This page lists 29 engine parts for the 2008 Peugeot 607, across 13 part types, covering the 2.9L V6 engine. Every part shows its brand, manufacturer part number and fitment notes.
On the 2008 Peugeot 607, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components. Most of the listed parts are Cylinder Head Gasket (6 parts), Oil Filter (6 parts) and Crankshaft Seal (4 parts). The other 10 part types cover the remaining 13 parts.
The 2008 Peugeot 607 came with a single engine, the 2.9L V6, and every part is verified against it.
10 brands supply engine parts for the 2008 Peugeot 607, led by AJUSA (17 parts), VALVOLINE (3 parts) and ELRING (2 parts), plus 7 more brands. Quality grades include Economy and Standard Replacement.
A "Popular" badge means the source catalog flagged the part as frequently chosen for the 2008 Peugeot 607. 2 parts have it, including PRO-TEC PXL51381 (Oil Filter) and WIX 51381 (Oil Filter). Each part number opens a page with every vehicle that part fits.
Camshaft Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA | 15062600 | 🇲🇽 MX | 38 x 50 x 6Clockwise | View on Amazon |
This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
This group shows a single part: AJUSA 15062600.
Conversion / Lower Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA | 54091800 | 🇲🇽 MX | View on Amazon |
This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
One part is listed for the 2008 Peugeot 607 — AJUSA 54091800.
Crankshaft Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA | 15054000 | 🇲🇽 MX | Rear98 x 120 x 7 | View on Amazon |
| AJUSA | 15084900 | 🇲🇽 MX | FrontClockwise | View on Amazon |
| ELRING | 148230 | 🇲🇽 MX | Front | View on Amazon |
| ELRING | 509930 | 🇲🇽 MX | Transmission Side | View on Amazon |
This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
4 Crankshaft Seal parts for the 2008 Peugeot 607 come from 2 brands — AJUSA and ELRING.
Listed part numbers: AJUSA 15054000, AJUSA 15084900 and ELRING 148230, plus the other parts above.
Cylinder Head Bolt
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA | 81049700 | 🇲🇽 MX | View on Amazon |
This table covers the bolts that clamp the cylinder head to the block.
One part is listed for the 2008 Peugeot 607 — AJUSA 81049700.
Cylinder Head Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA | 52204800 | 🇲🇽 MX | Right | View on Amazon |
| AJUSA | 10147000 | 🇲🇽 MX | Multi Layered Steel | View on Amazon |
| AJUSA | 10147010 | 🇲🇽 MX | Multi Layered Steel | View on Amazon |
| AJUSA | 10147100 | 🇲🇽 MX | Multi Layered Steel | View on Amazon |
| AJUSA | 10147110 | 🇲🇽 MX | Multi Layered Steel | View on Amazon |
| AJUSA | 52204900 | 🇲🇽 MX | Left | View on Amazon |
This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
AJUSA supplies the 6 Cylinder Head Gasket parts for the 2008 Peugeot 607.
This group includes AJUSA 52204800, AJUSA 10147000 and AJUSA 10147010 and the remaining parts above.
Cylinder Head Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA | 52204700 | 🇲🇽 MX | Complete Set | View on Amazon |
This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
One part is listed for the 2008 Peugeot 607 — AJUSA 52204700.
Engine Kit Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA | 50220400 | 🇲🇽 MX | View on Amazon |
This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
One part is listed for the 2008 Peugeot 607 — AJUSA 50220400.
Intake Manifold Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA | 01048500 | 🇲🇽 MX | Left | View on Amazon |
| AJUSA | 13180400 | 🇲🇽 MX | Right | View on Amazon |
This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
AJUSA supplies both parts for the 2008 Peugeot 607.
Part numbers include AJUSA 01048500 and AJUSA 13180400.
Motor Mount
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DEA / MARMON RIDE CONTROL | AM712 | 🇲🇽 MX | Front Right | View on Amazon |
This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes.
This group shows a single part: DEA / MARMON RIDE CONTROL AM712.
Oil
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| VALVOLINE | VV966 | 🇲🇽 MX | European Vehicle Full Synthetic SAE 5W-401 Quart | View on Amazon |
| VALVOLINE | 881166 | 🇲🇽 MX | European Vehicle Full Synthetic SAE 5W-40Easy Pour 5 Quart | View on Amazon |
| VALVOLINE | 881050 | 🇲🇽 MX | European Vehicle Full Synthetic SAE 5W-405 Gallon Bay Box | View on Amazon |
This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable.
3 Oil parts for the 2008 Peugeot 607 come from VALVOLINE.
Listed part numbers: VALVOLINE VV966, VALVOLINE 881166 and VALVOLINE 881050.
Oil Filter
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| PRO-TEC Popular | PXL51381 | 🇲🇽 MX | View on Amazon | |
| PUROLATOR | L10193 | 🇲🇽 MX | Bypass Relief Valve Setting: 15-18 PSIMedia Material: Cellulose | View on Amazon |
| VARIOUS MFR | PG7662 | 🇲🇽 MX | Spin-On | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| WIX Popular | 51381 | 🇲🇽 MX | Bypass Relief Valve Setting: 13-19 PSIMedia Material: Enhanced Cellulose | View on Amazon |
| MAHLE / CLEVITE | OC976 | 🇲🇽 MX | View on Amazon | |
| MANN | W9171 | 🇲🇽 MX | Anti-Drain Back Valve: YESBypass Relief Valve Setting: 16 PSI | View on Amazon |
This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive.
6 Oil Filter parts for the 2008 Peugeot 607 come from 6 brands — PRO-TEC, PUROLATOR, VARIOUS MFR and 3 other brands. The "Popular" part is PRO-TEC PXL51381.
The Economy section lists 3 options from PRO-TEC, PUROLATOR and VARIOUS MFR — the catalog's value-priced group. PRO-TEC PXL51381 is listed in this group.
In the Standard Replacement grade, WIX, MAHLE / CLEVITE and MANN supply 3 parts: built to original-equipment specification. A representative part number is WIX 51381.
Listed part numbers: PRO-TEC PXL51381, PUROLATOR L10193 and VARIOUS MFR PG7662, plus the other parts above.
Valve Lifter
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA | 85014300 | 🇲🇽 MX | View on Amazon |
This table covers the lifters / tappets that transfer cam motion to the valves.
This group shows a single part: AJUSA 85014300.
Valve Stem Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA | 57057800 | 🇲🇽 MX | View on Amazon |
This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
This group shows a single part: AJUSA 57057800.
Buying Engine Parts for a 2008 Peugeot 607
On this vehicle, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components.
- Confirm you have the 2.9L V6 engine — every part on this page is matched to it.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Cylinder Head Gasket and Oil Filter .
Frequently Asked Questions
How many engine parts fit the 2008 Peugeot 607?
Our catalog currently lists 29 engine parts for the 2008 Peugeot 607 across 13 subcategories and 10 brands, covering the 2.9L V6 engine. Each part is matched to the engine(s) it fits.
What are the signs of engine problems on a 2008 Peugeot 607?
Common symptoms include oil spots under the vehicle, blue or white exhaust smoke, ticking from the valvetrain, or coolant mysteriously disappearing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What oil viscosity is listed for the 2008 Peugeot 607?
Oil rows on this page include SAE 5W-40. Confirm the engine and the weight on the filler cap before you buy — high-mileage and standard fills can differ.
What should I replace at the same time?
Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2008 Peugeot 607 was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 2008 Peugeot 607?
Every part on this page is matched to the 2.9L V6 engine. Then engine hard parts are unforgiving of guesswork — confirm the casting or engine code before ordering, because one model year can hide two different blocks. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 2008 Peugeot 607
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.