2008 Peugeot 207 Engine Parts

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Camshaft Seal parts for the 2008 Peugeot 207 come from 2 brands — SCHAEFFLER and SKF.

Listed part numbers: SCHAEFFLER SS2511 and SKF 14707.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

KING ENGINE BEARINGS supplies the 3 Connecting Rod Bearing parts for the 2008 Peugeot 207.

In the High Performance grade, KING ENGINE BEARINGS supplies 2 parts: engineered beyond original-equipment specification. A representative part number is KING ENGINE BEARINGS CR4633XP.

The Standard Replacement section lists 1 option from KING ENGINE BEARINGS — built to original-equipment specification. KING ENGINE BEARINGS CR4633SM is listed in this group.

Part numbers include KING ENGINE BEARINGS CR4633XP, KING ENGINE BEARINGS CR4633XPX and KING ENGINE BEARINGS CR4633SM.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

2 Conversion / Lower Gasket Set parts are listed for the 2008 Peugeot 207, from AJUSA and ELRING.

This group includes AJUSA 54164500 and ELRING 376330.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

3 Crankshaft Main Bearing parts for the 2008 Peugeot 207 come from KING ENGINE BEARINGS.

The High Performance section: 2 options from KING ENGINE BEARINGS. KING ENGINE BEARINGS MB5758XP is listed in this group.

Standard Replacement: 1 part, from KING ENGINE BEARINGS. A representative part number is KING ENGINE BEARINGS MB5758SI.

Listed part numbers: KING ENGINE BEARINGS MB5758XP, KING ENGINE BEARINGS MB5758XPX and KING ENGINE BEARINGS MB5758SI.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Crankshaft Seal parts for the 2008 Peugeot 207 come from 2 brands — AJUSA and ELRING.

This group includes AJUSA 15094500, AJUSA 15094200 and ELRING 004450 and the remaining parts above.

This table covers the bolts that clamp the cylinder head to the block. Read more

2 Cylinder Head Bolt parts are listed for the 2008 Peugeot 207, from AJUSA and ELRING.

Listed part numbers: AJUSA 81044100 and ELRING 426830.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Cylinder Head Gasket parts are listed for the 2008 Peugeot 207, from ELRING and AJUSA.

Part numbers include AJUSA 10187100, ELRING 729041 and ELRING 295751, among others listed above.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

One part is listed for the 2008 Peugeot 207 — AJUSA 52273200.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

One part is listed for the 2008 Peugeot 207 — AJUSA 50292000.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

One part is listed for the 2008 Peugeot 207 — CONTINENTAL VD1122.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Intake Manifold Gasket parts are listed for the 2008 Peugeot 207, from AJUSA and ELRING.

This group includes AJUSA 24036700 and ELRING 893600.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

4 Motor Mount parts for the 2008 Peugeot 207 come from DEA / MARMON RIDE CONTROL.

This group includes DEA / MARMON RIDE CONTROL AM704, DEA / MARMON RIDE CONTROL AM700 and DEA / MARMON RIDE CONTROL AM701 and the remaining parts above.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

3 Oil parts for the 2008 Peugeot 207 come from VALVOLINE.

Part numbers include VALVOLINE VV966, VALVOLINE 881166 and VALVOLINE 881050.

This table covers the gaskets that seal the Oil Cooler. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 2008 Peugeot 207 — AJUSA 77011100.

This table covers the seals at the Oil Cooler. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

One part is listed for the 2008 Peugeot 207 — AJUSA 01206600.

This table covers the drain plugs in the oil pan. Read more

2 Oil Drain Plug parts for the 2008 Peugeot 207 come from ELRING.

Listed part numbers: ELRING 523450 and ELRING 523470.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Oil Drain Plug Gasket parts are listed for the 2008 Peugeot 207, from AJUSA and ELRING.

Listed part numbers: AJUSA 18001200 and ELRING 813052.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

9 Oil Filter parts for the 2008 Peugeot 207 come from 9 brands — CHAMP / LUBER-FINER, FVP, PRO-TEC and 6 other brands. The "Popular" part is MANN HU71151X.

The Economy section lists 5 options from CHAMP / LUBER-FINER, FVP, PRO-TEC and 2 other brands — the catalog's value-priced group. CHAMP / LUBER-FINER P978 is listed in this group.

Standard Replacement: 4 parts, from MANN, WIX, ACDELCO and 1 other brand. A representative part number is MANN HU71151X.

This group includes MANN HU71151X, CHAMP / LUBER-FINER P978 and FVP G7512 and the remaining parts above.

This table covers the seals at the Oil Filter Housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: ELRING 473830.

This table covers the chains that drive the oil pump. Read more

One part is listed for the 2008 Peugeot 207 — INA ZC0237.

This table covers the rings that seal each piston to the cylinder wall. Read more

One part is listed for the 2008 Peugeot 207 — HASTINGS MANUFACTURING 2D7431S.

This table covers the timing chains that keep the cams in time with the crank. Read more

INA supplies both parts for the 2008 Peugeot 207.

This group includes INA ZCC774 and INA ZC0170.

This table covers kits that group a timing chain with the related tensioners and guides. Read more

2 Timing Chain & Component Kit parts for the 2008 Peugeot 207 come from INA.

Part numbers include INA ZC0104K and INA ZC0105K.

This table covers the Turbocharger Coolant lines. Typical signs include a wet fitting, a rusted pipe, or a pressure loss in this circuit. Flare or thread the new line the way the notes specify; a kinked replacement will fail early. Read more

2 Turbocharger Coolant Line parts for the 2008 Peugeot 207 come from AJUSA.

This group includes AJUSA WP0020 and AJUSA WP0021.

This table covers the gaskets that seal the Turbocharger. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Turbocharger Gasket parts are listed for the 2008 Peugeot 207, from AJUSA and ELRING.

Part numbers include AJUSA 01207600, AJUSA JTC11858 and ELRING 737720.

This table covers the fasteners that mount the turbocharger. Read more

One part is listed for the 2008 Peugeot 207 — ELRING 376340.

This table covers the Turbocharger Oil lines. Typical signs include a wet fitting, a rusted pipe, or a pressure loss in this circuit. Flare or thread the new line the way the notes specify; a kinked replacement will fail early. Read more

2 Turbocharger Oil Line parts for the 2008 Peugeot 207 come from AJUSA.

Part numbers include AJUSA OP10220 and AJUSA OPR00016.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: AJUSA 56044100.

This table covers the lifters / tappets that transfer cam motion to the valves. Read more

2 Valve Lifter parts for the 2008 Peugeot 207 come from 2 brands — AJUSA and INA.

Listed part numbers: AJUSA 85019600 and INA VT0226.

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Valve Stem Seal parts for the 2008 Peugeot 207 come from 2 brands — AJUSA and ELRING.

This group includes AJUSA 57053200, AJUSA 12029300 and ELRING 747210.