amazon |
| SBI Fits: all 2019 Frontier engines | 1408217 | 🇺🇸 US 🇨🇦 CA | Exhaust0.2365 I.D. | View on Amazon |
| TOPLINE Fits: all 2019 Frontier engines | EVGD30 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Exhaust | View on Amazon |
| TOPLINE Fits: 4.0L V6 | VGD27 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Intake | View on Amazon |
This table covers the pressed-in bronze and cast-iron guides that align valve stems. Typical signs include oil smoke on startup, a guide that has gone oval, or a valve that no longer seats quietly. Guides are a machine-shop fit. Confirm stem diameter in the notes before ordering.
6 Valve Guide parts are listed for the 2019 Nissan Frontier, from ENGINETECH, SBI and TOPLINE. ENGINETECH GD8216 carries the "Popular" badge. 3 parts fit every engine; the other 3 are engine-specific.
This group includes ENGINETECH GD8216, ENGINETECH GD8217 and SBI 1408216 and the remaining parts above.
Valve Spring
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| SBI Fits: 2.5L L4 | 1601591 | 🇺🇸 US 🇨🇦 CA | Exhaust1.754 Length, 0.934 O.D., 0.698 I.D | View on Amazon |
This table covers the springs that close each intake and exhaust valve. Typical signs include a sagging corner, a broken coil, or a clunk from the spring pocket. Replace springs in axle pairs and inspect the seats.
This group shows a single part: SBI 1601591.
Valve Spring Retainer Keeper
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MELLING Fits: all 2019 Frontier engines | VL730 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| SBI Fits: all 2019 Frontier engines | 1211064 | 🇺🇸 US 🇨🇦 CA | Intake and Exhaust0.2490 Length | View on Amazon |
This table covers the keepers that lock each valve-spring retainer to the stem.
2 Valve Spring Retainer Keeper parts for the 2019 Nissan Frontier come from 2 brands — MELLING and SBI. Every part fits both the 2.5L L4 and the 4.0L V6.
Listed part numbers: MELLING VL730 and SBI 1211064.
Valve Stem Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Popular Fits: all 2019 Frontier engines | S505V | 🇺🇸 US | Viton | View on Amazon |
| FEL-PRO Popular Fits: 2.5L L4 | SS70157 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
| FEL-PRO Popular Fits: 4.0L V6 | SS72821 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Set | View on Amazon |
| APEX Fits: 2.5L L4 | AVS5007 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
| APEX Fits: 4.0L V6 | AVS5029 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Set | View on Amazon |
| MAHLE / CLEVITE Fits: 2.5L L4 | SS45601 | 🇺🇸 US 🇨🇦 CA | FluoroelastomerContains 16 PCS | View on Amazon |
| MAHLE / CLEVITE Fits: 4.0L V6 | SS45601A | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | FluoroelastomerContains 12 PCS | View on Amazon |
| SBI Fits: all 2019 Frontier engines | 1221150 | 🇺🇸 US 🇨🇦 CA | Intake and ExhaustViton Material | View on Amazon |
| TOPLINE Fits: all 2019 Frontier engines | VSSD27 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
9 Valve Stem Seal parts are listed for the 2019 Nissan Frontier, from FEL-PRO, APEX, MAHLE / CLEVITE and 3 other brands. ENGINETECH S505V carries the "Popular" badge. 3 parts fit every engine; the other 6 are engine-specific.
This group includes ENGINETECH S505V, FEL-PRO SS70157 and FEL-PRO SS72821 and the remaining parts above.
Variable Valve Timing (VVT) Solenoid / Actuator
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Popular Fits: 2.5L L4 | 917294 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| ROSTRA Popular Fits: 2.5L L4 | 790043 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| SKP Popular Fits: 4.0L V6 | SK917011 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rightwith Bolts | View on Amazon |
| SKP Popular Fits: 4.0L V6 | SK917012 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Left | View on Amazon |
| ULTRA-POWER Popular Fits: 4.0L V6 | 917012 | 🇺🇸 US 🇨🇦 CA | Left | View on Amazon |
| DORMAN Fits: 4.0L V6 | 917011 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rightwith Bolts | View on Amazon |
| DORMAN Fits: 4.0L V6 | 917012 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Left | View on Amazon |
| GATES Fits: 2.5L L4 | VVS196 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| GATES Fits: 4.0L V6 | VVS100 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Right | View on Amazon |
| GATES Fits: 4.0L V6 | VVS101 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Left | View on Amazon |
| HOLSTEIN Fits: 2.5L L4 | 2VTS0069 | 🇺🇸 US 🇨🇦 CA | Body code D40 | View on Amazon |
| HOLSTEIN Fits: 4.0L V6 | 2VTS0061 | 🇺🇸 US 🇨🇦 CA | RightBody code D40 | View on Amazon |
| HOLSTEIN Fits: 4.0L V6 | 2VTS0071 | 🇺🇸 US 🇨🇦 CA | LeftBody code D40 | View on Amazon |
| ROSTRA Fits: 4.0L V6 | 790016 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Right | View on Amazon |
| ROSTRA Fits: 4.0L V6 | 790029 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Left | View on Amazon |
| SKP Fits: 2.5L L4 | SK917294 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| WALKER PRODUCTS Fits: 2.5L L4 | 5901079 | 🇺🇸 US 🇨🇦 CA | Includes Oil Control Valve | View on Amazon |
| WALKER PRODUCTS Fits: 4.0L V6 | 5901001 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Includes Oil Control Valve | View on Amazon |
| WALKER PRODUCTS Fits: 4.0L V6 | 5901002 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Includes Oil Control Valve | View on Amazon |
| WELLS Fits: 2.5L L4 | 2T1043 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| WELLS Fits: 4.0L V6 | 2T1317 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Leftwith Housing | View on Amazon |
| WELLS Fits: 4.0L V6 | 2T1033 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | RightSolenoid Only | View on Amazon |
| WELLS Fits: 4.0L V6 | 2T1045 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | LeftSolenoid Only | View on Amazon |
| WELLS Fits: 4.0L V6 | 2T1318 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rightwith Housing | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AISIN Popular Fits: 2.5L L4 | OCV702 | 🇺🇸 US 🇨🇦 CA | Intake | View on Amazon |
| ASTEMO / HITACHI Popular Fits: 4.0L V6 | VTS0003 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Terminal Quantity: 2Terminal Type: Blade | View on Amazon |
| S.A. GEAR Popular Fits: 4.0L V6 | S1445S1 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | RightVVT Solenoid | View on Amazon |
| S.A. GEAR Popular Fits: 4.0L V6 | S1445S2 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | LeftVVT Solenoid | View on Amazon |
| ACKOJA Fits: 2.5L L4 | A380227 | 🇺🇸 US 🇨🇦 CA | with OE No. 23796AU00D | View on Amazon |
| AISIN Fits: 4.0L V6 | OCV701 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Intake (Left) | View on Amazon |
| AISIN Fits: 4.0L V6 | OCV700 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Intake (Right) | View on Amazon |
| BECK/ARNLEY Fits: 4.0L V6 | 0242133 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Includes Oil Control Valve | View on Amazon |
| BECK/ARNLEY Fits: 4.0L V6 | 0242134 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Includes Oil Control Valve | View on Amazon |
| CLOYES Fits: 2.5L L4 | VTS172 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| CLOYES Fits: 4.0L V6 | VTS111 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Variable Valve Timing (VVT) Solenoid | View on Amazon |
| CLOYES Fits: 4.0L V6 | VTS112 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Variable Valve Timing (VVT) Solenoid | View on Amazon |
| NTK Fits: 2.5L L4 | VV0037 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| NTK Fits: 4.0L V6 | VV0039 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | LeftSolenoid Only | View on Amazon |
| NTK Fits: 4.0L V6 | VV0030 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | RightSolenoid Only | View on Amazon |
| STANDARD MOTOR PRODUCTS Fits: 2.5L L4 | VVT151 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| STANDARD MOTOR PRODUCTS Fits: 4.0L V6 | VVT147 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Right | View on Amazon |
| STANDARD MOTOR PRODUCTS Fits: 4.0L V6 | VVT148 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Left | View on Amazon |
This table covers the oil-control solenoids that command the cam phasers. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same.
42 Variable Valve Timing (VVT) Solenoid / Actuator parts are listed for the 2019 Nissan Frontier, from WELLS, DORMAN, ROSTRA and 13 other brands. DORMAN 917294 carries the "Popular" badge. Grades run from Economy through Standard Replacement; Economy is the most populated section, led by WELLS, DORMAN, ROSTRA and 5 other brands.
Variable Valve Timing (VVT) Solenoid Gasket / Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Fits: 4.0L V6 | 918373 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the seals at the Variable Valve Timing (VVT) Solenoid Gasket. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
This group shows a single part: DORMAN 918373.
Variable Valve Timing (VVT) Sprocket
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AUTOTECNICA Fits: 4.0L V6 | NI1422640 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | IntakeGAS | View on Amazon |
| DORMAN Fits: 4.0L V6 | 916589 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Intake | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ASTEMO / HITACHI Popular Fits: 4.0L V6 | VTG0024 | 🇺🇸 US 🇨🇦 CA | Intake | View on Amazon |
| GATES Popular Fits: 4.0L V6 | VCP824 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Intake | View on Amazon |
| ACKOJA Fits: 4.0L V6 | A380548 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Intake | View on Amazon |
| CLOYES Fits: 4.0L V6 | VC111 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Intake | View on Amazon |
| S.A. GEAR Fits: 4.0L V6 | S1445 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | IntakeCam VVT | View on Amazon |
| STANDARD MOTOR PRODUCTS Fits: 4.0L V6 | VVT548 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Intake | View on Amazon |
| WELLS Fits: 4.0L V6 | 3T1033 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Intake | View on Amazon |
This table covers the cam phaser sprockets used by the variable-valve-timing system.
9 Variable Valve Timing (VVT) Sprocket parts are listed for the 2019 Nissan Frontier, from AUTOTECNICA, DORMAN, ASTEMO / HITACHI and 6 other brands. ASTEMO / HITACHI VTG0024 carries the "Popular" badge.
Economy: 2 parts, from AUTOTECNICA and DORMAN. A representative part number is AUTOTECNICA NI1422640.
The Standard Replacement section: 7 options from ASTEMO / HITACHI, GATES, ACKOJA and 4 other brands. ASTEMO / HITACHI VTG0024 is listed in this group.
Part numbers include ASTEMO / HITACHI VTG0024, AUTOTECNICA NI1422640 and DORMAN 916589, among others listed above.
Variable Valve Timing (VVT) Sprocket Bolt
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| CLOYES Fits: 4.0L V6 | VCB111 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| FVP Fits: 4.0L V6 | VCB111 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the Variable Valve Timing (VVT) Sprocket bolts.
2 Variable Valve Timing (VVT) Sprocket Bolt parts for the 2019 Nissan Frontier come from 2 brands — CLOYES and FVP.
Listed part numbers: CLOYES VCB111, plus the other parts above.
Buying Engine Parts for a 2019 Nissan Frontier
On this vehicle, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components.
- Match the engine first. Some engine parts fit every engine; others are engine-specific. Each row shows which engine(s) it fits.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Oil and Variable Valve Timing (VVT) Solenoid / Actuator .
Frequently Asked Questions
How many engine parts fit the 2019 Nissan Frontier?
Our catalog currently lists 516 engine parts for the 2019 Nissan Frontier across 60 subcategories and 70 brands, covering both the 2.5L L4 and the 4.0L V6. Each part is matched to the engine(s) it fits.
Do engine parts differ between 2019 Nissan Frontier engines?
Some do. 93 parts fit every engine; the other 423 are engine-specific. Each row (and the filter at the top) shows which. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.
What are the signs of engine problems on a 2019 Nissan Frontier?
Common symptoms include oil spots under the vehicle, blue or white exhaust smoke, ticking from the valvetrain, or coolant mysteriously disappearing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What oil viscosity is listed for the 2019 Nissan Frontier?
Oil rows on this page include SAE 0W-30 and SAE 5W-30. Confirm the engine and the weight on the filler cap before you buy — high-mileage and standard fills can differ.
What should I replace at the same time?
Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2019 Nissan Frontier was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 2019 Nissan Frontier?
First match the engine — each row shows which engine(s) the part fits. Then engine hard parts are unforgiving of guesswork — confirm the casting or engine code before ordering, because one model year can hide two different blocks. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 2019 Nissan Frontier
Engine Parts for Other Nissan Frontier Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.