2009 Peugeot 206 Engine Parts

Engine:

Showing parts for every engine. Select an engine to see only what fits.

72 Engine parts are listed for the 2009 Peugeot 206, in 24 part types, covering both the 1.4L L4 and the 1.6L L4. Each one has a brand, a manufacturer part number and notes that say where it fits.

On the 2009 Peugeot 206, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components. 20 parts of the 72 listed are Crankshaft Seal (9 parts), Oil Filter (7 parts) and Cylinder Head Gasket (4 parts). The other 21 part types cover the remaining 52 parts.

Camshaft

Brand Part Number Markets Notes Buy
AJUSA Fits: 1.4L L4 93123000
🇲🇽 MX
View on
Amazon
AJUSA Fits: 1.6L L4 93123500
🇲🇽 MX
Intake
View on
Amazon
AJUSA Fits: 1.6L L4 93123600
🇲🇽 MX
Exhaust
View on
Amazon

This table covers the camshafts that open the valves.

Camshaft Seal

Brand Part Number Markets Notes Buy
AJUSA Fits: 1.4L L4 15014700
🇲🇽 MX
36 x 50 x 7Clockwise
View on
Amazon
AJUSA Fits: 1.6L L4 15091700
🇲🇽 MX
CLOCKWISE
View on
Amazon
ELRING Fits: 1.6L L4 135140
🇲🇽 MX
Height [MM]: 6Material: FPM (fluoride rubber)
Fitment notes — ELRING 135140
Height [MM]: 6Material: FPM (fluoride rubber)Swirl Type: Right-hand TwistFront
View on
Amazon

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Conversion / Lower Gasket Set

Brand Part Number Markets Notes Buy
AJUSA Fits: 1.4L L4 54131300
🇲🇽 MX
View on
Amazon
AJUSA Fits: 1.6L L4 54164100
🇲🇽 MX
View on
Amazon
ELRING Fits: 1.6L L4 431610
🇲🇽 MX
with Crankshaft Seal
View on
Amazon

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.

Crankshaft Seal

Brand Part Number Markets Notes Buy
ELRING Popular Fits: all 2009 206 engines 369470
🇲🇽 MX
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber)
Fitment notes — ELRING 369470
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber)
RearTransmission Side
View on
Amazon
VICTOR REINZ Popular Fits: all 2009 206 engines 813853200
🇲🇽 MX
FrontReplaces OE Part Number(s) 0514A2
View on
Amazon
AJUSA Fits: 1.4L L4 15084700
🇲🇽 MX
Rear85 x 105 x 9
Fitment notes — AJUSA 15084700
Rear85 x 105 x 9Counter Clockwise
View on
Amazon
AJUSA Fits: 1.4L L4 15084800
🇲🇽 MX
FrontClockwise
View on
Amazon
AJUSA Fits: 1.6L L4 15094100
🇲🇽 MX
FrontClockwise
View on
Amazon
AJUSA Fits: 1.6L L4 15094200
🇲🇽 MX
Rear85 x 105 x 8
Fitment notes — AJUSA 15094200
Rear85 x 105 x 8Counter Clockwise
View on
Amazon
ELRING Fits: all 2009 206 engines 135110
🇲🇽 MX
Height [MM]: 9Material: FPM (fluoride rubber)/ACM (polyacrylate rubber)
Fitment notes — ELRING 135110
Height [MM]: 9Material: FPM (fluoride rubber)/ACM (polyacrylate rubber)Swirl Type: Left-hand Twist
RearTransmission Side
View on
Amazon
ELRING Fits: 1.4L L4 369530
🇲🇽 MX
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber)
Fitment notes — ELRING 369530
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber)
Front
View on
Amazon
ELRING Fits: 1.4L L4 505740
🇲🇽 MX
Material: FPM (fluoride rubber)/ACM (polyacrylate rubber)
Fitment notes — ELRING 505740
Material: FPM (fluoride rubber)/ACM (polyacrylate rubber)
Front
View on
Amazon

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Cylinder Head Bolt

Brand Part Number Markets Notes Buy
AJUSA Fits: 1.4L L4 81006700
🇲🇽 MX
View on
Amazon
AJUSA Fits: 1.6L L4 81044200
🇲🇽 MX
View on
Amazon
ELRING Fits: 1.6L L4 431440
🇲🇽 MX
Set
View on
Amazon

This table covers the bolts that clamp the cylinder head to the block.

Cylinder Head Gasket

Brand Part Number Markets Notes Buy
AJUSA Fits: 1.4L L4 10155600
🇲🇽 MX
Thickness: 1.25 MM
Fitment notes — AJUSA 10155600
Thickness: 1.25 MM
76 Bore Diameter
View on
Amazon
AJUSA Fits: 1.4L L4 10155610
🇲🇽 MX
Thickness: 1.6 MM
Fitment notes — AJUSA 10155610
Thickness: 1.6 MM
76 Bore Diameter
View on
Amazon
AJUSA Fits: 1.6L L4 10155800
🇲🇽 MX
Multi Layered Steel
Fitment notes — AJUSA 10155800
Multi Layered Steel
79.5 Bore Diameter
View on
Amazon
ELRING Fits: 1.6L L4 384420
🇲🇽 MX
View on
Amazon

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Cylinder Head Gasket Set

Brand Part Number Markets Notes Buy
AJUSA Fits: 1.4L L4 52216500
🇲🇽 MX
View on
Amazon
AJUSA Fits: 1.6L L4 52409500
🇲🇽 MX
To Engine # 233722
View on
Amazon
AJUSA Fits: 1.6L L4 52451100
🇲🇽 MX
From Engine # 233723
View on
Amazon
ELRING Fits: 1.6L L4 430840
🇲🇽 MX
with valve stem seals
View on
Amazon

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.

Cylinder Repair Sleeve

Brand Part Number Markets Notes Buy
AJUSA Fits: 1.4L L4 60002600
🇲🇽 MX
View on
Amazon

This table covers the wear sleeves used to restore a Cylinder seal surface.

Engine Kit Gasket Set

Brand Part Number Markets Notes Buy
AJUSA Fits: 1.4L L4 50232400
🇲🇽 MX
View on
Amazon
AJUSA Fits: 1.6L L4 50371300
🇲🇽 MX
To Engine # 233722
View on
Amazon
AJUSA Fits: 1.6L L4 50371200
🇲🇽 MX
From Engine # 233723
View on
Amazon

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.

Exhaust Valve

Brand Part Number Markets Notes Buy
QUALCAST Fits: 1.4L L4 1030117
🇲🇽 MX
1.150 Head Diameter.
View on
Amazon
QUALCAST Fits: 1.6L L4 1030127
🇲🇽 MX
0.965 Head Diameter.
View on
Amazon

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one.

Harmonic Balancer

Brand Part Number Markets Notes Buy
DORMAN Fits: 1.6L L4 594487
🇲🇽 MX
View on
Amazon

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine.

Intake Manifold Gasket

Brand Part Number Markets Notes Buy
AJUSA Fits: 1.4L L4 77013200
🇲🇽 MX
View on
Amazon
ELRING Fits: 1.6L L4 258780
🇲🇽 MX
View on
Amazon

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Intake Plenum Gasket

Brand Part Number Markets Notes Buy
AJUSA Fits: 1.4L L4 28006000
🇲🇽 MX
View on
Amazon
AJUSA Fits: 1.6L L4 24023100
🇲🇽 MX
View on
Amazon

This table covers the gaskets that seal the Intake Plenum. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Intake Valve

Brand Part Number Markets Notes Buy
QUALCAST Fits: 1.4L L4 1030116
🇲🇽 MX
1.445 Head Diameter.
View on
Amazon
QUALCAST Fits: 1.6L L4 1030126
🇲🇽 MX
1.232 Head Diameter.
View on
Amazon

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one.

Motor Mount

Brand Part Number Markets Notes Buy
DEA / MARMON RIDE CONTROL Fits: all 2009 206 engines AM704
🇲🇽 MX
Front Left
View on
Amazon
DEA / MARMON RIDE CONTROL Fits: all 2009 206 engines AM700
🇲🇽 MX
Front
View on
Amazon
DEA / MARMON RIDE CONTROL Fits: all 2009 206 engines AM701
🇲🇽 MX
RearManual trans.
View on
Amazon
DEA / MARMON RIDE CONTROL Fits: all 2009 206 engines AM716
🇲🇽 MX
Front Right
View on
Amazon

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes.

Oil Drain Plug

Brand Part Number Markets Notes Buy
ELRING Fits: all 2009 206 engines 434941
🇲🇽 MX
with Seal RingBolt Head-/Nut Design: Inner rectangle
Fitment notes — ELRING 434941
with Seal RingBolt Head-/Nut Design: Inner rectangleThread Size: M16X1,5x12
View on
Amazon
ELRING Fits: all 2009 206 engines 390430
🇲🇽 MX
without Seal RingBolt Head-/Nut Design: Inner rectangle
View on
Amazon
ELRING Fits: all 2009 206 engines 434940
🇲🇽 MX
with Seal RingBolt Head-/Nut Design: Inner rectangle
Fitment notes — ELRING 434940
with Seal RingBolt Head-/Nut Design: Inner rectangleThread Size: M16X1.5x12
View on
Amazon

This table covers the drain plugs in the oil pan.

Oil Drain Plug Gasket

Brand Part Number Markets Notes Buy
AJUSA Fits: 1.4L L4 00502300
🇲🇽 MX
Multi Layered Steel
View on
Amazon
AJUSA Fits: 1.6L L4 20003300
🇲🇽 MX
View on
Amazon
ELRING Fits: all 2009 206 engines 834823
🇲🇽 MX
material: NBR (nitrile butadiene rubber)
View on
Amazon

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Oil Filter

Economy

Brand Part Number Markets Notes Buy
FVP Fits: all 2009 206 engines G7512
🇲🇽 MX
OE# 1109 AH
View on
Amazon
PRO-TEC Fits: all 2009 206 engines PXL57512
🇲🇽 MX
View on
Amazon
PUROLATOR Fits: all 2009 206 engines L15830
🇲🇽 MX
Class: CStyle: Cartridge Lube Metal Free Filter
View on
Amazon
VARIOUS MFR Fits: all 2009 206 engines PG5830EX
🇲🇽 MX
Extended LifeCartridge Filter
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
MANN Popular Fits: all 2009 206 engines HU71151X
🇲🇽 MX
Includes Gasket / Seal(s)
View on
Amazon
WIX Popular Fits: all 2009 206 engines 57512
🇲🇽 MX
Sold Individually
View on
Amazon
MAHLE / CLEVITE Fits: all 2009 206 engines OX555
🇲🇽 MX
Cartridge
View on
Amazon

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive.

Oil Filter Gasket

Brand Part Number Markets Notes Buy
ELRING Fits: 1.6L L4 399510
🇲🇽 MX
View on
Amazon

This table covers the gaskets that seal the Oil Filter. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Piston Ring

Brand Part Number Markets Notes Buy
HASTINGS MANUFACTURING Fits: 1.4L L4 2C9372S
🇲🇽 MX
Chrome Top Ring1 Cylinder Set
Fitment notes — HASTINGS MANUFACTURING 2C9372S
Chrome Top Ring1 Cylinder SetFor 2 Ring Piston
View on
Amazon
HASTINGS MANUFACTURING Fits: 1.4L L4 2C9372
🇲🇽 MX
Full SetChrome Top Ring
Fitment notes — HASTINGS MANUFACTURING 2C9372
Full SetChrome Top RingTop Groove: 1.75 mm2nd Groove: 2.00 mm1ST Oil Groove: 3.00 mmTop Ring Surface Treatment: Chrome
Engine. Bore (in.): 2.953
View on
Amazon
HASTINGS MANUFACTURING Fits: 1.6L L4 2C9369S
🇲🇽 MX
1 Cylinder SetChrome Top Ring
Fitment notes — HASTINGS MANUFACTURING 2C9369S
1 Cylinder SetChrome Top RingTop Groove: 1.20 mm2nd Groove: 1.50 mm1st Oil Groove: 2.50 mmFor 2 Ring Piston
Engine. Bore (in.): 3.091
View on
Amazon
HASTINGS MANUFACTURING Fits: 1.6L L4 2C9369
🇲🇽 MX
Full SetTop Ring Surface Treatment: Chrome
Fitment notes — HASTINGS MANUFACTURING 2C9369
Full SetTop Ring Surface Treatment: ChromeTop Groove: 1.20 mm2nd Groove: 1.50 mm1ST Oil Groove: 2.50 mmfor 2 Ring Piston
Engine. Bore (in.): 3.091
View on
Amazon

This table covers the rings that seal each piston to the cylinder wall.

Timing Belt Tensioner

Brand Part Number Markets Notes Buy
GMB Fits: 1.6L L4 4565713
🇲🇽 MX
View on
Amazon

This table covers the Timing Belt tensioners. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage.

Timing Cover Gasket

Brand Part Number Markets Notes Buy
AJUSA Fits: 1.4L L4 77099200
🇲🇽 MX
View on
Amazon

This table covers the gaskets that seal the Timing Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Valve Cover Gasket

Brand Part Number Markets Notes Buy
AJUSA Fits: 1.4L L4 11023900
🇲🇽 MX
View on
Amazon
AJUSA Fits: 1.6L L4 11117200
🇲🇽 MX
From Engine # 233723
View on
Amazon
AJUSA Fits: 1.6L L4 11098000
🇲🇽 MX
View on
Amazon
ELRING Fits: 1.6L L4 240820
🇲🇽 MX
View on
Amazon

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Valve Stem Seal

Brand Part Number Markets Notes Buy
AJUSA Fits: 1.4L L4 57013400
🇲🇽 MX
View on
Amazon
AJUSA Fits: 1.6L L4 57023600
🇲🇽 MX
View on
Amazon

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Buying Engine Parts for a 2009 Peugeot 206

On this vehicle, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components.

  • Match the engine first. Some engine parts fit every engine; others are engine-specific. Each row shows which engine(s) it fits.
  • Read the notes on each row for position, trim and spec qualifiers before you order.
  • Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
  • Cross-reference the manufacturer part number against your old part or a service-manual listing.

Start with the largest groups on this page: Crankshaft Seal and Oil Filter .

Frequently Asked Questions

How many engine parts fit the 2009 Peugeot 206?

Our catalog currently lists 72 engine parts for the 2009 Peugeot 206 across 24 subcategories and 15 brands, covering both the 1.4L L4 and the 1.6L L4. Each part is matched to the engine(s) it fits.

Do engine parts differ between 2009 Peugeot 206 engines?

Some do. 18 parts fit every engine; the other 54 are engine-specific. Each row (and the filter at the top) shows which. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.

What are the signs of engine problems on a 2009 Peugeot 206?

Common symptoms include oil spots under the vehicle, blue or white exhaust smoke, ticking from the valvetrain, or coolant mysteriously disappearing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.

What should I replace at the same time?

Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.

What do the market flags (US, CA, MX) on each part mean?

They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2009 Peugeot 206 was originally sold in the US, the safest choice is a part marked for the US market.

How do I make sure a part fits my 2009 Peugeot 206?

First match the engine — each row shows which engine(s) the part fits. Then engine hard parts are unforgiving of guesswork — confirm the casting or engine code before ordering, because one model year can hide two different blocks. The notes column carries position and trim qualifiers where they apply.

Other Parts for the 2009 Peugeot 206

Engine Parts for Other Peugeot 206 Years

Switch vehicle or jump to a subcategory

Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.